Journal de Physique IV (Proceedings)

Free Access

Foreword

Foreword p. V

José Cirne

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134001

• Abstract
• PDF (26.61 KB)

Structural-scaling transitions in mesodefect ensembles as mechanisms of relaxation and failure in shocked and dynamically loaded materials (experimental and theoretical study) p. 3

O.B. Naimark

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134002

• Abstract
• PDF (707.1 KB)

Models for mixed mode damage paths in shock loaded tantalum p. 9

D.L. Tonks, B.L. Henrie and C.P. Trujillo

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134003

• Abstract
• PDF (355.7 KB)

Continuum mesoscale modelling of nanocrystalline fcc metals under shock-loading using an spectral formulation fed by molecular dynamics results p. 17

R.A. Lebensohn, E.M. Bringa and A. Caro

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134004

• Abstract
• PDF (415.2 KB)

Dynamic behavior of copper under extreme loading rates p. 23

A. Zubelewicz, A.K. Zurek and M.L. Potocki

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134005

• Abstract
• PDF (119.6 KB)

Modeling of post shock mechanical behaviour of copper in hydrocode calculations p. 29

F. Llorca

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134006

• Abstract
• PDF (457.4 KB)

Dynamic response of single crystalline copper subjected to quasi-isentropic laser and gas-gun driven loading p. 37

M. Meyers, H. Jarmakani, J.M. McNaney, M. Schneider, J.H. Nguyen and B. Kad

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134007

• Abstract
• PDF (622.8 KB)

High rate constitutive modeling of aluminium alloy tube p. 43

C.P. Salisbury, M.J. Worswick and R. Mayer

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134008

• Abstract
• PDF (139.3 KB)

Influence of inertia on the formation of dislocation dipoles p. 49

L. Pillon, C. Denoual, R. Madec and Y.P. Pellegrini

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134009

• Abstract
• PDF (170.3 KB)

A practical constitutive model covering a wide range of strain rates and a large region of strain p. 55

S. Tanimura, H. Hayashi and T. Yamamoto

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134010

• Abstract
• PDF (263.1 KB)

Modelling of spalling in tantalum p. 63

C. Czarnota, S. Mercier and A. Molinari

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134011

• Abstract
• PDF (166.0 KB)

Constitutive equations for multiphase TRIP steels at high rates of strain p. 69

J. Van Slycken, P. Verleysen, J. Degrieck and J. Bouquerel

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134012

• Abstract
• PDF (922.1 KB)

Experimental investigations and modelling of strain rate and temperature effects on the flow behaviour of 1045 steel p. 75

L.W. Meyer, T. Halle, N. Herzig, L. Krüger and S.V. Razorenov

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134013

• Abstract
• PDF (143.8 KB)

Strain-rate effects on the texture evolution of low-symmetry metals: Modeling and validation using the Taylor cylinder impact test p. 81

B. Plunkett, O. Cazacu and R.A. Lebensohn

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134014

• Abstract
• PDF (230.6 KB)

A modified Johnson-Cook model for strain rates ranging from 10 to 10⁵ s p. 87

H. Couque, R. Boulanger and F. Bornet

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134015

• Abstract
• PDF (460.3 KB)

The mechanics of large-strain inhomogeneous deformation of polymeric materials under dynamic loading conditions p. 95

S. Sarva, A.D. Mulliken and M.C. Boyce

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134016

• Abstract
• PDF (522.4 KB)

Constitutive modeling of polymer materials at impact loading rates p. 103

J. Richeton, S. Ahzi, A. Makradi and K.S. Vecchio

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134017

• Abstract
• PDF (119.2 KB)

Phenomenological study of a cellular material behaviour under dynamic loadings p. 109

R. Bouix, Ph. Viot and J.-L. Lataillade

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134018

• Abstract
• PDF (1.434 MB)

Studies on impact constitutive behavior and damage evolution for PP/PA polymer blends at large deformation p. 117

Z.-J. Sun and L.-L. Wang

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134019

• Abstract
• PDF (151.3 KB)

Modelling dynamic fragmentation of rocks p. 125

S. Grange, S. Mencacci and F. Hild

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134020

• Abstract
• PDF (860.8 KB)

An analysis of the propagation of front shock in concrete p. 133

P.-L. Hereil and E. Buzaud

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134021

• Abstract
• PDF (194.6 KB)

Modelling and simulation of dynamic anisotropic degradation of structures under adiabatic shear banding p. 139

P. Longère, A. Dragon, H. Trumel and X. Deprince

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134022

• Abstract
• PDF (863.2 KB)

Improved predictive modelling of strain Localisation and ductile fracture in a Ti-6Al-4V alloy subjected to impact loading p. 147

N. Petrinic, J.L. Curiel Sosa, C.R. Siviour and B.C.F. Elliott

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134023

• Abstract
• PDF (1.970 MB)

Scalling effects on the deformation behaviour of W/Cu composite materials under dynamic loading p. 157

E. El-Magd, M. Korthäuer and S. Ataya

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134024

• Abstract
• PDF (751.8 KB)

Higher order mode-I elastodynamic stress and displacement fields of dynamic crack propagation in brittle materials p. 163

M. Watanabe

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134025

• Abstract
• PDF (265.5 KB)

