Journal de Physique IV

Thermal activation based constitutive equations for polymers p. Pr9-3

F.J. Zerilli et R.W. Armstrong

DOI: https://doi.org/10.1051/jp4:2000901

From rate independent to rate dependent constitutive behaviours for wave motions studies p. Pr9-9

P. Guélin et W.K. Nowacki

DOI: https://doi.org/10.1051/jp4:2000902

Computational modeling and wave propagation in media with inelastic deforming microstructure p. Pr9-15

D.E. Grady, N.A. Winfree, G.I. Kerley, L.T. Wilson et L.D. Kuhns

DOI: https://doi.org/10.1051/jp4:2000903

High strain rate constitutive modeling of aluminum nitride including a first-order phase transformation p. Pr9-21

T.J. Holmquist, D.W. Templeton et K.D. Bishnoi

DOI: https://doi.org/10.1051/jp4:2000904

Viscoelastoplastic thermomechanical constitutive patterns at high rates of strain p. Pr9-27

G. Bles, W.K. Nowacki et A. Tourabi

DOI: https://doi.org/10.1051/jp4:2000905

A dynamic constitutive equation and its experimental verification p. Pr9-33

S. Tanimura, K. Mimura et W. Zhu

DOI: https://doi.org/10.1051/jp4:2000906

A path-dependent constitutive model for gilding copper p. Pr9-39

P.J. Gould et B.D. Goldthorpe

DOI: https://doi.org/10.1051/jp4:2000907

On the dynamic behavior of A5 aluminum. Two thermally activated deformation mechanisms and high strain modeling p. Pr9-45

J. Farré et C. Mathieu

DOI: https://doi.org/10.1051/jp4:2000908

Observation and modeling of dynamic recrystallization in high-strain, high-strain rate deformation of metals p. Pr9-51

M.A. Meyers, V.F. Nesterenko, J.C. LaSalvia, Y.B. Xu et Q. Xue

DOI: https://doi.org/10.1051/jp4:2000909

Transition in rate controlling mechanism of FFC metals at very high strain rates and high temperatures p. Pr9-57

K. Sakino

DOI: https://doi.org/10.1051/jp4:2000910

Strain rate dependence of strength-differential effect in two steels p. Pr9-63

L.W. Meyer et S. Abdel-Malek

DOI: https://doi.org/10.1051/jp4:2000911

Validation of a path-dependent constitutive model for FCC and BCC metals using "symmetric" Taylor impact p. Pr9-69

S.M. Walley, P.D. Church, R. Townsley et J.E. Field

DOI: https://doi.org/10.1051/jp4:2000912

Evaluation of constitutive relations for high strain rate behaviour using the Taylor test p. Pr9-75

J. Buchar, M. Forejt, M. Jopek et I. Krivanek

DOI: https://doi.org/10.1051/jp4:2000913

Thermo-mechanical constitutive equations for brittle porous materials p. Pr9-81

E. Bar-on, M.B. Rubin et D.Z. Yankelevsky

DOI: https://doi.org/10.1051/jp4:2000914

Modified Hill yield criterion for better prediction of quasi static and dynamic behavior p. Pr9-87

J. Farré et S. Lamalle

DOI: https://doi.org/10.1051/jp4:2000915

A new approach for the modeling of the dynamic expansion of a tantalum sphere. Analysis of the coupled influences of manufacturing operations and anisotropic behavior p. Pr9-93

F. Llorca et J. Farré

DOI: https://doi.org/10.1051/jp4:2000916

Wave propagation and strain localization in dynamically loaded specimen p. Pr9-99

A. Glema, T. Lodygowski et P. Perzyna

DOI: https://doi.org/10.1051/jp4:2000917

Shock-wave consolidation of micropowders of super-hard and diamond composite materials p. Pr9-107

P.A. Vityaz, O.V. Roman, G.V. Smimov et A.A. Komorny

DOI: https://doi.org/10.1051/jp4:2000918

Deformational structure and properties of Cu-Mo explosive compacts p. Pr9-113

V.I. Maly et T.S. Teslenko

DOI: https://doi.org/10.1051/jp4:2000919

Using explosive energy for processing aluminum matrix composites p. Pr9-119

V. Popov, V. Gulbin et E. Sungurov

DOI: https://doi.org/10.1051/jp4:2000920

Metallic behavior in the center of deformation when pulse-magnetic cropping an allowance of hollow billets p. Pr9-123

