| Issue |
J. Phys. IV France
Volume 11, Number PR4, Septembre 2001
4th European Mechanics of Materials Conference on Processes, Microstructures and Mechanical Properties
|
|
|---|---|---|
| Page(s) | Pr4-115 - Pr4-121 | |
| DOI | https://doi.org/10.1051/jp4:2001415 | |
4th European Mechanics of Materials Conference on Processes, Microstructures and Mechanical Properties
J. Phys. IV France 11 (2001) Pr4-115-Pr4-121
DOI: 10.1051/jp4:2001415
1 Institute of Metal Forming (IBF), University of Technology Aachen, Intzestrasse 10, 52056 Aachen, Germany
2 Institute of Physical Metallurgy and Metal Physics (IMM), University of Technology Aachen, Kopernikusstrasse 14, 52056 Aachen, Germany
© EDP Sciences 2001
J. Phys. IV France 11 (2001) Pr4-115-Pr4-121
DOI: 10.1051/jp4:2001415
Incorporation of microstructure and texture models into FEM
H. Aretz1, R. Luce1, M. Wolske1, R. Kopp1, M. Gördeler2, G. Pomana2 and G. Gottstein21 Institute of Metal Forming (IBF), University of Technology Aachen, Intzestrasse 10, 52056 Aachen, Germany
2 Institute of Physical Metallurgy and Metal Physics (IMM), University of Technology Aachen, Kopernikusstrasse 14, 52056 Aachen, Germany
Abstract
This article will show some new results of a hot fiat rolling FEM-simulation of AlMg1Mn1 material coupled with a flow stress and a texture model. The influence of the number of possible slip systems and the critical shear stress in the slip systems on the simulated rolling force and texture will be discussed and validated with experimental results.
© EDP Sciences 2001