Nanostructured recycled hardmetals p. Pr4-3 F. Arcuri, R. Ricceri et P. Matteazzi DOI: https://doi.org/10.1051/jp4:2001401 PDF (205.9 KB)
Processing and characterisation of nanocrystalline iron aluminide coatings prepared by thermal spraying of milled powders p. Pr4-11 T. Grosdidier, H. L. Liao, S. Lenhard, A. Tidu et S. Revol DOI: https://doi.org/10.1051/jp4:2001402 PDF (1.457 MB)
Investigation of mechanical properties in cryomilled dispersion strengthened aluminium p. Pr4-19 A. Soreng, J.I. Moe et E. Hellum DOI: https://doi.org/10.1051/jp4:2001403 PDF (421.3 KB)
Microstructure evolutions in pearlitic steels and Cu/Nb wires resulting from severe plastic deformation during drawing p. Pr4-27 X. Sauvage, L. Thilly et D. Blavette DOI: https://doi.org/10.1051/jp4:2001404 PDF (716.0 KB)
Optimization of high strength materials : Design of the engineering parameters through the nanostructure characterization p. Pr4-33 L. Thilly, F. Lecouturier, M. Véron, E. Snoeck, J.P. Peyrade et S. Askénazy DOI: https://doi.org/10.1051/jp4:2001405 PDF (1.856 MB)
Influence of the heat treatment of the melt on the structure and mechanical behaviour of metallic glass ribbons p. Pr4-41 M. Calvo-Dahlborg, J.M. Ruppert, E.D. Tabachnikova, V.Z. Bengus, U. Dahlborg, F. Häussler, V.E. Sidorov et P.S. Popel DOI: https://doi.org/10.1051/jp4:2001406 PDF (933.1 KB)
Porous titanium obtained by P/M p. Pr4-51 R. Ricceri, F. Arcuri et P. Matteazzi DOI: https://doi.org/10.1051/jp4:2001407 PDF (1.298 MB)
Texture and crystallite microstrain development during tensile deformation of copper - simulation and comparison to experimental results p. Pr4-61 S. Aris, R.V. Martins, J. Wegener, V. Honkimäki et A. Pyzalla DOI: https://doi.org/10.1051/jp4:2001408 PDF (293.4 KB)
Recrystallization kinetics and associated textures of Cu-bearing Ti-IF steels p. Pr4-69 S. Diligent-Berveiller, E. Aeby-Gautier, P. Weisbecker, M.H. Mathon, T. Iung, H. Réglé et P. Zimmer DOI: https://doi.org/10.1051/jp4:2001409 PDF (742.2 KB)
Effect of solutes on the dynamic recrystallization microstructure of nickel p. Pr4-77 R. Le Gall, P. Bocher, B. Verlinden et J.J. Jonas DOI: https://doi.org/10.1051/jp4:2001410 PDF (488.6 KB)
Final textures in cold rolled Zr702α polycrystalline samples p. Pr4-83 H. Francillette, B. Bacroix, R .A. Lebensohn et J.L. Béchade DOI: https://doi.org/10.1051/jp4:2001411 PDF (813.7 KB)
Effect of cold rolling on the transition texture of commercially pure titanium p. Pr4-91 N. Gey, M. Humbert et A.K. Singh DOI: https://doi.org/10.1051/jp4:2001412 PDF (378.6 KB)
Influence of hydrostatic recrystallization on the microstructure and mechanical properties of ultra-high molecular weight polyethylene p. Pr4-99 C. G'Sell, B. Lagathu, C. Cunat, J. von Stebut et D. Mainard DOI: https://doi.org/10.1051/jp4:2001413 PDF (1.432 MB)
Mechanical behaviour and microstructural evolution of a microalloyed C-Mn steel during hot forming process p. Pr4-107 P. Thibaux, D. Jouaffre, D. Feuillu, Y. Chastel et A.-M. Chaze DOI: https://doi.org/10.1051/jp4:2001414 PDF (711.1 KB)
Incorporation of microstructure and texture models into FEM p. Pr4-115 H. Aretz, R. Luce, M. Wolske, R. Kopp, M. Gördeler, G. Pomana et G. Gottstein DOI: https://doi.org/10.1051/jp4:2001415 PDF (303.8 KB)
Modelling of full-scale industrial rolling and recrystallisation of strips of alloy 3103 p. Pr4-123 H.E. Vatne, F. Perocheau, H.-E. Ekström, L. Poizat, E. Nes, J. Hagström, M. Lyttle et T. Furu DOI: https://doi.org/10.1051/jp4:2001416 PDF (773.4 KB)
Extrusion of different aluminium alloys ; experimental work and modelling treatments p. Pr4-131 T. Furu, D.H. Bratland, H.E. Vatne, S. Abtahi, B. Bengtsson et J. Hou DOI: https://doi.org/10.1051/jp4:2001417 PDF (344.1 KB)
Formation of martensite - austenite constituents in the intercritically reheated HAZ of a HSLA steel p. Pr4-141 A. Lambert, P. Maugis, A.F. Gourgues, T. Sturel et A. Pineau DOI: https://doi.org/10.1051/jp4:2001418 PDF (418.8 KB)
Diffusional phase transformations in steel - theory and application to continuous casting p. Pr4-149 E. Gamsjäger, C.M. Chimani, F.D. Fischer et J. Svoboda DOI: https://doi.org/10.1051/jp4:2001419 PDF (1.613 MB)
Microstructure and residual stresses issued from the bonding of an austenitic onto a ferritic steel by solid diffusion p. Pr4-157 H. Burlet, M. Martinez et G. Cailletaud DOI: https://doi.org/10.1051/jp4:2001420 PDF (734.2 KB)
Transformation plasticity in titanium alpha double prime martensite p. Pr4-165 O.M. Ivasishin et R.V. Teliovich DOI: https://doi.org/10.1051/jp4:2001421 PDF (1.138 MB)
Transformation induced plasticity in martensitic transformation of ferrous alloys p. Pr4-173 S. Grostabussiat, L. Taleb, J.F. Jullien et F. Sidoroff DOI: https://doi.org/10.1051/jp4:2001422 PDF (310.0 KB)
Bainitic transformation under stress in medium alloyed steels p. Pr4-181 M. Veaux, J.C. Louin, J.P. Houin, S. Denis, P. Archambault et E. Aeby-Gautier DOI: https://doi.org/10.1051/jp4:2001423 PDF (1.176 MB)
Study of the martensitic transformation on a Cr-Ni-Mo-Al-Ti steel for different thermomechanical paths p. Pr4-189 F. Azzouz, G. Cailletaud, F.D. Fischer, A. Pineau et K. Tanaka DOI: https://doi.org/10.1051/jp4:2001424 PDF (885.8 KB)
Adaptive composites with embedded shape memory alloys p. Pr4-197 M. Parlinska, H. Clech, J.A. Balta, V. Michaud, J.-E. Bidaux, J.-A.E. Manson et R. Gotthardt DOI: https://doi.org/10.1051/jp4:2001425 PDF (4.200 MB)
CuZnAl single crystals pseudoelastic behaviour under biaxial tensile loading: Observations and analysis p. Pr4-205 A. Vivet et C. Lexcellent DOI: https://doi.org/10.1051/jp4:2001426 PDF (3.085 MB)
Microstructural modifications and material response in machining of steels p. Pr4-213 B. Changeux et J.-L. Lebrun DOI: https://doi.org/10.1051/jp4:2001427 PDF (4.720 MB)
Physical modelling of microstructure and mechanical properties of dual-phase steel p. Pr4-223 O. Bouaziz, T. lung, M. Kandel et C. Lecomte DOI: https://doi.org/10.1051/jp4:2001428 PDF (3.466 MB)
High strength microstructural forms developed in titanium alloys by rapid heat treatment p. Pr4-233 O.M. Ivasishin DOI: https://doi.org/10.1051/jp4:2001429 PDF (4.306 MB)
A low cost metastable beta titanium alloy: Thermal treatments, microstructures and mechanical properties p. Pr4-241 F. Prima, P. Vermaut, I. Thibon, J. Debuigne et D. Ansel DOI: https://doi.org/10.1051/jp4:2001430 PDF (4.181 MB)
Experimental and numerical analysis of the effects of process parameters on the properties of components in metal injection molding p. Pr4-249 Th. Barriere, D. Renault et J.C. Gelin DOI: https://doi.org/10.1051/jp4:2001431 PDF (3.723 MB)
A generalised sliding wear model for inhomogeneous coatings p. Pr4-257 W. Yan, E.P. Busso et N.P. O'Dowd DOI: https://doi.org/10.1051/jp4:2001432 PDF (3.330 MB)
Localization of deformation in polycrystalline ice p. Pr4-267 P. Mansuy, A. Philip et J. Meyssonnier DOI: https://doi.org/10.1051/jp4:2001433 PDF (4.973 MB)
Mechanical behaviour of a semicrystalline polymer before necking p. Pr4-275 N. Brusselle-Dupend, D. Lai, X. Feaugas, M. Guigon et M. Clavel DOI: https://doi.org/10.1051/jp4:2001434 PDF (2.603 MB)
Stacking fault energy (s.f.e.) and grain size effects (d) on the tensile behaviour of f.c.c. polycrystalline alloys at 300 K: Back stress and effective stress evolutions p. Pr4-283 H. Haddou, C. Gaudin et X. Feaugas DOI: https://doi.org/10.1051/jp4:2001435 PDF (4.693 MB)
Study of the cyclic softening of an under-aged gamma'-precipitated nickel-base superalloy (Waspaloy) p. Pr4-293 M. Risbet, X. Feaugas et M. Clavel DOI: https://doi.org/10.1051/jp4:2001436 PDF (4.040 MB)
Behavior of the nitrogen bearing martensitic stainless steel: XD15NW in cryotechnical environment p. Pr4-303 L. Manes, J.M. De Monicault et R. Gras DOI: https://doi.org/10.1051/jp4:2001437 PDF (4.045 MB)
Analysis of texture effects on fatigue behaviour of 316L stainless steel p. Pr4-311 P. Villechaise, M. Mineur et J. Mendez DOI: https://doi.org/10.1051/jp4:2001438 PDF (5.081 MB)
Tensile and fatigue properties as influenced by environment of a FeAl alloy prepared by mechanical alloying p. Pr4-321 A. Tonneau et G. Hénaff DOI: https://doi.org/10.1051/jp4:2001439 PDF (4.072 MB)
Identification of a microstructural model for steels subjected to large tensile and/or simple shear deformations p. Pr4-329 H. Haddadi, S. Bouvier et P. Levée DOI: https://doi.org/10.1051/jp4:2001440 PDF (4.209 MB)
Shear band instabilities in compacted metal powder with or without interparticle cohesion p. Pr4-339 V. Tvergaard et P. Redanz DOI: https://doi.org/10.1051/jp4:2001441 PDF (2.979 MB)
The influence of the microstructure on the effective properties of duplex-type materials under purely thermal loading p. Pr4-349 V.V. Silberschmidt et E.A. Werner DOI: https://doi.org/10.1051/jp4:2001442 PDF (3.739 MB)
Mechanical behaviour of alloys containing stable or evolving heterogeneous arrangements of particles p. Pr4-357 J. Lépinoux et Y. Estrin DOI: https://doi.org/10.1051/jp4:2001443 PDF (3.933 MB)
A theoretical investigation of the contribution of texture and dislocation sheets on strain path change effects in BCC metals p. Pr4-365 B. Peeters, P. Van Houtte, S. R. Kalidindi et E. Aernoudt DOI: https://doi.org/10.1051/jp4:2001444 PDF (3.681 MB)
Influence of the texture of soft magnetic materials on their magneto-elastic behaviour p. Pr4-373 N. Buiron, L. Hirsinger et R. Billardon DOI: https://doi.org/10.1051/jp4:2001445 PDF (3.745 MB)
Comparison of physically based constitutive laws used for numerical simulations of plasticity of single crystals p. Pr4-381 P. Balland, L. Tabourot et M. Fivel DOI: https://doi.org/10.1051/jp4:2001446 PDF (3.646 MB)
Modeling of amorphous solids by polyclustering technique p. Pr4-389 I. Dobovsek DOI: https://doi.org/10.1051/jp4:2001447 PDF (4.346 MB)