V. Glouschenkov et A. Bourmistrov

DOI: https://doi.org/10.1051/jp4:2000921

Mechanical behaviour of a sand bed subjected to low energy dynamic compaction, modelled in a geotechnical centrifuge p. Pr9-131

M. Parvizi et C.M. Merrifield

DOI: https://doi.org/10.1051/jp4:2000922

Flow stress equation with effect of strain-rate and temperature histories under processing p. Pr9-137

T. Shirakashi et M. Yoshino

DOI: https://doi.org/10.1051/jp4:2000923

Peculiarities of the formation of TiNi-based compounds in conditions of the shock compression p. Pr9-143

S.M. Usherenko, A.R. Louchenok et L.O. Zvorykin

DOI: https://doi.org/10.1051/jp4:2000924

Dynamic tensile testing of sheet metal p. Pr9-149

P. Mouro, G. Gary et H. Zhao

DOI: https://doi.org/10.1051/jp4:2000925

Adaptation of a flywhell to aluminium alloy for studying the influence of a fatigue predamage on its dynamic plasticity p. Pr9-155

T. Auzanneau, C. Froustey, J.-L. Charles et J.-L. Lataillade

DOI: https://doi.org/10.1051/jp4:2000926

Biaxial direct tensile tests in a large range of strain rates. Results on a ferritic nuclear steel p. Pr9-161

C. Albertini, K. Labibes, M. Montagnani, E.V. Pizzinato, G. Solomos et B. Viaccoz

DOI: https://doi.org/10.1051/jp4:2000927

Evaluation of impact tensile properties of adhesive butt joints p. Pr9-167

T. Yokoyama et Y. Sogabe

DOI: https://doi.org/10.1051/jp4:2000928

Measurements of impact tensile strength of concrete and mortar using reflected tensile stress waves p. Pr9-173

M. Daimaruya et H. Kobayashi

DOI: https://doi.org/10.1051/jp4:2000929

Symmetric Taylor testing procedures for material strength ranging from 400 to 2000 MPa p. Pr9-179

H. Couque

DOI: https://doi.org/10.1051/jp4:2000930

Visualization of impact force using pressure sensitive paper "Prescale" p. Pr9-185

K. Ogawa et T. Yokoyama

DOI: https://doi.org/10.1051/jp4:2000931

Behavior of Ti-6Al-4V alloy at high strain rates, shear testing up to 6 x 10^E4 1/s and failure criterion p. Pr9-191

J.R. Klepaczko

DOI: https://doi.org/10.1051/jp4:2000932

Rise in temperature during compressive Hopkinson tests p. Pr9-197

A. Nême et Y. Quirion

DOI: https://doi.org/10.1051/jp4:2000933

A wave propagation technique to measure the dynamic tensile strength of brittle materials p. Pr9-203

F. Gálvez, J. Rodríguez et V. Sánchez Gálvez

DOI: https://doi.org/10.1051/jp4:2000934

An experimental and numerical study of the ductile fracture process for rolled homogeneous armour alloy steel p. Pr9-209

E.C. Cameron, D.C. Barton, T.D. Andrews et P.D. Church

DOI: https://doi.org/10.1051/jp4:2000935

A photodiode optical deformation-measurement system for high strain-rate tensile tests p. Pr9-215

M.S. Mirza et D.C. Barton

DOI: https://doi.org/10.1051/jp4:2000936

Experimental study of adiabatic shear band propagation in impacted plates p. Pr9-221

L. Faure, J.R. Klepaczko et G. Sutter

DOI: https://doi.org/10.1051/jp4:2000937

Estimation of the stressed-strained zone after the explosive load by the holographic interferometry p. Pr9-227

A.M. Ivanov

DOI: https://doi.org/10.1051/jp4:2000938

Local shear rate in different metals under dynamic loading p. Pr9-231

S.A. Atroshenko

DOI: https://doi.org/10.1051/jp4:2000939

Measurement of dynamic response of liquid metal subjected to uniaxial strain wave p. Pr9-237