Intermediate strain rate constitutive equation of 304L stainless steel from modified notched specimen torsion test p. 171

O. Lurdos, A. Aoufi, G. Damamme and F. Montheillet

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134026

• Abstract
• PDF (688.4 KB)

An anisotropic constitutive model for fiber reinforced composites using strain rate related tsai-hill criterion p. 177

Banghai Jiang and Ruoqi Zhang

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134027

• Abstract
• PDF (103.4 KB)

Strain rate dependence of dynamic flow stress considering viscous drag for 6061 aluminium alloy at high strain rates p. 183

K. Sakino

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134028

• Abstract
• PDF (761.7 KB)

A simple model for dynamic shear failure of stainless steel p. 191

O. Firstenberg, Y. Ashuach and Y. Partom

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134029

• Abstract
• PDF (648.8 KB)

Fracture modelling of a high performance armour steel p. 197

P. Skoglund, M. Nilsson and A. Tjernberg

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134030

• Abstract
• PDF (253.1 KB)

Influence of temperature, strain rate and thermal aging on the structure/property behavior of uranium 6 wt% Nb p. 203

C.M. Cady, G.T. Gray III, S.R. Chen, R.D. Field, D.R. Korzekwa, R.S. Hixson and M.F. Lopez

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134031

• Abstract
• PDF (815.7 KB)

Constitutive equation for viscoelastic media with temperature effect at high rates of loading p. 209

J.V. Suvorova, S.I. Alexeeva and I.V. Viktorova

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134032

• Abstract
• PDF (128.7 KB)

High-rate thermomechanical behavior of poly(vinyl chloride) and plasticized poly(vinyl chloride) p. 217

A.D. Mulliken, S.Y. Soong, M.C. Boyce and R.E. Cohen

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134033

• Abstract
• PDF (171.6 KB)

An investigation of balsa wood over a range of strain-rates and impact velocities p. 225

E. Palamidi and J.J. Harrigan

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134034

• Abstract
• PDF (505.6 KB)

Response of PBXs and inert substitutes in launch and impact scenarios p. 231

W. Huntington-Thresher, P.D. Church, A. Kosecki, B. Gower, P. Gould, W.G. Proud and D. Chapman

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134035

• Abstract
• PDF (789.9 KB)

Shock waves and the heterogeneity of materials p. 237

J.L. Dequiedt

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134036

• Abstract
• PDF (72.25 KB)

Determination of crash-relevant material properties of stainless steel alloy and constitutive equations p. 243

N. Peixinho

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134037

• Abstract
• PDF (945.0 KB)

Dynamic plastic necking instabilities for a biaxially pulled plate p. 251

D. Jouve

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134038

• Abstract
• PDF (87.38 KB)

Equation of state and elastic properties of beryllium from first principles calculations p. 257

G. Robert and A. Sollier

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134039

• Abstract
• PDF (693.5 KB)

Role of the $\alpha \mbox{--} \varepsilon $ transition on the damage patterns of iron p. 263

F. Buy, C. Voltz, O. Heuzé and M. Missonnier

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134040

• Abstract
• PDF (1.154 MB)

High strain rate and high temperature behaviour of metallic materials for jet engine turbine containment p. 269

F. Gálvez, D. Cendón, A. Enfedaque and V. Sánchez-Gálvez

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134041

• Abstract
• PDF (1.200 MB)

Dynamic compressibility of clay and loam p. 275

A.M. Bragov, A.K. Lomunov, I.V. Sergeichev and A.R. Filippov

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134042

• Abstract
• PDF (771.4 KB)

Constitutive modelling of dual phase steel sheet and tube p. 281

A.C. Thompson, C.P. Salisbury, M.J. Worswick and R. Mayer

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134043

• Abstract
• PDF (136.3 KB)

On the shear band spacing in stainless steel 304L p. 287

O. Oussouaddi, L. Daridon, A. Chrysochoos and S. Ahzi

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134044

• Abstract
• PDF (106.7 KB)

A physically-based and fully coupled model of elasto-plasticity and damage for dynamic failure in ductile metals p. 293

O. Oussouaddi, L. Campagne, L. Daridon and S. Ahzi

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134045

• Abstract
• PDF (96.88 KB)

Simulation of ballistic impact tests under various conditions for a nickel-base superalloy p. 299

K.N. Singh, D. Klingbeil and R. Sievert

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134046

• Abstract
• PDF (1.351 MB)

Constitutive behaviors of a silicone rubber at high strain rates p. 305

Fangyun Lu, Yuliang Lin and Li Lu

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134047

• Abstract
• PDF (197.3 KB)

The dynamic response of Copper 101 under high-rate loading p. 311

A.M. Bragov, A.K. Lomunov, A.V. Abramov, A.Yu. Konstantinov, I.V. Sergeichev, C. Braithwaite, W.G. Proud, P.D. Church, I.G. Cullis and P. Gould

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134048

• Abstract
• PDF (667.1 KB)

A numerical study on criterion of void coalescence in ductile materials at different strain rates p. 319

L.M. Yang and K. Qin

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134049

• Abstract
• PDF (543.4 KB)

Theoretical and numerical study of strain localization under high strain rate solicitation p. 325

N. Ranc, R. Raynal, L. Taravella, V. Pina and P. Hervé

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134050

• Abstract
• PDF (235.2 KB)

