| Issue |
J. Phys. IV France
Volume 11, Number PR4, Septembre 2001
4th European Mechanics of Materials Conference on Processes, Microstructures and Mechanical Properties
|
|
|---|---|---|
| Page(s) | Pr4-83 - Pr4-90 | |
| DOI | https://doi.org/10.1051/jp4:2001411 | |
4th European Mechanics of Materials Conference on Processes, Microstructures and Mechanical Properties
J. Phys. IV France 11 (2001) Pr4-83-Pr4-90
DOI: 10.1051/jp4:2001411
1 GRCM, INSA, 20 avenue des Buttes de Cöesmes, 35043 Rennes cedex, France
2 LPMTM-CNRS, avenue J.B. Clément, 93430 Villetaneuse, France
3 IFIR, UNR-CONICET, 27 de Febrero 210 bis Rosario, Argentina
4 CEA Saclay, CEREM/DECM/SRMA, 91191 Gif-sur-Yvette cedex, France
© EDP Sciences 2001
J. Phys. IV France 11 (2001) Pr4-83-Pr4-90
DOI: 10.1051/jp4:2001411
Final textures in cold rolled Zr702α polycrystalline samples
H. Francillette1, B. Bacroix2, R .A. Lebensohn3 and J.L. Béchade41 GRCM, INSA, 20 avenue des Buttes de Cöesmes, 35043 Rennes cedex, France
2 LPMTM-CNRS, avenue J.B. Clément, 93430 Villetaneuse, France
3 IFIR, UNR-CONICET, 27 de Febrero 210 bis Rosario, Argentina
4 CEA Saclay, CEREM/DECM/SRMA, 91191 Gif-sur-Yvette cedex, France
Abstract
The ability to access to large plastic deformations in cold rolling is applied here in order to determine the final orientations of different initial textures of Zr702α polycrystalline samples (T1-T4 textures). A distribution of the <c> axes in the vicinity of the normal direction (ND) of the sheets and an isotropic repartition of the {[MATH]} poles, almost in the rolling-transverse plane (RD-TD), appears as a final orientation for most of the analyzed samples. No significant reorientation of the {0002} poles from the (RD-ND) plane or from the vicinity of the ND direction to a stable orientation in the (ND-TD) plane is observed.
© EDP Sciences 2001