M. Futakawa, H. Kogawa et R. Hino

DOI: https://doi.org/10.1051/jp4:2000940

Measurements of temperature during dynamic shear deformation of carbon steel p. Pr9-243

W. Oliferuk, L. Kruszka et W.K. Nowacki

DOI: https://doi.org/10.1051/jp4:2000941

A device for utilising the DCB test geometry at intermediate opening velocities p. Pr9-249

R. Joannic et B. Chartier

DOI: https://doi.org/10.1051/jp4:2000942

Experimental investigation of adiabatic shear band formation in steels p. Pr9-257

R. Clos, U. Schreppel et P. Veit

DOI: https://doi.org/10.1051/jp4:2000943

A constitutive relationship for metals compensated for adiabatic and friction effects p. Pr9-263

M. Ashton et D.J. Parry

DOI: https://doi.org/10.1051/jp4:2000944

Self-organization of shear bands in Ti, Ti-6%Al-4%V, and 304 stainless steel p. Pr9-269

V.F. Nesterenko, Q. Xue et M.A. Meyers

DOI: https://doi.org/10.1051/jp4:2000945

The effect of strain rate on the through-thickness tensile stiffness and strength properties of fibre-reinforced epoxy composites p. Pr9-275

J.L. Medina et J. Harding

DOI: https://doi.org/10.1051/jp4:2000946

On impact upon brittle solids p. Pr9-281

N.K. Bourne et J.C.F. Millett

DOI: https://doi.org/10.1051/jp4:2000947

Determination of the mechanical behavior of nitrogen alloyed steels at strain rates 10³ s^-1 < dε/dt < 2 10⁶ s^-1 p. Pr9-287

H. Nahme et E. Lach

DOI: https://doi.org/10.1051/jp4:2000948

The mechanical and constitutive behaviour of as-received and irradiated Zr-2.5Nb pressure tube material under high rates of tensile strain p. Pr9-293

D.D. Radford et M.J. Worswick

DOI: https://doi.org/10.1051/jp4:2000949

Quantitative damage evolution in incipiently failed 10100 Cu p. Pr9-299

W.R. Thissell, D.A.S. Macdougall, D. Miller, K.E. Simmonds, R.K. Everett, P. Matic, R. Brooks et D. Tonks

DOI: https://doi.org/10.1051/jp4:2000950

Dynamic characterization at high temperature of MMCs with discontinuous reinforcement p. Pr9-305

M.H. Miguélez et C. Navarro

DOI: https://doi.org/10.1051/jp4:2000951

Crystallisation effects during high rate deformation of polymers p. Pr9-311

G.M. Swallowe et J.O. Fernandez

DOI: https://doi.org/10.1051/jp4:2000952

Low-velocity impact fracture behaviour of impact-resistant polymer matrix composite laminates under mixed mode loading p. Pr9-317

T. Kusaka, N. Horikawa et M. Masuda

DOI: https://doi.org/10.1051/jp4:2000953

Influence of the strain rate on the tensile strength in aluminas of different purity p. Pr9-323

F. Gálvez, J. Rodriguez et V. Sánchez Gálvez

DOI: https://doi.org/10.1051/jp4:2000954

Dynamic properties and asymmetry of tension and compression of metal matrix composites under impact loading p. Pr9-329

H. Chenguang, Z. Rongjing, D. Zhuping et R.K.Y. Li

DOI: https://doi.org/10.1051/jp4:2000955

Ductility of aluminium alloy AA7075 at high strain rates p. Pr9-335

E. El-Magd et M. Brodmann

DOI: https://doi.org/10.1051/jp4:2000956

Dynamic tensile plasticity and damage evolution in shape-memory Ni-Ti p. Pr9-341

D.A. Miller, W.R. Thissell et D.A.S. Macdougall

DOI: https://doi.org/10.1051/jp4:2000957

Optical measurements of phase transition and temperature in adiabatic shear bands in titanium alloys p. Pr9-347

N. Ranc, V. Pina et P. Hervé

DOI: https://doi.org/10.1051/jp4:2000958

Study of dynamic plastic deformation of a nitrogen alloyed steel using single and symmetric Taylor testing p. Pr9-353