Damage modeling for Taylor impact simulations p. 331

C.E. Anderson Jr., I.S. Chocron and A.E. Nicholls

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134051

• Abstract
• PDF (311.3 KB)

Analysis of the response of silicon carbide subjected to shock-reshock and shock-release plate-impact experiments p. 339

T.J. Holmquist

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134052

• Abstract
• PDF (550.9 KB)

Characterisation and numerical simulation of twill and satin weaves of fabrics made of p-Aramid under static and dynamic loading p. 345

M. Boljen, W. Harwick, I. Rohr and S. Hiermaier

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134053

• Abstract
• PDF (2.107 MB)

Numerical simulation of the explosive technology of tube fixing p. 353

J. Buchar, V. Adamík and S. Rolc

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134054

• Abstract
• PDF (699.2 KB)

The response of a simple welded structure under dynamic loading conditions p. 359

I. Cullis, D. Chapman, R. Critchley, N. Penny, W. Proud, R. Kulka and M. Reynolds

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134055

• Abstract
• PDF (869.3 KB)

Nonsmooth fracture dynamics of functionally graded materials p. 367

F. Perales, Y. Monerie and A. Chrysochoos

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134056

• Abstract
• PDF (383.2 KB)

A general equation of state for polymeric materials p. 373

D. Porter and P.J. Gould

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134057

• Abstract
• PDF (98.11 KB)

Effects of liner grain size on shaped – charge jet performance: A combined experimental/numerical/analytical approach p. 379

J. Petit, V. Jeanclaude and C. Fressengeas

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134058

• Abstract
• PDF (142.9 KB)

Numerical and experimental study of the impact of small caliber projectiles on ballistic soap p. 385

N. Ndompetelo, P. Viot, G. Dyckmans and A. Chabotier

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134059

• Abstract
• PDF (223.6 KB)

Strain-rate effects for high-strain-rate computations p. 391

G.R. Johnson, T.J. Holmquist, C.E. Anderson Jr. and A.E. Nicholls

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134060

• Abstract
• PDF (308.2 KB)

More on the penetration of yawed rods p. 397

Z. Rosenberg, E. Dekel and Y. Ashuach

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134061

• Abstract
• PDF (83.86 KB)

A semi-empirical equation of penetration depth on concrete target impacted by ogive-nose projectiles p. 403

Siying Chen and Chenguang Huang

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134062

• Abstract
• PDF (269.7 KB)

Composite blade damaging under impact p. 409

T. Menouillard, J. Réthoré, H. Bung and A. Suffis

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134063

• Abstract
• PDF (1.020 MB)

Numerical modelling of orthogonal cutting: Influence of cutting conditions and separation criterion p. 417

H. Miguélez, R. Zaera, A. Rusinek, A. Moufki and A. Molinari

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134064

• Abstract
• PDF (472.3 KB)

Use of 3D simulations to investigate the effect of grooves on the surface of a plate impact experiment p. 423

P.D. Church, R. Townsley, D. Fishpool and W.G. Proud

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134065

• Abstract
• PDF (626.3 KB)

Simulations of necking during plane strain tensile tests p. 429

F. Dalle

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134066

• Abstract
• PDF (1.226 MB)

Finite element simulations of the Portevin–Le Chatelier effect in aluminium alloy p. 435

O.S. Hopperstad, T. Børvik, T. Berstad and A. Benallal

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134067

• Abstract
• PDF (499.0 KB)

Application of Goldthorpe PDF model to dynamic fracture. Applications using the GRIM Eulerian hydrocode p. 443

I.G. Cullis, P.D. Church, R. Townsley, P. Greenwood and W.G. Proud

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134068

• Abstract
• PDF (347.4 KB)

A 3D modelling of the protrusion and retraction of a single cell during the motiliy and the rolling p. 449

N. Mefti, B. Haussy and J.F. Ganghoffer

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134069

• Abstract
• PDF (1.114 MB)

Influence of the mechanical damping on the rolling of a single biological cell: A stochastic approach p. 453

N. Mefti, B. Haussy and J.F. Ganghoffer

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134070

• Abstract
• PDF (1.453 MB)

On the use of combined finite/discrete element method for impacted concrete structures p. 461

E. Frangin, P. Marin and L. Daudeville

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134071

• Abstract
• PDF (814.5 KB)

A study of combined particle and blast wave loading of structures p. 467

I.D. Elgy, D.J. Pope and I.M. Pickup

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134072

• Abstract
• PDF (99.32 KB)

Pulse mitigation by a composite discrete medium p. 473

C. Daraio, V.F. Nesterenko, E.B. Herbold and S. Jin

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134073

• Abstract
• PDF (456.6 KB)

A damage model for orthotropic metals p. 481

J.C. Campbell, R. Vignjevic and J. Mirkovic

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134074

• Abstract
• PDF (400.4 KB)

Experimental and numerical analysis of high strain rate behavior of aluminum alloys AMg-6 and D-16 p. 487

A.V. Abramov, A.M. Bragov, A.K. Lomunov, A.Yu. Konstantinov, L. Kruszka and I.V. Sergeichev

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134075

• Abstract
• PDF (130.0 KB)

Effect of impact velocity on circular tubes subjected to axial loading p. 493

D.-H. Chen, K. Masuda, M. Takano and K. Ushijima

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134076

• Abstract
• PDF (618.9 KB)

