Journal de Physique IV

Nanostructured recycled hardmetals p. Pr4-3

F. Arcuri, R. Ricceri and P. Matteazzi

DOI: https://doi.org/10.1051/jp4:2001401

Processing and characterisation of nanocrystalline iron aluminide coatings prepared by thermal spraying of milled powders p. Pr4-11

T. Grosdidier, H. L. Liao, S. Lenhard, A. Tidu and S. Revol

DOI: https://doi.org/10.1051/jp4:2001402

Investigation of mechanical properties in cryomilled dispersion strengthened aluminium p. Pr4-19

A. Soreng, J.I. Moe and E. Hellum

DOI: https://doi.org/10.1051/jp4:2001403

Microstructure evolutions in pearlitic steels and Cu/Nb wires resulting from severe plastic deformation during drawing p. Pr4-27

X. Sauvage, L. Thilly and D. Blavette

DOI: https://doi.org/10.1051/jp4:2001404

Optimization of high strength materials : Design of the engineering parameters through the nanostructure characterization p. Pr4-33

L. Thilly, F. Lecouturier, M. Véron, E. Snoeck, J.P. Peyrade and S. Askénazy

DOI: https://doi.org/10.1051/jp4:2001405

Influence of the heat treatment of the melt on the structure and mechanical behaviour of metallic glass ribbons p. Pr4-41

M. Calvo-Dahlborg, J.M. Ruppert, E.D. Tabachnikova, V.Z. Bengus, U. Dahlborg, F. Häussler, V.E. Sidorov and P.S. Popel

DOI: https://doi.org/10.1051/jp4:2001406

Porous titanium obtained by P/M p. Pr4-51

R. Ricceri, F. Arcuri and P. Matteazzi

DOI: https://doi.org/10.1051/jp4:2001407

Texture and crystallite microstrain development during tensile deformation of copper - simulation and comparison to experimental results p. Pr4-61

S. Aris, R.V. Martins, J. Wegener, V. Honkimäki and A. Pyzalla

DOI: https://doi.org/10.1051/jp4:2001408

Recrystallization kinetics and associated textures of Cu-bearing Ti-IF steels p. Pr4-69

S. Diligent-Berveiller, E. Aeby-Gautier, P. Weisbecker, M.H. Mathon, T. Iung, H. Réglé and P. Zimmer

DOI: https://doi.org/10.1051/jp4:2001409

Effect of solutes on the dynamic recrystallization microstructure of nickel p. Pr4-77

R. Le Gall, P. Bocher, B. Verlinden and J.J. Jonas

DOI: https://doi.org/10.1051/jp4:2001410

Final textures in cold rolled Zr702α polycrystalline samples p. Pr4-83

H. Francillette, B. Bacroix, R .A. Lebensohn and J.L. Béchade

DOI: https://doi.org/10.1051/jp4:2001411

Effect of cold rolling on the transition texture of commercially pure titanium p. Pr4-91

N. Gey, M. Humbert and A.K. Singh

DOI: https://doi.org/10.1051/jp4:2001412

Influence of hydrostatic recrystallization on the microstructure and mechanical properties of ultra-high molecular weight polyethylene p. Pr4-99

C. G'Sell, B. Lagathu, C. Cunat, J. von Stebut and D. Mainard

DOI: https://doi.org/10.1051/jp4:2001413

Mechanical behaviour and microstructural evolution of a microalloyed C-Mn steel during hot forming process p. Pr4-107

P. Thibaux, D. Jouaffre, D. Feuillu, Y. Chastel and A.-M. Chaze

DOI: https://doi.org/10.1051/jp4:2001414

Incorporation of microstructure and texture models into FEM p. Pr4-115

H. Aretz, R. Luce, M. Wolske, R. Kopp, M. Gördeler, G. Pomana and G. Gottstein

DOI: https://doi.org/10.1051/jp4:2001415

Modelling of full-scale industrial rolling and recrystallisation of strips of alloy 3103 p. Pr4-123

H.E. Vatne, F. Perocheau, H.-E. Ekström, L. Poizat, E. Nes, J. Hagström, M. Lyttle and T. Furu

DOI: https://doi.org/10.1051/jp4:2001416

Extrusion of different aluminium alloys ; experimental work and modelling treatments p. Pr4-131

T. Furu, D.H. Bratland, H.E. Vatne, S. Abtahi, B. Bengtsson and J. Hou

DOI: https://doi.org/10.1051/jp4:2001417

Formation of martensite - austenite constituents in the intercritically reheated HAZ of a HSLA steel p. Pr4-141

A. Lambert, P. Maugis, A.F. Gourgues, T. Sturel and A. Pineau

DOI: https://doi.org/10.1051/jp4:2001418

Diffusional phase transformations in steel - theory and application to continuous casting p. Pr4-149

E. Gamsjäger, C.M. Chimani, F.D. Fischer and J. Svoboda

DOI: https://doi.org/10.1051/jp4:2001419

Microstructure and residual stresses issued from the bonding of an austenitic onto a ferritic steel by solid diffusion p. Pr4-157

H. Burlet, M. Martinez and G. Cailletaud

DOI: https://doi.org/10.1051/jp4:2001420

Transformation plasticity in titanium alpha double prime martensite p. Pr4-165

O.M. Ivasishin and R.V. Teliovich

DOI: https://doi.org/10.1051/jp4:2001421

Transformation induced plasticity in martensitic transformation of ferrous alloys p. Pr4-173