H. Couque, A. Lichtenberger, E. Lach et B. Salesse

DOI: https://doi.org/10.1051/jp4:2000959

Tensile dynamic behaviour of unidirectional glass fibre-reinforced thermoset matrix composites p. Pr9-359

S. Pardo, D. Baptiste, F. Décobert, J. Fitoussi et R. Joannic

DOI: https://doi.org/10.1051/jp4:2000960

Dynamic recrystallisation in adiabatic shear bands p. Pr9-365

L.S. Tóth, A. Hildenbrand et A. Molinari

DOI: https://doi.org/10.1051/jp4:2000961

Correlation between elongation at fracture and strain rate for dynamic loading p. Pr9-371

H. Lips, M. Brodmann et E. El-Magd

DOI: https://doi.org/10.1051/jp4:2000962

Wave propagation and permanent densification in a porous steel submitted to laser-driven shocks p. Pr9-379

T. de Rességuier et J.-P. Romain

DOI: https://doi.org/10.1051/jp4:2000963

More on material similarities in long rod penetration mechanics p. Pr9-385

Z. Rosenberg et E. Dekel

DOI: https://doi.org/10.1051/jp4:2000964

Simulation of explosive fracture cylinder test using DYNA p. Pr9-391

P.D. Church, J. Macmahon, I. Softley et C. Cameron

DOI: https://doi.org/10.1051/jp4:2000965

Effects of initial temperature on spalling of metals p. Pr9-397

S. Hanim et J.R. Klepaczko

DOI: https://doi.org/10.1051/jp4:2000966

Numerical study of the propagation of an adiabatic shear band p. Pr9-403

A.-S. Lebouvier, P. Lipinski et A. Molinari

DOI: https://doi.org/10.1051/jp4:2000967

Parametric study of ductile crack propagation in aluminium panels p. Pr9-409

J.L. Medina-Velarde, N. Petrinic et C. Ruiz

DOI: https://doi.org/10.1051/jp4:2000968

Micromechanics of void growth at high rates p. Pr9-415

S. Mercier et A. Molinari

DOI: https://doi.org/10.1051/jp4:2000969

Numerical-experimental study of Armco-80 iron spall fracture p. Pr9-421

I.R. Trunin, S.V. Koritskaya, T.S. Palenova et W. Arnold

DOI: https://doi.org/10.1051/jp4:2000970

Simulations of slug impact with smoothed particle hydrodynamics: Some remarks on frequently asked questions p. Pr9-427

P. Galon, H. Bung, M. Lepareux et T. Grünenwald

DOI: https://doi.org/10.1051/jp4:2000971

Effect of strain rate change during uniaxial dynamic tensile tests on instability strain p. Pr9-433

H. Kobayashi, M. Dairnaruya, T. Nojima et T. Kajino

DOI: https://doi.org/10.1051/jp4:2000972

Application of kinetic conception to the numerical simulation of spall fracture of metals p. Pr9-439

B.L. Glushak, I.R. Trunin, O.A. Uvarova et S.V. Koritskaya

DOI: https://doi.org/10.1051/jp4:2000973

Research of MOC on stress wave propagation p. Pr9-445

M. Xu, R. Zhang et G. Zhang

DOI: https://doi.org/10.1051/jp4:2000974

Application of nonlinear programming to explosively formed projectile design p. Pr9-451

J. Houman, Z. Ruoqi et Z. Shouqi

DOI: https://doi.org/10.1051/jp4:2000975

Shear wave spreading in anisotropic medium under particular un homogenuity properties p. Pr9-457

V.A. Goloveshkin, V.A. Gordon et N.N. Kholin

DOI: https://doi.org/10.1051/jp4:2000976

Modelisation of dynamic crack propagation criteria p. Pr9-461

T. Karimzada et H. Maigre

DOI: https://doi.org/10.1051/jp4:2000977

Discrete element method for predicting the behavior of concrete under dynamic loading p. Pr9-467

F. Camborde, Y. Grillon et F. Chaigneau

DOI: https://doi.org/10.1051/jp4:2000978

The influence of internal structure on wave propagation in elastic beams under impact loading p. Pr9-475