Adaptive numerical modeling of dynamic crack propagation p. 501

H. Adouani, B. Tie, C. Berdin and D. Aubry

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134077

• Abstract
• PDF (155.6 KB)

Elastic wave propagation in hexagonal honeycomb sandwich panels: Physical understanding and numerical modeling p. 507

A. Grédé, B. Tie and D. Aubry

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134078

• Abstract
• PDF (1.507 MB)

An efficient implicit approach for the thermomechanical behavior of materials submitted to high strain rates p. 515

P.P. Jeunechamps and J.P. Ponthot

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134079

• Abstract
• PDF (469.6 KB)

A numerical investigation of dispersion in Hopkinson Pressure Bar experiments p. 521

R.A. Govender, T.J. Cloete and G.N. Nurick

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134080

• Abstract
• PDF (103.8 KB)

Laser driven quasi-isentropic compression experiments (ICE) for dynamically loading materials at high strain rates p. 529

R.F. Smith, J.H. Eggert, P. Celliers, A. Jankowski, T. Lorenz, S. Moon, M.J. Edwards and G. Collins

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134081

• Abstract
• PDF (570.8 KB)

Dynamic material characterization under ramp wave compression with GEPI device p. 535

P.-L. Héreil and G. Avrillaud

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134082

• Abstract
• PDF (718.0 KB)

Experimental and numerical study of the response of steel sheet Hopkinson specimens p. 541

P. Verleysen and J. Degrieck

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134083

• Abstract
• PDF (404.0 KB)

Split Hopkinson bar testing to study failure waves in brittle materials p. 547

L.H.L. Louro and A.L.V. Cardoso

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134084

• Abstract
• PDF (563.0 KB)

Hydraulic machine tests for compression of a quasi-brittle material at medium strain rate p. 553

Y. Quirion and A.S. Lesaffre

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134085

• Abstract
• PDF (1.228 MB)

Experimental investigation of dynamic friction at high contact pressure applied to an aluminium/stainless steel tribo pair p. 559

A. Juanicotena

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134086

• Abstract
• PDF (425.2 KB)

Apache Leap tuff rock: High strain rate characterization and support simulations p. 565

S. Chocron, K.A. Dannemann, A. Nicholls and J.D. Walker

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134087

• Abstract
• PDF (1.352 MB)

Wave separation in non-uniform Hopkinson bars using redundant measurements p. 571

R. Othman

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134088

• Abstract
• PDF (511.7 KB)

Real-time measurement on deformation fields of hole-excavated samples under impact tension p. 577

Siying Chen, Chenguang Huang and Guoqiang Ni

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134089

• Abstract
• PDF (1.003 MB)

On standardization of the plate impact experiment for polymeric and metallic materials p. 583

Y. Sato and K. Nishimura

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134090

• Abstract
• PDF (435.1 KB)

A microstructural investigation of “machining rings” and deformation uniformity for dynamic ring compression tests p. 591

T.J. Cloete, R.S. Hartley and G.N. Nurick

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134091

• Abstract
• PDF (1.145 MB)

Dynamic optical interferometry applied to analyse out of plane displacement fields for crack propagation in brittle materials p. 597

S. Hedan, O. Pop, V. Valle and M. Cottron

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134092

• Abstract
• PDF (475.2 KB)

High-temperature tests on aluminium in a split-Hopkinson bar – experimental set-up and numerical predictions p. 603

A.H. Clausen, T. Auestad, T. Berstad, T. Børvik and M. Langseth

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134093

• Abstract
• PDF (860.3 KB)

High strain-rate compression test on metallic foam using a multiple pulse SHPB Apparatus p. 609

M. Peroni, L. Peroni and M. Avalle

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134094

• Abstract
• PDF (1.423 MB)

High strain rate tensile testing using a split Hopkinson pressure bar apparatus p. 617

D. Mohr and G. Gary

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134095

• Abstract
• PDF (285.1 KB)

Use of flash X-radiography to observe ejecta from shaped charge penetrators in concrete p. 623

P. Church, B. Stewart, J. Macmahon, M. Rhodes, W.G. Proud, D. Williamson and C. Lloyd

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134096

• Abstract
• PDF (201.8 KB)

An experimental method of measuring the confined compression strength of high-performance concretes to analyse their ballistic behaviour p. 629

P. Forquin, A. Árias and R. Zaera

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134097

• Abstract
• PDF (1.871 MB)

A new experimental technique for the analysis of concrete under high triaxial loading p. 635

T. Gabet, X.H. Vu, Y. Malecot and L. Daudeville

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134098

• Abstract
• PDF (451.7 KB)

The industrial application of dynamic testing for the study of metallic strength and toughness properties p. 641

J. Fang

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134099

• Abstract
• PDF (365.6 KB)

Analysis of the concrete behaviour in tension at high strain-rate by a modified Hopkinson bar in support of impact resistant structural design p. 647

E. Cadoni, C. Albertini and G. Solomos

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134100

• Abstract
• PDF (1.227 MB)

Large strain dynamic compression for soft materials using a direct impact experiment p. 653

T. Meenken and S. Hiermaier

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134101

• Abstract
• PDF (632.4 KB)