S. Grostabussiat, L. Taleb, J.F. Jullien and F. Sidoroff

DOI: https://doi.org/10.1051/jp4:2001422

Bainitic transformation under stress in medium alloyed steels p. Pr4-181

M. Veaux, J.C. Louin, J.P. Houin, S. Denis, P. Archambault and E. Aeby-Gautier

DOI: https://doi.org/10.1051/jp4:2001423

Study of the martensitic transformation on a Cr-Ni-Mo-Al-Ti steel for different thermomechanical paths p. Pr4-189

F. Azzouz, G. Cailletaud, F.D. Fischer, A. Pineau and K. Tanaka

DOI: https://doi.org/10.1051/jp4:2001424

Adaptive composites with embedded shape memory alloys p. Pr4-197

M. Parlinska, H. Clech, J.A. Balta, V. Michaud, J.-E. Bidaux, J.-A.E. Manson and R. Gotthardt

DOI: https://doi.org/10.1051/jp4:2001425

CuZnAl single crystals pseudoelastic behaviour under biaxial tensile loading: Observations and analysis p. Pr4-205

A. Vivet and C. Lexcellent

DOI: https://doi.org/10.1051/jp4:2001426

Microstructural modifications and material response in machining of steels p. Pr4-213

B. Changeux and J.-L. Lebrun

DOI: https://doi.org/10.1051/jp4:2001427

Physical modelling of microstructure and mechanical properties of dual-phase steel p. Pr4-223

O. Bouaziz, T. lung, M. Kandel and C. Lecomte

DOI: https://doi.org/10.1051/jp4:2001428

High strength microstructural forms developed in titanium alloys by rapid heat treatment p. Pr4-233

O.M. Ivasishin

DOI: https://doi.org/10.1051/jp4:2001429

A low cost metastable beta titanium alloy: Thermal treatments, microstructures and mechanical properties p. Pr4-241

F. Prima, P. Vermaut, I. Thibon, J. Debuigne and D. Ansel

DOI: https://doi.org/10.1051/jp4:2001430

Experimental and numerical analysis of the effects of process parameters on the properties of components in metal injection molding p. Pr4-249

Th. Barriere, D. Renault and J.C. Gelin

DOI: https://doi.org/10.1051/jp4:2001431

A generalised sliding wear model for inhomogeneous coatings p. Pr4-257

W. Yan, E.P. Busso and N.P. O'Dowd

DOI: https://doi.org/10.1051/jp4:2001432

Localization of deformation in polycrystalline ice p. Pr4-267

P. Mansuy, A. Philip and J. Meyssonnier

DOI: https://doi.org/10.1051/jp4:2001433

Mechanical behaviour of a semicrystalline polymer before necking p. Pr4-275

N. Brusselle-Dupend, D. Lai, X. Feaugas, M. Guigon and M. Clavel

DOI: https://doi.org/10.1051/jp4:2001434

Stacking fault energy (s.f.e.) and grain size effects (d) on the tensile behaviour of f.c.c. polycrystalline alloys at 300 K: Back stress and effective stress evolutions p. Pr4-283

H. Haddou, C. Gaudin and X. Feaugas

DOI: https://doi.org/10.1051/jp4:2001435

Study of the cyclic softening of an under-aged gamma'-precipitated nickel-base superalloy (Waspaloy) p. Pr4-293

M. Risbet, X. Feaugas and M. Clavel

DOI: https://doi.org/10.1051/jp4:2001436

Behavior of the nitrogen bearing martensitic stainless steel: XD15NW in cryotechnical environment p. Pr4-303

L. Manes, J.M. De Monicault and R. Gras

DOI: https://doi.org/10.1051/jp4:2001437

Analysis of texture effects on fatigue behaviour of 316L stainless steel p. Pr4-311

P. Villechaise, M. Mineur and J. Mendez

DOI: https://doi.org/10.1051/jp4:2001438

Tensile and fatigue properties as influenced by environment of a FeAl alloy prepared by mechanical alloying p. Pr4-321

A. Tonneau and G. Hénaff

DOI: https://doi.org/10.1051/jp4:2001439

Identification of a microstructural model for steels subjected to large tensile and/or simple shear deformations p. Pr4-329

H. Haddadi, S. Bouvier and P. Levée

DOI: https://doi.org/10.1051/jp4:2001440

Shear band instabilities in compacted metal powder with or without interparticle cohesion p. Pr4-339

V. Tvergaard and P. Redanz

DOI: https://doi.org/10.1051/jp4:2001441

The influence of the microstructure on the effective properties of duplex-type materials under purely thermal loading p. Pr4-349

V.V. Silberschmidt and E.A. Werner

DOI: https://doi.org/10.1051/jp4:2001442

Mechanical behaviour of alloys containing stable or evolving heterogeneous arrangements of particles p. Pr4-357

J. Lépinoux and Y. Estrin

DOI: https://doi.org/10.1051/jp4:2001443

A theoretical investigation of the contribution of texture and dislocation sheets on strain path change effects in BCC metals p. Pr4-365

B. Peeters, P. Van Houtte, S. R. Kalidindi and E. Aernoudt

DOI: https://doi.org/10.1051/jp4:2001444

Influence of the texture of soft magnetic materials on their magneto-elastic behaviour p. Pr4-373

N. Buiron, L. Hirsinger and R. Billardon

DOI: https://doi.org/10.1051/jp4:2001445

Comparison of physically based constitutive laws used for numerical simulations of plasticity of single crystals p. Pr4-381

P. Balland, L. Tabourot and M. Fivel

DOI: https://doi.org/10.1051/jp4:2001446

Modeling of amorphous solids by polyclustering technique p. Pr4-389

I. Dobovsek

DOI: https://doi.org/10.1051/jp4:2001447

Le Journal de Physique IV

Volume 11 / No PR4 (Septembre 2001)

4th European Mechanics of Materials Conference on Processes, Microstructures and Mechanical Properties