E.I. Prockuratova et C. Gearhar

DOI: https://doi.org/10.1051/jp4:2000979

Research of shear stress in shock-loaded conditions of porous material using molecular dynamics p. Pr9-481

A.V. Kalinin et D.D. Ruder

DOI: https://doi.org/10.1051/jp4:2000980

Non-local theory of high-rate straining followed by structure formations p. Pr9-485

T.A. Khantuleva

DOI: https://doi.org/10.1051/jp4:2000981

Impact resistance of 304L type stainless steel plates: Identification of Lemaitre and Chaboche damage model's parameters at different strain rates. Comparison with experimental results p. Pr9-491

T. Yuritzinn, P. Galon, T. Grünenwald, P. Izquierdo, A. Le Maoult et M.P. Valeta

DOI: https://doi.org/10.1051/jp4:2000982

Experimental and numerical simulation of impact of thin plates with loss of contact between plates and impactor p. Pr9-497

V. Grolleau, G. Rio, H. Laurent, N. Couty et Fanch le Merdi

DOI: https://doi.org/10.1051/jp4:2000983

Localized fatigue fracture in thermo-viscoplastic flow processes under cyclic dynamic loadings p. Pr9-503

W. Dornowski et Perzyna

DOI: https://doi.org/10.1051/jp4:2000984

Numerical modelling of composite structures under impact loads p. Pr9-509

A.F. Johnson et A.K. Pickett

DOI: https://doi.org/10.1051/jp4:2000985

Numerical modeling of multi-scale shear stability loss in polycrystals under shock wave loading p. Pr9-515

R.R. Balokhonov, P.V. Makarov, V.A. Romanova, I.Yu. Smolin et I.V. Savlevich

DOI: https://doi.org/10.1051/jp4:2000986

Revisiting the L/D effect at high L/D p. Pr9-523

Y. Partom

DOI: https://doi.org/10.1051/jp4:2000987

Response of wood to the explosive loading p. Pr9-529

J. Buchar, L. Severa, M. Havlicek et S. Rolc

DOI: https://doi.org/10.1051/jp4:2000988

Steel stiffened plates subjected to a blast load p. Pr9-535

K. Cichocki et M. Ruchwa

DOI: https://doi.org/10.1051/jp4:2000989

Tool wear in high speed machining p. Pr9-541

A. Molinari et M. Nouari

DOI: https://doi.org/10.1051/jp4:2000990

Dynamic properties of golf balls p. Pr9-547

T. Kurokawa et D. Urabe

DOI: https://doi.org/10.1051/jp4:2000991

Failure of wire rope sockets under impact loading p. Pr9-553

C. Wilson et J. MacFarlane

DOI: https://doi.org/10.1051/jp4:2000992

Techniques for improving the crashworthiness of existing designs of railway rolling stock p. Pr9-559

C. Wilson et N. Kirk

DOI: https://doi.org/10.1051/jp4:2000993

Fatigue acceptable damage threshold and fatigue failure threshold according to a residual impact behaviour of an aluminium alloy p. Pr9-565

C. Froustey, T. Auzanneau, J.-L. Charles et J.-L. Lataillade

DOI: https://doi.org/10.1051/jp4:2000994

Ballistic penetration response of high strength bainitic steel p. Pr9-571

Z. Zatorski

DOI: https://doi.org/10.1051/jp4:2000995

GFRP materials under high-velocity impact loading p. Pr9-577

H.-J. Ernst, T. Wolf, K. Hoog et W.F. Unckenbold

DOI: https://doi.org/10.1051/jp4:2000996

Dynamic X-ray imaging of the penetration of boron carbide p. Pr9-583

W.A. Gooch, M.S. Burkins, G. Hauver, P. Netherwood et R. Benck

DOI: https://doi.org/10.1051/jp4:2000997

An experimental investigation of ceramic block impenetrability to high velocity long rod impact p. Pr9-589

F. Malaise, F. Collombet et J.Y. Tranchet

DOI: https://doi.org/10.1051/jp4:2000998

Peculiarities of metal balls deformation by quasi-spherical shock waves p. Pr9-595