A study of material constitutive behaviour at elevated temperature from compressive SHPB test using an inverse analysis method p. 661

A. Gavrus, B. Davoodi and E. Ragneau

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134102

• Abstract
• PDF (920.7 KB)

Calculating the effect of configuration on the response of manganin stress gauges p. 667

R.E. Winter and E.J. Harris

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134103

• Abstract
• PDF (335.1 KB)

Non-direct tensile loading of sheet specimens on a classical split Hopkinson bars apparatus p. 673

G. Haugou, E. Markiewicz and J. Fabis

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134104

• Abstract
• PDF (799.7 KB)

Dynamic fracture of ceramics p. 681

J. Buchar and S. Rolc

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134105

• Abstract
• PDF (378.6 KB)

Full field strain measurement during a tensile split Hopkinson bar experiment p. 687

A. Gilat, T. Schmidt and J. Tyson

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134106

• Abstract
• PDF (1.489 MB)

Dynamic impact testing with servohydraulic testing machines p. 693

R. Bardenheier and G. Rogers

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134107

• Abstract
• PDF (1.134 MB)

A new Hopkinson bar method to investigate the compacting behaviour of fresh concrete p. 701

S. Pattofatto, H. Zhao and A. Poitou

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134108

• Abstract
• PDF (456.2 KB)

Dynamic compressive testing under confining pressure on a quasi-brittle material p. 707

I. Masson, P. Guegan, A.S. Lesaffre, Y. Quirion and A. Poitou

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134109

• Abstract
• PDF (1.057 MB)

A new impact test for the identification of a dynamic crack propagation criterion using a gas-gun device p. 713

I. Nistor, O. Pantalé and S. Caperaa

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134110

• Abstract
• PDF (733.8 KB)

The shock induced equation of state and shear strength of polyvinylidene difluoride p. 719

J.C.F. Millett and N.K. Bourne

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134111

• Abstract
• PDF (212.4 KB)

Modified split Hopkinson pressure bars for dynamic bending and shear tests p. 725

A. Pignon, G. Mathieu, S. Richomme, J.M. Margot and F. Delvare

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134112

• Abstract
• PDF (1.295 MB)

BAGHEERA: A new experimental facility at CEA / Valduc for actinides studies under high dynamic loading p. 731

G. Roy, F. Llorca, G. Lanier, S. Lamalle, J. Beaulieu, P. Antoine and P. Martinuzzi

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134113

• Abstract
• PDF (1.081 MB)

Evolutions of the LASer Adhesion Test (LASAT) for the debonding of coatings on substrates above the millimeter range thickness p. 739

M. Arrigoni, M. Boustie, C. Bolis, L. Berthe, S. Barradas and M. Jeandin

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134114

• Abstract
• PDF (463.4 KB)

Characteristics analysis of Isentropic Compression Experiments (ICE) p. 745

S.D. Rothman and J. Maw

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134115

• Abstract
• PDF (161.9 KB)

Response of split Hopkinson pressure bars to end-surface damage p. 751

M. Bolduc and R. Arsenault

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134116

• Abstract
• PDF (1.878 MB)

Development of an original device to study high speed interactions p. 757

M. Ben Zeineb, S. Philippon, P. Viéville, G. Sutter and P. Lipinski

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134117

• Abstract
• PDF (789.3 KB)

Cylindrical implosion from explosive: Experiment of validation of the constitutive equations– Experimental approach p. 763

E. Martinez and J.M. Servas

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134118

• Abstract
• PDF (878.7 KB)

Validation of a multitechnical device aimed to reach the temperature of a material under shock loading p. 769

B. Legrand, E. Blanco and E. Martinez

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134119

• Abstract
• PDF (457.7 KB)

Study and improvement of a high speed hydraulic jack p. 775

M.S. Garcia, M. Nouillant and P. Viot

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134120

• Abstract
• PDF (1.034 MB)

Using a shock tube to predict the response of polymeric foam to a blast loading p. 783

S. Ouellet, D. Frost and A. Bouamoul

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134121

• Abstract
• PDF (836.5 KB)

Determination of impact tensile properties of structural epoxy adhesive butt joints using a hat-shaped specimen p. 789

T. Yokoyama and K. Nakai

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134122

• Abstract
• PDF (675.4 KB)

Evaluation of interlaminar shear strength of a unidirectional carbon/epoxy laminated composite under impact loading p. 797

T. Yokoyama and K. Nakai

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134123

• Abstract
• PDF (1.804 MB)

Photonic doppler velocimetry in shock physics experiments p. 805

P. Mercier, J. Benier, A. Azzolina, J.M. Lagrange and D. Partouche

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134124

• Abstract
• PDF (969.5 KB)

A modified split Hopkinson pressure bar for toughness tests p. 813

N. Granier and T. Grunenwald

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134125

• Abstract
• PDF (545.8 KB)

Quasi-static and impact tests of honeycomb p. 819

G. Gary and J.R. Klepaczko

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134126

• Abstract
• PDF (594.5 KB)

Determination of the dynamic stress intensity factor of a specimen under one-point bending from the measurement of the load-point displacement p. 827

J.A. Loya, I. Villa, J. Fernández-Sáez and C. Navarro

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134127

• Abstract
• PDF (622.7 KB)

Some experiments on adiabatic shear failure p. 835

D. Rittel, Z.G. Wang and M. Merzer

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134128

• Abstract
• PDF (81.55 KB)

Characterization of the behavior under impact loading of a maraging steel strengthened by nano-precipitates p. 839

E. Lach, A. Redjaïmia, H. Leitner and H. Clemens

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134129

• Abstract
• PDF (1.152 MB)

Deformation mechanisms of a commercial titanium alloy Ti6Al4V as a function of strain rate and initial texture p. 845

F. Coghe, L. Rabet and L. Kestens

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134130

• Abstract
• PDF (1.329 MB)

The effect of aspect ratio on the compressive high rate deformation of three metallic alloys p. 851

S.M. Walley, D.D. Radford and D.J. Chapman

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134131

• Abstract
• PDF (2.400 MB)

Dynamic instabilities and failures in impact tension, compression and shear p. 857

J.R. Klepaczko

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134132

• Abstract
• PDF (157.8 KB)

Liquid spall in laser shock-loaded Tin melted on compression or on release p. 869

T. de Rességuier, L. Signor, A. Dragon, M. Boustie, G. Roy and F. Llorca

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134133

• Abstract
• PDF (1.388 MB)

Non localization of nucleation during Lead-Calcium alloy spall under Taylor's wave solicitation: Comparison between metallographic observations and numerical simulations p. 877

C. Bolis and C. Voltz

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134134

• Abstract
• PDF (782.3 KB)

Energy dissipation across the front of shock wave in rheological materials filled with second phase inclusions p. 883

Jian-kang Chen and Jue Zhu

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134135

• Abstract
• PDF (93.51 KB)

Influence of spherical converging shock waves on high-rate plastic deformation of a copper single crystal p. 889

A.V. Dobromyslov, N.I. Taluts, E.A. Kozlov and K.A. Schetkov

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134136

• Abstract
• PDF (3.921 MB)

On material phase transformations under high pressures in static and shock-wave experiments p. 895

B.A. Nadykto

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134137

• Abstract
• PDF (134.9 KB)

Effects of microstructural heterogeneity on the spallation behavior of materials p. 903

Haiying Wang, Yong Liu, Mengfen Xia, Fujiu Ke and Yilong Bai

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134138

• Abstract
• PDF (113.8 KB)

Influence of energetic-driven “Taylor-Wave” shock-wave prestraining on the structure/property response of depleted uranium p. 909

G.T. (Rusty) Gray III, C.M. Cady, R.J. McCabe, R.S. Hixson, D.R. Korzekwa and M.F. Lopez

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134139

• Abstract
• PDF (3.199 MB)

Deformation of nanocrystalline materials at ultrahigh strain rates – microstructure perspective in nanocrystalline nickel p. 915

Y.M. Wang, E.M. Bringa, M. Victoria, A. Caro, J.M. McNaney, R. Smith and B.A. Remington

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134140

• Abstract
• PDF (1.671 MB)

Perforation of aluminium foam core sandwich panels under impact loading p. 921

I. Elnasri, H. Zhao and Y. Girard

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134141

• Abstract
• PDF (1.665 MB)

Investigation of fused silica dynamic behaviour p. 929

F. Malaise, J.-M. Chevalier, I. Bertron and F. Malka

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134142

• Abstract
• PDF (191.7 KB)

The influence of temperature and strain rate on the tensile and compressive constitutive response of four fluoropolymers p. 935

E.N. Brown, P.J. Rae and G.T. Gray

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134143

• Abstract
• PDF (216.7 KB)

Behavior of polycarbonate armor: Influence of gamma irradiation p. 941

R.P. Weber and J.C. Miguez Suarez

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134144

• Abstract
• PDF (486.6 KB)

Mechanical behaviour of polymers at high rates of strain p. 949

C.R. Siviour, S.M. Walley, W.G. Proud and J.E. Field

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134145

• Abstract
• PDF (1.353 MB)

Microcracks propagation in one Al/SiC under impact loading p. 957

Zhong Ling and Leitian Shen

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134146

• Abstract
• PDF (789.1 KB)

Dynamic deformation and failure behaviour of Al-Sc alloy under shear loading p. 965

W.S. Lee, C.F. Lin and Y.C. Lin

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134147

• Abstract
• PDF (704.6 KB)

Dynamic strength of uranium at high temperatures p. 971

E. Zaretsky, B. Herrmann and D. Shvarts

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134148

• Abstract
• PDF (555.3 KB)

Shock-wave initiation of nuclear transmutation of chemical elements p. 977

V.V. Sobolev and S.M. Usherenko

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134149

• Abstract
• PDF (1.567 MB)

Dynamic yield and tensile strength of LY12 aluminum alloy at elevated temperatures p. 983

Yonggang Wang, Hongliang He, Denping Chen, Lili Wang and Fuqian Jing

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134150

• Abstract
• PDF (134.3 KB)

Rate dependence of domain switching in PZT under static and dynamic compressive loading p. 989

Xin-long Dong, Guang-yu Zhou, Zhen-lin Qi and Li-li Wang

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134151

• Abstract
• PDF (139.1 KB)

Dynamic strength of cylindrical fiber-glass shells and basalt plastic shells under multiple explosive loading p. 995

M.A. Syrunin and A.G. Fedorenko

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134152

• Abstract
• PDF (286.7 KB)

Influence of spherical converging shock waves on the structure of Al–2.4% Mg–5.5% Zn alloy p. 1003

A.V. Dobromyslov, N.I. Taluts, E.A. Kozlov and A.N. Uksusnikov

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134153

• Abstract
• PDF (3.837 MB)

Ballistic behavior of alumina with niobia additions p. 1009

A.V. Gomes, L.H.L. Louro and C.R.C. Costa

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134154

• Abstract
• PDF (194.4 KB)

Experimental and theoretical study of universality of plastic wave fronts and structural scaling in shock loaded copper p. 1015

Yu. Bayandin, V. Leont'ev, O. Naimark and S. Permjakov

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134155

• Abstract
• PDF (253.5 KB)

Stress relaxation of elastic precursor for unalloyed uranium and some uranium-based alloys p. 1023

E.A. Kozlov, V.I. Tarzhanov, I.V. Telichko, D.M. Gorbachev and D.G. Pankratov

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134156

• Abstract
• PDF (443.2 KB)

The influence of shock prestraining on the structure/property response of hafnium p. 1029

E. Cerreta, G.T. Gray III and C.P. Trujillo

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134157

• Abstract
• PDF (726.7 KB)

Viscoplastic behavior of pure shocked iron p. 1035

C. Voltz and F. Buy

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134158

• Abstract
• PDF (552.4 KB)

Dynamic properties and microstructural behavior of pure iron below and above shock induced phase transition p. 1041

C. Voltz and F. Buy

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134159

• Abstract
• PDF (1.952 MB)

Dynamic materials behavior of a porous pressureless sintered steel and a HIPped steel p. 1047

H. Nahme, E. Lach and R. Rohr

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134160

• Abstract
• PDF (704.8 KB)

A preliminary study on the perforation resistance of high-strength steel plates p. 1053

T. Børvik, S. Dey and A.H. Clausen

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134161

• Abstract
• PDF (541.3 KB)

Feature in accumulation of microdefects in copper under shock-wave loading p. 1061

A.V. Pavlenko, A.E. Shestakov, A.R. Nurgaleev and D.N. Kazakov

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134162

• Abstract
• PDF (492.8 KB)

Shock wave effects during a Taylor test p. 1065

E. Lach and M. Scharf

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134163

• Abstract
• PDF (644.1 KB)

Tensile properties in the through-thickness direction for a carbon fiber woven reinforced compositeat impact loading rate p. 1071

Banghai Jiang and Ruoqi Zhang

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134164

• Abstract
• PDF (597.0 KB)

Meshless modelling of dynamic behaviour of glasses under intense shock loadings: Application to matter ejection during high velocity impacts on thin brittle targets p. 1077

Y. Michel, J.-M. Chevalier, C. Durin, C. Espinosa, F. Malaise and J.-J. Barrau

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134165

• Abstract
• PDF (1.006 MB)

Influence of uniaxial, biaxial and plane strain pre-straining on the dynamic tensile properties of high strength sheet steels p. 1085

P. Larour, P. Verleysen and W. Bleck

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134166

• Abstract
• PDF (170.0 KB)

Effect of heat treatment conditions on the dynamic strength and failure behavior of titanium alloy Ti-6Al-4V p. 1091

L. Krüger, K. Sommer, T. Halle, M. Hockauf and L.W. Meyer

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134167

• Abstract
• PDF (1.711 MB)

Microstructural evolution in high strength materials at high strain rates p. 1097

M.N. Bassim, M. Bolduc, A.G. Odeshi and S. Mirfarkraei

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134168

• Abstract
• PDF (591.6 KB)

Effect of strain rate on the interlaminar fracture toughness of Zanchor reinforced composites p. 1105

T. Kusaka, M. Hojo, T. Fukuoka and M. Ishibashi

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134169

• Abstract
• PDF (351.2 KB)

Investigation of the behaviour of steel and laminated fabric plates under blast load and fragment impact p. 1113

W.A. Trzciński and S. Cudziło

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134170

• Abstract
• PDF (924.7 KB)

Behavior of cementitious materials for high-strain rate conditions p. 1119

M.J. Schmidt and O. Cazacu

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134171

• Abstract
• PDF (1.382 MB)

On the behaviour and microstructural evolution of a TiAl alloy under quasistatic and dynamic compression p. 1125

S. Amelio, A. Redjaïmia, E. Lach and A. Lichtenberger

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134172

• Abstract
• PDF (1.756 MB)

Diagnostics of ballistic resistance of constructional shields and experimental verification p. 1131

Z. Zatorski

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134173

• Abstract
• PDF (74.27 KB)

Microstructural evolution and grain refinement in HCP-Zr shear bands p. 1137

B.K. Kad, M. Gebert, M.E. Kassner and M.A. Meyers

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134174

• Abstract
• PDF (3.242 MB)

Fracture behaviour of High Performance Concrete (HPC) investigated with a Hopkinson-Bar p. 1145

H. Schuler and H. Hansson

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134175

• Abstract
• PDF (1.768 MB)

The influence of strain rate on the interfacial fracture toughness between PVB and laminated glass p. 1153

R. Iwasaki and C. Sato

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134176

• Abstract
• PDF (970.2 KB)

Experimental approach to shock synthesis using pressure-temperature-strain data p. 1161

K.P. Staudhammer

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134177

• Abstract
• PDF (1.019 MB)

Characterising performance of automotive materials at high strain rate for improved crash design p. 1167

P.K.C. Wood, C.A. Schley, I. McGregor, T. Dutton, M. Bloomfield and R. Bardenheier

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134178

• Abstract
• PDF (861.2 KB)

Effects of strain-rate and pre-fatigue on tensile properties of laser welded joint of high strength steel plates p. 1175

H. Kobayashi, M. Daimaruya, H. Tsuda and K. Horikawa

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134179

• Abstract
• PDF (1.855 MB)

Study of parameters affecting the strength of yarns p. 1183

B. Farsi Dooraki, J.A. Nemes and M. Bolduc

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134180

• Abstract
• PDF (425.0 KB)

High-speed blanking of copper alloy sheets: Material modeling and simulation p. 1189

Ch. Husson, S. Ahzi and L. Daridon

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134181

• Abstract
• PDF (194.8 KB)

A new approach of high speed cutting modelling: SPH method p. 1195

J. Limido, C. Espinosa, M. Salaun and J.L. Lacome

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134182

• Abstract
• PDF (1.268 MB)

Impact of a diamond coating on tool wear behaviour during dry machining of a multidirectional composite materials p. 1201

D. Iliescu, D. Géhin, M. Nouari and F. Girot

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134183

• Abstract
• PDF (966.2 KB)

Dynamic crushing behaviour of aluminium tubes filled with cork p. 1207

C.P. Gameiro, J. Cirne and G. Gary

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134184

• Abstract
• PDF (656.9 KB)

Fracture simulation of elastomer blended polypropylene based on elastoviscoplastic constitutive equation with craze and tensile softening law p. 1215

H. Mae

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134185

• Abstract
• PDF (2.511 MB)

Development of low cost composite plates for humanitarian demining operations p. 1225

L. Rabet, J. Scheppers, I. Verpoest, M. Pirlot, B. Desmet, L. Gilson and P. Pirard

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134186

• Abstract
• PDF (876.0 KB)

The effect of strain rate on the die-drawing of polyoxymethylene at elevated temperatures p. 1231

J. Mohanraj, D.C. Barton, C. G'Sell and I.M. Ward

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134187

• Abstract
• PDF (895.2 KB)

Explosive welding of pipes p. 1239

O. Drennov, O. Burtseva and A. Kitin

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134188

• Abstract
• PDF (552.3 KB)

On deformation of beryllium under high-velocity oblique collision p. 1245

O. Drennov and A. Mikhailov

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134189

• Abstract
• PDF (258.5 KB)

Dynamic compaction of particulate composite materials p. 1251

V.A. Popov, K.P. Staudhammer and V.N. Goulbin

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134190

• Abstract
• PDF (3.525 MB)

Response of pre-loaded laminate composite plates subject to high velocity impact p. 1257

S.K. García-Castillo, S. Sánchez-Sáez, E. Barbero and C. Navarro

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134191

• Abstract
• PDF (367.5 KB)

Damage modes of straight tungsten carbide in dry machining of titanium alloy TA6V p. 1265

M. Calamaz, M. Nouari, D. Géhin and F. Girot

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134192

• Abstract
• PDF (579.3 KB)

Experimental observations about the influence of the cutting conditions in high speed machining of Ti-6Al-4V Titanium alloy p. 1273

L. Castro, P. Viéville and P. Lipinski

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134193

• Abstract
• PDF (1.237 MB)

Mechanical behaviour and temperature measurement during dynamic deformation on split Hopkinson bar of 304L stainless steel and 5754 aluminium alloy p. 1279

C. Jovic, D. Wagner, P. Herve, G. Gary and L. Lazzarotto

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134194

• Abstract
• PDF (474.1 KB)

Influence of the strain path on crash properties of a crash-box structure by experimental and numerical approaches p. 1287

L. Durrenberger, D. Even, A. Molinari and A. Rusinek

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134195

• Abstract
• PDF (771.9 KB)

Perforation analysis of reinforced concrete plates under soft impact p. 1295

P. Koechlin, S. Andrieux, A. Millard and S. Potapov

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134196

• Abstract
• PDF (450.2 KB)

Characterization of strain rate and temperature dependent mechanical behavior of TWIP steels p. 1301

M. Hokka, V.-T. Kuokkala, S. Curtze, T. Vuoristo and M. Apostol

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134197

• Abstract
• PDF (1.335 MB)

High strain rate properties of fatigued advanced high strength steel sheets p. 1307

P. Verleysen, P. Vanduynslager, J. Van Slycken, M. Vermeulen and J. Degrieck

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134198

• Abstract
• PDF (282.7 KB)

Microstructure of surface zones subjected to high-velocity parting-off p. 1313

K. Ryttberg, M. Knutson Wedel, P. Dahlman and L. Nyborg

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134199

• Abstract
• PDF (3.319 MB)

Mechanical behavior of composite based polypropylene: Recycling and strain rate effects p. 1319

N. Bahlouli, D. Pessey, S. Ahzi and Y. Rémond

Published online: 26 July 2006

DOI: https://doi.org/10.1051/jp4:2006134200

• Abstract
• PDF (4.204 MB)