B.L. Glushak, S.A. Novikov, L.M. Sinitsyna et N.A. Yukina

DOI: https://doi.org/10.1051/jp4:2000999

Crash gun device for many dynamic and damage behaviour analysis p. Pr9-599

J. Pasquiet, P. Matthieu, J.-J. Vanhoutte et M.L. Benzeggagh

DOI: https://doi.org/10.1051/jp4:20009100

Behaviour of Al₂O₃-Al ceramic metal composites under projectile impact p. Pr9-605

E. Strassburger, B. Lexow, O. Beffort et R. Jeanquartier

DOI: https://doi.org/10.1051/jp4:20009101

High strain rate compression and tension response of high hard tool steel p. Pr9-611

N.S. Brar et C. Hari Manoj Simha

DOI: https://doi.org/10.1051/jp4:20009102

The stability of rapidly deforming rods and jets p. Pr9-617

B.D. Goldthorpe

DOI: https://doi.org/10.1051/jp4:20009103

Crater formation dynamics in long rod (or jet) penetration p. Pr9-623

Y. Partom

DOI: https://doi.org/10.1051/jp4:20009104

A predictive numerical tool to determine the limit of perforation of EEPs p. Pr9-629

F. Rondot

DOI: https://doi.org/10.1051/jp4:20009105

Simulations of semi-infinite penetration p. Pr9-635

T.D. Andrews, B.D. Goldthorpe et P. Church

DOI: https://doi.org/10.1051/jp4:20009106

Microstructural aspects of spalling for hard metallic materials p. Pr9-641

P. Chevrier et J.R. Klepaczko

DOI: https://doi.org/10.1051/jp4:20009107

Dynamic hardness of high-strength steel and titanium alloy p. Pr9-647

G. Stepanov et V. Zubov

DOI: https://doi.org/10.1051/jp4:20009108

A numerical study on the wave propagation in tensile and perforation test p. Pr9-653

A. Rusinek et J.R. Klepaczko

DOI: https://doi.org/10.1051/jp4:20009109

Backplane response of ballistically impacted composites p. Pr9-659

J. van Hoof, M.J. Worswick et K. Williams

DOI: https://doi.org/10.1051/jp4:20009110

Characterisation and optimisation of shape memory alloys for seismic applications p. Pr9-665

D. Tirelli et S. Mascelloni

DOI: https://doi.org/10.1051/jp4:20009111

Experimental and numerical analysis of the impact behaviour of polycarbonate and polyurethane multilayer p. Pr9-671

P.E. Cros, L. Rota, C.E. Cottenot, R. Schirrer et C. Fond

DOI: https://doi.org/10.1051/jp4:20009112

Elastic response of U-Nb (6%) alloy p. Pr9-677

A.K. Zurek, R.S. Hixson, W.W. Anderson, J.E. Vorthman, G.T. Gray III et D.L. Tonks

DOI: https://doi.org/10.1051/jp4:20009113

Fragmentation of a small celestial body entering the atmosphere of a planet p. Pr9-683

A.G. Ivanov et V.A. Ryzhanskii

DOI: https://doi.org/10.1051/jp4:20009114

A numerical investigation of high velocity impact onto a ceramic block p. Pr9-689

J.Y. Tranchet, F. Collombet et F. Malaise

DOI: https://doi.org/10.1051/jp4:20009115

Dynamic tensile testing for determining the stress-strain curve at different strain rate p. Pr9-695

A. Mansilla, A. Regidor, D. Garcia et A. Negro

DOI: https://doi.org/10.1051/jp4:20009116

Constitutive modelling and mechanical properties of a nitrogen alloyed steel p. Pr9-701

P. Skoglund et S.J. Savage

DOI: https://doi.org/10.1051/jp4:20009117

Localized shear in metals under impact loading p. Pr9-707

G.V. Stepanov et V.A. Fedorchuk

DOI: https://doi.org/10.1051/jp4:20009118

Experimental and theoretical simulation of material degradation caused by atomic oxygen impact in space p. Pr9-713

T. Uchiyama, K. Satoh et T. Shioya

DOI: https://doi.org/10.1051/jp4:20009119

Analysis of boundary conditions of super deep penetration process p. Pr9-719

S. Usherenko, J. Owsik et A. Zarwalska

DOI: https://doi.org/10.1051/jp4:20009120

Quantitative damage evolution in dynamic incipiently failed Ti-6Al -4V p. Pr9-729

D.A.S. Macdougall et W.R. Thissell

DOI: https://doi.org/10.1051/jp4:20009121

Experimental approach and modeling of the compressive behaviour of two SiC grades p. Pr9-735

P. Forquin, C. Denoual, C.E. Cottenot, L. Rota et F. Hild

DOI: https://doi.org/10.1051/jp4:20009122

Ballistic development of U.S. high density tungsten carbide ceramics p. Pr9-741

W.A. Gooch, M.S. Burkins et R. Palicka

DOI: https://doi.org/10.1051/jp4:20009123

Shock induced polymorphic transition and melting of tin up to 53 GPa (experimental study and modelling) p. Pr9-749

C. Mabire et P.-L. Hereil

DOI: https://doi.org/10.1051/jp4:20009124

Influence of the shock-induced α-ε transition in Fe on its post-shock substructure evolution and mechanical behavior p. Pr9-755

G.T. Gray III, D.B. Hayes et R.S. Hixson

DOI: https://doi.org/10.1051/jp4:20009125

Structure, phase composition, and properties of an Al-Hf alloy subjected to isentropic spherical shock waves p. Pr9-761

E.A. Kozlov, D.V. Bashlykov, I.G. Brodova et E.V. Abakshin

DOI: https://doi.org/10.1051/jp4:20009126

Damage evolution and damage model validation in spalled tantalum p. Pr9-769

W.R. Thissell, A.K. Zurek, D.A.S. Macdougall et D. Tonks

DOI: https://doi.org/10.1051/jp4:20009127

Ductile damage of tantalum under spalling effects. Experimental and metallurgical analysis p. Pr9-775

F. Llorca, G. Roy et P. Antoine

DOI: https://doi.org/10.1051/jp4:20009128

Lateral stress measurements and shear strength in a shock-loaded γ- TiAl alloy p. Pr9-781

J.C.F. Millett, G.T. Gray III et N.K. Bourne

DOI: https://doi.org/10.1051/jp4:20009129

Spallation strength of single crystal and polycrystalline copper p. Pr9-787

D.L. Tonks, D.J. Alexander, S.A. Sheffield, D.L. Robbins, A.K. Zurek et W.R. Thissell

DOI: https://doi.org/10.1051/jp4:20009130

Shear strength of aluminum and copper at shockless compression p. Pr9-793

Yu.V. Bat'kov, V.N. Knyazev, S.A. Novikov, V.A. Raevski et N.D. Fishman

DOI: https://doi.org/10.1051/jp4:20009131

Temperature measurement of tin under shock compression p. Pr9-799

P.-L. Hereil et C. Mabire

DOI: https://doi.org/10.1051/jp4:20009132

Experimental examination and numerical NAG model analysis of spall sensitivity to microstructure in copper p. Pr9-805

S. Jacobi, E. Zaretsky et D. Shvarts

DOI: https://doi.org/10.1051/jp4:20009133

Failure wave as resonance excitation of collective burst modes of defects in shocked brittle materials p. Pr9-811

O.A. Plekhov, D.N. Eremeev et O.B. Naimark

DOI: https://doi.org/10.1051/jp4:20009134

Features of high-rate plastic deformation of Zr and Zr-Nb alloys under loading by spherical converging stress waves p. Pr9-817

A.V. Dobromyslov, E.A. Kozlov et N.I. Taluts

DOI: https://doi.org/10.1051/jp4:20009135

Effect of spherical converging stress waves on aluminium and quartz powder mixture p. Pr9-823

N.I. Taluts, E.A. Kozlov, A.V. Dobromyslov et Yu.N. Zhugin

DOI: https://doi.org/10.1051/jp4:20009136

Modeling of dynamic failure by nucleation and growth processes p. Pr9-829

S. Hanim et S. Ahzi

DOI: https://doi.org/10.1051/jp4:20009137

Photographic study of surface deformation during high-strain-rate torsion testing of high strength steels p. Pr9-835

N.A. Fellows et J. Harding

DOI: https://doi.org/10.1051/jp4:20009138

Le Journal de Physique IV

Volume 10 / Numéro PR9 (September 2000)

EURODYMAT 2000 - 6th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading