Materials selection in mechanical design p. C7-1 M.F. ASHBY et D. CEBON DOI: https://doi.org/10.1051/jp4:1993701 PDF (350.5 KB)
Prospects for a second generation supersonic transport p. C7-11 S.J. SWADLING DOI: https://doi.org/10.1051/jp4:1993702 PDF (1.138 MB)
Materials used in automobile manufacture - current state and perspectives p. C7-31 M. WILHELM DOI: https://doi.org/10.1051/jp4:1993703 PDF (1.414 MB)
Scanning tunneling microscopy p. C7-41 J.K. GIMZEWSKI DOI: https://doi.org/10.1051/jp4:1993704 PDF (4.137 MB)
Recent trends in steel making and their implications on mechanical properties p. C7-51 F. MUDRY DOI: https://doi.org/10.1051/jp4:1993705 PDF (418.2 KB)
Strain rate and temperature effect on the deformation behavior of the original hadfield steel p. C7-61 E. BAYRAKTAR, C. LEVAILLANT et S. ALTINTAS DOI: https://doi.org/10.1051/jp4:1993706 PDF (801.5 KB)
The use of modern physical metallurgy in the development and characterization of special stainless steels p. C7-67 J.-O. NILSSON DOI: https://doi.org/10.1051/jp4:1993707 PDF (2.309 MB)
Structure and properties of TM processed HSLA steels p. C7-77 A.C. KNEISSL et P. BALDINGER DOI: https://doi.org/10.1051/jp4:1993708 PDF (989.4 KB)
Effects of accelerated cooling after rolling and of additions of Ni and Nb on the microstructure and mechanical behaviour of 0.1 wt% C steels p. C7-83 R. TAILLARD, P. DESHAYES, E. AMORIS et C. PERDRIX DOI: https://doi.org/10.1051/jp4:1993709 PDF (502.4 KB)
Detection of low temperature sensitization of alloy 800 with STEM Philips EM 430 p. C7-89 V.J. CÍHAL, V. CÍHAL et G.D. MAJO DOI: https://doi.org/10.1051/jp4:1993710 PDF (159.5 KB)
Brittle fracture characteristics of a 50 mm boron containing HSLA steel p. C7-93 N.S. WRIGLEY, G. JOLLEY et J.J. BUTLER DOI: https://doi.org/10.1051/jp4:1993711 PDF (793.9 KB)
Strength of 10CR-N martensitic steels p. C7-97 F. BAHRAMI et A. HENDRY DOI: https://doi.org/10.1051/jp4:1993712 PDF (166.5 KB)
Structure/property relationships in HSLA steel with low carbon and manganese and increased silicon content p. C7-101 A. KÖTHE, J. RICHTER, A. GÜTH, B. MÜSGEN et H. BAUMGARDT DOI: https://doi.org/10.1051/jp4:1993713 PDF (160.9 KB)
Fracture toughness of fine grained micro-alloyed steels at nil ductility temperature and transition range p. C7-105 J. VOJVODIC-GVARDJANCIC, B. ULE et S. AZMAN DOI: https://doi.org/10.1051/jp4:1993714 PDF (158.8 KB)
The electronic microscope analysis used to study the martensite morphology in high strength low alloy steels p. C7-109 M. ISAC DOI: https://doi.org/10.1051/jp4:1993715 PDF (1.548 MB)
Research regarding the hydrogen diffusion in steels p. C7-115 V. MICLOSI, I. TONOIU, G.H. SOLOMON et A. VOICULESCU DOI: https://doi.org/10.1051/jp4:1993716 PDF (109.1 KB)
Research regarding the influence of axial electromagnetic pulsation of the liquid metal bath upon the characteristics of the weld p. C7-119 V. MICLOSI, I. TONOIU et G.H. SOLOMON DOI: https://doi.org/10.1051/jp4:1993717 PDF (1.055 MB)
Damage and failure processes in structural 347H SS materials p. C7-123 E.R. SCHIAPPARELLI et S.C. PRADO DOI: https://doi.org/10.1051/jp4:1993718 PDF (1.194 MB)
Redistribution of interstitial atoms and ageing of Fe-N α martensite p. C7-127 J. FOCT et C. CORDIER-ROBERT DOI: https://doi.org/10.1051/jp4:1993719 PDF (190.1 KB)
The effect of alloy content on the microstructure of as-deposited weldmetal in 9Cr-based ferrous weldments p. C7-131 R.H. HAIGH et M. STRANGWOOD DOI: https://doi.org/10.1051/jp4:1993720 PDF (998.8 KB)
Application of dynamical ion mixing techniques to the improvement of the fatigue resistance of a 316L stainless steel p. C7-135 P. VILLECHAISE, J. MENDEZ et J. DELAFOND DOI: https://doi.org/10.1051/jp4:1993721 PDF (642.0 KB)
Properties using metallic amorphous ribbons from (Fe-Co-Ni)- metalloid system, obtained by melt-quenching p. C7-139 C. MUNTEANU, I. RUSU, A. JIANU, I. APACHITEI et C. CIOCHINA DOI: https://doi.org/10.1051/jp4:1993722 PDF (204.3 KB)
Mixed structures in continuously cooled low-carbon automotive steels p. C7-147 F.A. KHALID et D.V. EDMONDS DOI: https://doi.org/10.1051/jp4:1993723 PDF (1.842 MB)
Properties and microstructure of high speed steel powders produced under rapid solidification conditions p. C7-153 M. MISKOVICOVÁ, M. FEDORCÁKOVÁ et V. BODÁK DOI: https://doi.org/10.1051/jp4:1993724 PDF (140.1 KB)
The influence of deformation rate on recrystallization kinetics of austenitic alloys p. C7-157 P. ZUNA DOI: https://doi.org/10.1051/jp4:1993725 PDF (64.61 KB)
Titanium alloys. Advances in alloys, processes, products and applications p. C7-161 P.A. BLENKINSOP DOI: https://doi.org/10.1051/jp4:1993726 PDF (464.3 KB)
Precipitation mechanisms and subsequent hardening kinetics in the β-CEZ alloy p. C7-171 Y. COMBRES, J. BECHET et A. VASSEL DOI: https://doi.org/10.1051/jp4:1993727 PDF (1.488 MB)
Advances in aluminium alloy products for structural applications in transportation p. C7-179 J.T. STALEY et D.J. LEGE DOI: https://doi.org/10.1051/jp4:1993728 PDF (1.154 MB)
New rapidly solidified aluminium alloys for elevated temperature applications on aerospace structures p. C7-191 Y. BARBAUX et G. PONS DOI: https://doi.org/10.1051/jp4:1993729 PDF (290.7 KB)
The correlation between microstructure and thermomechanical properties studied on AlCuMg-based alloys p. C7-197 U. SCHMIDT et R. UNGER DOI: https://doi.org/10.1051/jp4:1993730 PDF (360.6 KB)
Spray cast Al-Si base alloys for stiffness and fatigue strength requirements p. C7-207 M. COURBIERE et A. MOCELLIN DOI: https://doi.org/10.1051/jp4:1993731 PDF (932.7 KB)
Microstructures and mechanical properties of an Osprey aluminium 7000 alloy p. C7-215 L. COTTIGNIES, Y. BRECHET, M. AUDIER, F. LIVET, F. LOUCHET et P. SAINFORT DOI: https://doi.org/10.1051/jp4:1993732 PDF (181.8 KB)
Influence of annealing duration on properties of AlLiCuMg thin-walled extruded shapes p. C7-219 V. OCENÁSEK, M. SLÁMOVÁ et K. SPERLINK DOI: https://doi.org/10.1051/jp4:1993733 PDF (221.6 KB)
Heat line formation during roll-casting of aluminium alloys at thin gauges p. C7-227 M. YUN, J.D. HUNT et D.V. EDMONDS DOI: https://doi.org/10.1051/jp4:1993734 PDF (373.4 KB)
Cinétiques de précipitation de θ' et γ dans Al-Cu et Al-Ag p. C7-231 N. TIGHIOUART, H. YOUSFI et M. KADI-HANIFI DOI: https://doi.org/10.1051/jp4:1993735 PDF (123.8 KB)
Rapidly solidified Al-Fe-Mo-Si alloys for high temperatures applications p. C7-235 M.C.S. DE MACÊDO et G. MICHOT DOI: https://doi.org/10.1051/jp4:1993736 PDF (1.421 MB)
Castability tests applied to an aluminium-copper alloy p. C7-239 B. GARDA, L. FORTIN et F. DURAND DOI: https://doi.org/10.1051/jp4:1993737 PDF (182.1 KB)
Transformation processes during annealing of Al-amorphous alloys p. C7-243 N. PETRESCU, M. PETRESCU, M. CALIN, A.D. JIANU et M. FECIORU DOI: https://doi.org/10.1051/jp4:1993738 PDF (642.5 KB)
Strain hardening of aluminium alloy 3004 in the deep drawing and ironing processes p. C7-247 J. COURBON et J.L. DUVAL DOI: https://doi.org/10.1051/jp4:1993739 PDF (177.9 KB)
Microstructure control and extrudability of aluminium-Mg-Si alloys microalloyed with manganese p. C7-251 S. ZAJAC, B. HUTCHINSON, A. JOHANSSON, L.-O. GULLMAN et R. LAGNEBORG DOI: https://doi.org/10.1051/jp4:1993740 PDF (236.7 KB)
High temperature mechanical properties of AlMgZn alloys with copper and zirconium additions p. C7-255 N.Q. CHINH, A. JUHÁSZ, P. TASNÁDI, J. LENDVAI et I. KOVÁCS DOI: https://doi.org/10.1051/jp4:1993741 PDF (1.447 MB)
Modelling the creep anisotropy of nickel-base superalloys with a composite model p. C7-265 L. MÜLLER DOI: https://doi.org/10.1051/jp4:1993742 PDF (200.8 KB)
Precipitation kinetics in N18 P/M superalloy : experimental study and numerical modelling p. C7-271 N. GAYRAUD, F. MORET, X. BAILLIN et P.E. MOSSER DOI: https://doi.org/10.1051/jp4:1993743 PDF (920.9 KB)
The spray-forming of thin wall shapes p. C7-277 G. MONTAVON, E. ROUSSEL, C. CODDET, D. CORNU, J.M. DE MONICAULT, J.C. GARCIA, F. PELLERIN, E . FAUVET et J.P. HUCHIN DOI: https://doi.org/10.1051/jp4:1993744 PDF (1.103 MB)
Heat treatment structure modification of wrought nickel based superalloy and its creep resistance p. C7-283 J. ZRNÍK et V. VRCHOVINSKÝ DOI: https://doi.org/10.1051/jp4:1993745 PDF (1.372 MB)
Influence of heat treatments on the mechanical properties and microstructure of a 50Cr-50Ni niobium containing alloy p. C7-289 G. CAIRONI, E. GARIBOLDI, G. SILVA et M. VEDANI DOI: https://doi.org/10.1051/jp4:1993746 PDF (1.695 MB)
Recent breakthroughs in nickel base superalloys p. C7-297 Y. HONNORAT DOI: https://doi.org/10.1051/jp4:1993747 PDF (1.235 MB)
TEM investigation of the microstructure in a single crystal nickelbase superalloy creep tested in [011] orientation p. C7-325 T. KUTTNER et M. FELLER-KNIEPMEIER DOI: https://doi.org/10.1051/jp4:1993748 PDF (1.321 MB)
Effects of composition on degree of order and ordering kinetics of Ni-Cr based superalloys p. C7-331 A. MARUCCO DOI: https://doi.org/10.1051/jp4:1993749 PDF (245.3 KB)
Microstructural refinement and superplasticity of IN-718 superalloy p. C7-335 L. CESCHINI, G.P. CAMMAROTA, G.L. GARAGNANI et A. AFRICANTOV DOI: https://doi.org/10.1051/jp4:1993750 PDF (841.1 KB)
Solidification behaviour of Ni-base superalloy CMSX-6 p. C7-339 D. MA, M. MEYER TER VEHN, P. BUSSE et P.R. SAHM DOI: https://doi.org/10.1051/jp4:1993751 PDF (503.6 KB)
Segregation and microstructure heterogenity of single crystal nickel based superalloy ŽS 26 p. C7-343 J. ZRNÍK, P. MAKROCZY, M. ŽITÑANSKÝ et M. HAZLINGER DOI: https://doi.org/10.1051/jp4:1993752 PDF (1.283 MB)
Effect of a long-term prior aging on the tensile behaviour of a high-performance single crystal superalloy p. C7-347 M. PESSAH-SIMONETTI, P. CARON et T. KHAN DOI: https://doi.org/10.1051/jp4:1993753 PDF (1.650 MB)
High temperature thermal diffusivity of nickel-based superalloys and intermetallic compounds p. C7-351 A. HAZOTTE, B. PERROT et P. ARCHAMBAULT DOI: https://doi.org/10.1051/jp4:1993754 PDF (227.8 KB)
Chemical composition around γ/γ' interface in single crystal nickel-based superalloys in the early stage of creep p. C7-355 A. RACINE et A. HAZOTTE DOI: https://doi.org/10.1051/jp4:1993755 PDF (187.1 KB)
The effect of environment and structure on creep fatigue crack propagation in a P/M astroloy p. C7-359 H. LOYER-DANFLOU, M. MARTY, A. WALDER, J. MENDEZ et P. VIOLAN DOI: https://doi.org/10.1051/jp4:1993756 PDF (168.8 KB)
Active deformation mechanisms responsible for ductility and flow stress dependence on temperature in TiAl alloys p. C7-365 M.A. MORRIS DOI: https://doi.org/10.1051/jp4:1993757 PDF (1.982 MB)
The microstructure of plasma arc cold-hearth melted Ti-48Al-2Mn-2Nb p. C7-371 T.P. JOHNSON, N.E. JESPER, J.M. YOUNG, R.M. WARD et M.H. JACOBS DOI: https://doi.org/10.1051/jp4:1993758 PDF (1.144 MB)
Solidification and metastable phase formation in conventional and planar flow cast Ti-48.8at%Al-2.2at%V p. C7-377 G. SHAO, T. GROSDIDIER et P. TSAKIROPOULOS DOI: https://doi.org/10.1051/jp4:1993759 PDF (1.725 MB)
Various transformation modes observed in two-phase γ+α2 TiAl-based alloys p. C7-383 A. DENQUIN et S. NAKA DOI: https://doi.org/10.1051/jp4:1993760 PDF (2.417 MB)
Superplastic behaviour and mechanical properties of two phase TiAl alloys p. C7-389 T. TSUZUKU et H. SATO DOI: https://doi.org/10.1051/jp4:1993761 PDF (487.5 KB)
Boron segregation in a (Fe, V, B) TiAl based alloy p. C7-397 B.J. INKSON, C.B. BOOTHROYD et C.J. HUMPHREYS DOI: https://doi.org/10.1051/jp4:1993762 PDF (1.633 MB)
Gas formation during reaction sintering of titanium aluminides p. C7-403 G. LEITNER et K. JAENICKE-RÖSSLER DOI: https://doi.org/10.1051/jp4:1993763 PDF (291.0 KB)
Micromechanisms of fracture and fatigue in Ti3Al based and TiAl based intermetallics p. C7-411 A.W. JAMES, R.A. CHAVE, C.A. HIPPSLEY et P. BOWEN DOI: https://doi.org/10.1051/jp4:1993764 PDF (3.311 MB)
Synthesis of nano-structured high-temperature titanium aluminide by instrumented pulse electro-discharge consolidation of mechanically alloyed amorphous powder p. C7-423 H. KIMURA DOI: https://doi.org/10.1051/jp4:1993765 PDF (361.3 KB)
The influence of chromium additions on order and ductility in Fe3Al intermetallic p. C7-429 D.G. MORRIS, M. DADRAS et M.A. MORRIS DOI: https://doi.org/10.1051/jp4:1993766 PDF (1.073 MB)
"Optimisation" of imaging conditions for weak beam studies of dislocation core structures in Ti3Al p. C7-435 J.M.K. WIEZOREK DOI: https://doi.org/10.1051/jp4:1993767 PDF (857.3 KB)
Characterizing faulted dipoles in TiAl with electron microscopy and computed image simulations p. C7-441 B. VIGUIER, K.J. HEMKER, R. SCHÄUBLIN et J.L. MARTIN DOI: https://doi.org/10.1051/jp4:1993768 PDF (1.598 MB)
Strain hardening in Ni3 (Al, Hf) p. C7-445 P. SPÄTIG, J. BONNEVILLE et J.-L. MARTIN DOI: https://doi.org/10.1051/jp4:1993769 PDF (194.6 KB)
Irradiation-induced defects in solid solution and intermetallic compounds of the Ni-Al system : the effects of a third element (Ti or Ta) p. C7-449 T. TARFA et O. DIMITROV DOI: https://doi.org/10.1051/jp4:1993770 PDF (203.5 KB)
Influence of structure and composition on atomic mobility in Ni(Al)-based solid solutions and Ni3Al-based intermetallics p. C7-453 T. TARFA, C. DIMITROV et O. DIMITROV DOI: https://doi.org/10.1051/jp4:1993771 PDF (196.3 KB)
Dislocation mechanisms of creep in Ni3Al p. C7-457 T.S. RONG, I.P. JONES et R.E. SMALLMAN DOI: https://doi.org/10.1051/jp4:1993772 PDF (211.2 KB)
Thermomechanical processing and mechanical characteristics of particle-strengthened iron aluminide-based alloys p. C7-461 E. BATAWI, J. PHILLIPS, J.A. PETERS et G. EGGELER DOI: https://doi.org/10.1051/jp4:1993773 PDF (982.7 KB)
TEM investigation of rapidly quenched metastable γ TiAl phases p. C7-465 G. SHAO, T. GROSDIDIER et P. TSAKIROPOULOS DOI: https://doi.org/10.1051/jp4:1993774 PDF (1.420 MB)
TiAl-based high temperature materials made from extremely deformed elemental powders p. C7-469 G.-X. WANG, M. DAHMS et F. PIRWITZ DOI: https://doi.org/10.1051/jp4:1993775 PDF (1.016 MB)
Investigation of phase equilibria in the ternary Ti-Al-Sn p. C7-473 M. PIETZKA, U. GRUBER et J.C. SCHUSTER DOI: https://doi.org/10.1051/jp4:1993776 PDF (84.01 KB)
Structural evolution of Ni3Al-based intermetallic compounds during tensile or cold-rolling deformations p. C7-477 M. VILTANGE et O. DIMITROV DOI: https://doi.org/10.1051/jp4:1993777 PDF (154.3 KB)
Influence of purity level on the microstructure and some properties of γ Ti-Al intermetallics p. C7-481 C. DIMITROV, J.-L. PASTOL, J. BIGOT et O. DIMITROV DOI: https://doi.org/10.1051/jp4:1993778 PDF (838.2 KB)
High temperature phase transformation kinetics and their effects on diffusion bonding of Ti-48Al-2Mn-2Nb p. C7-485 S.P. GODFREY, P.L. THREADGILL et M. STRANGWOOD DOI: https://doi.org/10.1051/jp4:1993779 PDF (823.0 KB)
Magnesium alloys for structural applications ; recent advances p. C7-491 H. WESTENGEN DOI: https://doi.org/10.1051/jp4:1993780 PDF (1.122 MB)
Oxidation processes in zircaloy p. C7-503 D. PÊCHEUR, E. LEFEBVRE et C. LEMAIGNAN DOI: https://doi.org/10.1051/jp4:1993781 PDF (1.354 MB)
Precious-metal-base advanced materials p. C7-509 T. NOWICKI et C. CARBONNAUX DOI: https://doi.org/10.1051/jp4:1993782 PDF (650.0 KB)
Microstructural evolution of α or β quenched zirconium alloys during isothermal agings, between 20 °C and 750 °C p. C7-519 P. MERLE, K. LOUCIF et R. BORRELLY DOI: https://doi.org/10.1051/jp4:1993783 PDF (164.3 KB)
Texture and microstructure of high purity tantalum p. C7-523 D. RAABE, K. LÜCKE et G. GOTTSTEIN DOI: https://doi.org/10.1051/jp4:1993784 PDF (240.3 KB)
Decomposition of β-metastable phase in β-Cez alloy during continuous heating p. C7-527 R. SANGUINETTI, M. ZANDONA, A. PIANELLI et E. GAUTIER DOI: https://doi.org/10.1051/jp4:1993785 PDF (662.9 KB)
Plastic flow and damage of α-zirconium polycrystals p. C7-533 S. CARE et T. BRETHEAU DOI: https://doi.org/10.1051/jp4:1993786 PDF (700.0 KB)
Improvement of engineering performance of magnesium alloys through rapid solidification technique p. C7-537 D. DALOZ et G. MICHOT DOI: https://doi.org/10.1051/jp4:1993787 PDF (753.2 KB)
Thermal cycling of Pb/Sn eutectic alloy p. C7-541 S.F. MOSTAFA, Z.M. EL-BARADIE, H.N. EL-DIN et T.A. EL-BASSUNY DOI: https://doi.org/10.1051/jp4:1993788 PDF (278.8 KB)
H.R.E.M. observation of thermally induced ε-martensite plates in a Fe-Mn-Si-Cr-Ni shape memory alloy p. C7-545 J.L. PUTAUX, L. FEDERZONI, M. MANTEL, G. BLANC et J.P. CHEVALIER DOI: https://doi.org/10.1051/jp4:1993789 PDF (386.9 KB)
Full-potential calculations of the temperature dependence of self-diffusion coefficients : application to Cs p. C7-549 D. FUKS, J. PELLEG, S. DORFMAN et S. RASHKEEV DOI: https://doi.org/10.1051/jp4:1993790 PDF (222.8 KB)
Preparation and characterization of sintered Mo-Re alloys p. C7-553 F. MORITO DOI: https://doi.org/10.1051/jp4:1993791 PDF (190.0 KB)
Improvement of the shape memory effect of a Fe-Mn-Cr-Si-Ni by original thermomechanical treatments p. C7-557 L. FEDERZONI, G. GUÉNIN et M. MANTEL DOI: https://doi.org/10.1051/jp4:1993792 PDF (149.9 KB)
Phase transformation behavior of thin shape memory alloy wires embedded in a polymer matrix composite p. C7-561 J.-E. BIDAUX, L. BATAILLARD, J.-A. MÅNSON et R. GOTTHARDT DOI: https://doi.org/10.1051/jp4:1993793 PDF (237.8 KB)
Influence of dislocation cores on the plasticity of materials p. C7-567 F. LOUCHET DOI: https://doi.org/10.1051/jp4:1993794 PDF (433.1 KB)
Macroscopic nature of brittle fracture p. C7-575 K. WALLIN DOI: https://doi.org/10.1051/jp4:1993795 PDF (358.9 KB)
Description of heterogeneous dislocations distributions p. C7-585 G. SAADA DOI: https://doi.org/10.1051/jp4:1993796 PDF (190.7 KB)
Plasticity of oxide dispersion strengthened ferritic alloys p. C7-591 C. ZAKINE, C. PRIOUL, A. ALAMO et D. FRANCOIS DOI: https://doi.org/10.1051/jp4:1993797 PDF (730.4 KB)
Fracture in duplex structures p. C7-597 J. FOCT, N. AKDUT, T MAGNIN, R. TAILLARD et J.-B. VOGT DOI: https://doi.org/10.1051/jp4:1993798 PDF (1.205 MB)
Damage and failure processes in structural materials p. C7-607 J.D. EMBURY DOI: https://doi.org/10.1051/jp4:1993799 PDF (2.737 MB)
Non-local versus local behaviour of microheterogeneous metals p. C7-621 M. BERVEILLER DOI: https://doi.org/10.1051/jp4:19937100 PDF (283.3 KB)
Extension of an anisotropic creep model to general high temperature deformation of a single crystal superalloy p. C7-629 L.-M. PAN, R.N. GHOSH et M. McLEAN DOI: https://doi.org/10.1051/jp4:19937101 PDF (240.7 KB)
Some aspects of anelastic and microplastic creep of pure Al and two Al-alloys p. C7-635 S. SGOBBA, H.-U. KÜNZI et B. ILSCHNER DOI: https://doi.org/10.1051/jp4:19937102 PDF (1.457 MB)
Damage modelling in nodular cast iron p. C7-643 M.J. DONG, G.K. HU, A. DIBOINE, D. MOULIN et C. PRIOUL DOI: https://doi.org/10.1051/jp4:19937103 PDF (867.8 KB)
Serrated flow and rupture by evolution of internal inhomogeneities p. C7-649 D. PREININGER DOI: https://doi.org/10.1051/jp4:19937104 PDF (302.2 KB)
Cyclic plasticity and fatigue of metals p. C7-659 H. MUGHRABI DOI: https://doi.org/10.1051/jp4:19937105 PDF (1.471 MB)
Early stages of fatigue damage in aluminium and aluminium alloys p. C7-669 R. FOUGERES DOI: https://doi.org/10.1051/jp4:19937106 PDF (2.751 MB)
The role of cyclic slip localization in fatigue damage of materials p. C7-679 J. POLÁK, S. DEGALLAIX et G. DEGALLAIX DOI: https://doi.org/10.1051/jp4:19937107 PDF (3.196 MB)
Achievements and prospects of advanced materials processed by powder technology p. C7-687 W.A. KAYSSER DOI: https://doi.org/10.1051/jp4:19937108 PDF (1.864 MB)
Incoloy alloy MA956. Strain rate and temperature effects on the microstructure and ductility p. C7-697 R.J. SALOMON DOI: https://doi.org/10.1051/jp4:19937109 PDF (1.896 MB)
Mechanical properties of aluminium-based metal matrix composites reinforced with α-alumina platelets p. C7-703 V. MASSARDIER, R. FOUGERES et P. MERLE DOI: https://doi.org/10.1051/jp4:19937110 PDF (341.3 KB)
Elaboration and study of mechanically alloyed O.D.S. ferritic stainless steel p. C7-709 M. BODART, R. BACCINO et F. MORET DOI: https://doi.org/10.1051/jp4:19937111 PDF (2.646 MB)
Influence of the chemical composition and the fabrication process on the behaviour of high temperature oxidation of Fe-Cr-Al alloys p. C7-715 F. CLEMENDOT, F. ARNOLDI, J.B. CEREDE, B. DIONNET, F. NARDOU et J.C. VAN DUYSEN DOI: https://doi.org/10.1051/jp4:19937112 PDF (988.1 KB)
Density as a factor limiting the workability of P/M materials p. C7-721 W. LIBURA et J. ZASADZINSKI DOI: https://doi.org/10.1051/jp4:19937113 PDF (124.9 KB)
Secondary recrystallization of oxide dispersion strengthened ferritic alloys p. C7-727 H. REGLE et A. ALAMO DOI: https://doi.org/10.1051/jp4:19937114 PDF (1.181 MB)
Temperature and oxidation resistance of the ODS materials MA 956 and PM 2000 p. C7-731 H.-J. KLAM DOI: https://doi.org/10.1051/jp4:19937115 PDF (797.6 KB)
Sintered brass from mechanical Cu-Zn powder mixtures p. C7-735 S. DOMSA DOI: https://doi.org/10.1051/jp4:19937116 PDF (822.3 KB)
Deformation aspects of anisotropic-porous bodies sintering p. C7-739 E. OLEVSKY et V. SKOROHOD DOI: https://doi.org/10.1051/jp4:19937117 PDF (149.2 KB)
Fabrication de carbure de titane par combustion auto-entretenue de titane et de carbone : initiation par diffusion à l'état solide p. C7-743 D. VREL, J.-M. LIHRMANN et J.-P. PETITET DOI: https://doi.org/10.1051/jp4:19937118 PDF (172.2 KB)
High temperature mechanical properties of dispersion strengthened copper p. C7-747 C. RIGOLLET, J.M. GENTZBITTEL et G. ROBERT DOI: https://doi.org/10.1051/jp4:19937119 PDF (784.1 KB)
Binding metals to polymers. A short review of basic physical mechanisms p. C7-753 B. ESCAIG DOI: https://doi.org/10.1051/jp4:19937120 PDF (409.9 KB)
Structural and compositional gradients : basic idea, preparation, applications p. C7-763 B. ILSCHNER DOI: https://doi.org/10.1051/jp4:19937121 PDF (527.3 KB)
Impact properties of multilayered materials p. C7-773 A.J. VAZQUEZ VAAMONDE DOI: https://doi.org/10.1051/jp4:19937122 PDF (221.6 KB)
Preparation of hexaferrite multilayers by tape casting p. C7-783 D. ROUSSELLE et D. AUTISSIER DOI: https://doi.org/10.1051/jp4:19937123 PDF (584.1 KB)
X-ray absorption near edge spectroscopy (XANES) study of thermostable polyphenylquinoxaline (PPQ) polymer prior to Cu thin films deposition p. C7-789 G. RICHARD, A. CROS, Y. MATHEY, G. TOURILLON, C. LAFFON et Y. PARENT DOI: https://doi.org/10.1051/jp4:19937124 PDF (153.6 KB)
Glass-mounted high performance electrodes p. C7-793 W. HÄNNI, D. MOREL et H.E. HINTERMANN DOI: https://doi.org/10.1051/jp4:19937125 PDF (418.7 KB)
Analyse de la résistance mécanique d'une interface métal-céramique par l'essai de flexion 4 points : application à des couples metal (Pd-Ag, Pd-Au)-céramique dentaire p. C7-795 R. CHARNAY et P. GUIRALDENQ DOI: https://doi.org/10.1051/jp4:19937126 PDF (235.6 KB)
Analyse de couches ou multicouches par SIMS : interprétation du profil aux interfaces p. C7-803 M. AUCOUTURIER, Ch. GRATTEPAIN, A. TROMSON-CARLI, M. BARBÉ, G. COHEN-SOLAL, Y. MARFAING, F. CHEVRIER, H. LE GALL et D. IMHOFF DOI: https://doi.org/10.1051/jp4:19937127 PDF (1.280 MB)
Interactions between solidification and fluid flow. Effects on cast structures and segregations p. C7-813 G. LESOULT, H. COMBEAU et M. MOUKASSI DOI: https://doi.org/10.1051/jp4:19937128 PDF (854.1 KB)
Plasma melting : intelligent control strategies p. C7-823 R.M. WARD, A.E. FELLOWS, T.P. JOHNSON, J.M. YOUNG et M.H. JACOBS DOI: https://doi.org/10.1051/jp4:19937129 PDF (352.5 KB)
Study on plastic forming of metal alloys in partly-liquid state p. C7-829 W. LAPKOWSKI, M. PIETRZYK et Z. KEDZIERSKI DOI: https://doi.org/10.1051/jp4:19937130 PDF (1.439 MB)
Semi-solid processing of tool steel p. C7-835 P. KAPRANOS, D.H. KIRKWOOD et C.M. SELLARS DOI: https://doi.org/10.1051/jp4:19937131 PDF (1.119 MB)
Transient behaviour of the formation of primary dendrite arms p. C7-841 M. BALLIEL DOI: https://doi.org/10.1051/jp4:19937132 PDF (228.0 KB)
Complex processing of molten secondary aluminium p. C7-847 P. MOLDOVAN, I. CHIRA et M. PANA DOI: https://doi.org/10.1051/jp4:19937133 PDF (377.8 KB)
The buoyancy convection during directional solidification of AlZn eutectic p. C7-855 M. PRAZÁK, M. PROCIO et S. HOLECEK DOI: https://doi.org/10.1051/jp4:19937134 PDF (137.3 KB)
Invisible macrodefects in castings p. C7-861 J. CAMPBELL DOI: https://doi.org/10.1051/jp4:19937135 PDF (417.7 KB)
Transport phenomena and modelling in melting and refining processes p. C7-873 D. ABLITZER DOI: https://doi.org/10.1051/jp4:19937136 PDF (836.1 KB)
Plasma arc remelting of steels and nickel-based superalloys p. C7-883 N.C. SPARKS, J.M. YOUNG, L. SHAW et T.P. JOHNSON DOI: https://doi.org/10.1051/jp4:19937137 PDF (3.268 MB)
Critical assessment of a refractory metal dissolution experiment in inductive cold crucible p. C7-889 F. REVET, C. MÉNNÉTRIER et F. DURAND DOI: https://doi.org/10.1051/jp4:19937138 PDF (542.1 KB)
Plasma sprayed thermal barrier coatings for industrial gas turbines : morphology, processing and properties p. C7-903 H.W. GRÜNLING et W. MANNSMANN DOI: https://doi.org/10.1051/jp4:19937140 PDF (1.480 MB)
Erosion resistance and adhesion of composite metal/ceramic coatings produced by plasma spraying p. C7-913 D.A.J. RAMM, I.M. HUTCHINGS et T.W. CLYNE DOI: https://doi.org/10.1051/jp4:19937141 PDF (912.0 KB)
Determination of laser shock treatment conditions for fatigue testing of Ni-based superalloys p. C7-921 P. FORGET, M. JEANDIN et A. LYORET DOI: https://doi.org/10.1051/jp4:19937142 PDF (322.4 KB)
Mechanical properties and microstructure of laser treated Al-Cu-Mg alloys p. C7-927 J.Th.M. DE HOSSON et J. NOORDHUIS DOI: https://doi.org/10.1051/jp4:19937143 PDF (301.4 KB)
Hard coatings p. C7-933 J.P. DAN, H.J. BOVING et H.E. HINTERMANN DOI: https://doi.org/10.1051/jp4:19937144 PDF (391.2 KB)
Increased performance of bearings using TiC-coated balls p. C7-943 A. SAVAN, H.J. BOVING, F. FLUEHMANN et H.E. HINTERMANN DOI: https://doi.org/10.1051/jp4:19937145 PDF (293.0 KB)
Low temperature ion-nitriding of Fe-Mo-C sintered steels p. C7-949 A. MOLINARI, B. TESI, T. BACCI et G. PRADELLI DOI: https://doi.org/10.1051/jp4:19937146 PDF (1.485 MB)
Elaboration and TEM structural study of interfaces in composites produced by precipitation p. C7-955 J. DU, A. TRAVERSE, A. PEYROT, M. BACKHAUS-RICOULT et S. HAGÈGE DOI: https://doi.org/10.1051/jp4:19937147 PDF (2.088 MB)
How does silicon lead the kinetics of the galvanizing reaction to lose its solid-solid character p. C7-961 J. FOCT, G. REUMONT, G. DUPONT et P. PERROT DOI: https://doi.org/10.1051/jp4:19937148 PDF (326.4 KB)
Correlation between the wear behaviour and the mechanical properties of several surface treatments p. C7-967 L. LELAIT, A. LINA, R. REZAKHANLOU, J.C. VAN DUYSEN et J. VON STEBUT DOI: https://doi.org/10.1051/jp4:19937149 PDF (217.6 KB)
Plasma nitriding of Al 99.5 p. C7-971 H.-Y. CHEN, H.-R. STOCK et P. MAYR DOI: https://doi.org/10.1051/jp4:19937150 PDF (3.170 MB)
Characterization of oxyde films and conversion layers on aluminium alloys p. C7-981 J. DE LAET, G. GOEMINNE, H. TERRYN et J. VEREECKEN DOI: https://doi.org/10.1051/jp4:19937151 PDF (126.3 KB)
Excimer laser induced melting and decomposition of technical ceramic surfaces and their properties p. C7-987 J. GROSSMANN, A. EMMEL, E. SCHUBERT et H.W. BERGMANN DOI: https://doi.org/10.1051/jp4:19937152 PDF (1.861 MB)
Microstructural and electrochemical characterization of laser deposited 18-10 austenitic stainless steel clad layers p. C7-991 F. FOUQUET, P. SALLAMAND, J.P. MILLET, A. FRENK et J.D. WAGNIERE DOI: https://doi.org/10.1051/jp4:19937153 PDF (1.500 MB)
Microstructure characterization in electrodeposited Cu-coatings obtained at different bath temperatures p. C7-995 I. HANDREG, P. KLIMANEK et H. WEIDNER DOI: https://doi.org/10.1051/jp4:19937154 PDF (1.078 MB)
Aluminium based protective coatings produced on AISI 304 stainless steel p. C7-999 B. BREVAGLIERI, M. MONGELLI et S. NATALI DOI: https://doi.org/10.1051/jp4:19937155 PDF (850.2 KB)
Propriétés des couches de ZrO2 et de HfO2 obtenues par évaporation thermique réactive p. C7-1003 F. TCHELIEBOU, A. BOYER et J.P. CHERON DOI: https://doi.org/10.1051/jp4:19937156 PDF (157.0 KB)
Microstructure and interfaces of a reaction coating on aluminium alloys by laser processing p. C7-1007 X.B. ZHOU et J.Th.M. DE HOSSON DOI: https://doi.org/10.1051/jp4:19937157 PDF (1.545 MB)
Microstructure of yttria stabilized zirconia-hafnia plasma sprayed thermal barrier coatings p. C7-1013 H. IBÉGAZÈNE, S. ALPÉRINE et C. DIOT DOI: https://doi.org/10.1051/jp4:19937158 PDF (921.5 KB)
Assemblage métallurgique des pièces moteurs. Soudage par friction inertielle de disques de compresseur HP en superalliage de nickel p. C7-1019 J.-P. FERTE DOI: https://doi.org/10.1051/jp4:19937159 PDF (2.003 MB)
Electron beam welding and post-weld treatments of 2219-T6 p. C7-1029 S. TOSTO et F. NENCI DOI: https://doi.org/10.1051/jp4:19937160 PDF (1.448 MB)
Bonding of aluminium matrix composites for application in the transport industry p. C7-1037 A. UREÑA et J.M. GÓMEZ DE SALAZAR DOI: https://doi.org/10.1051/jp4:19937161 PDF (2.435 MB)
Ceramic to metal direct brazing p. C7-1043 F. MORET et N. EUSTATHOPOULOS DOI: https://doi.org/10.1051/jp4:19937162 PDF (1.014 MB)
Influence of heat treatment on the microstructure and properties of laser welds in 8090 p. C7-1053 I.R. WHITAKER, N.J. CALDER, D.G. McCARTNEY et W.M. STEEN DOI: https://doi.org/10.1051/jp4:19937163 PDF (2.313 MB)
Damages and cracks in ceramic/metal interfaces p. C7-1057 D. JUVE, P. LOURDIN, B. MBONGO, N. BOUKHEIT et D. TREHEUX DOI: https://doi.org/10.1051/jp4:19937164 PDF (588.2 KB)
Metal-ceramic joining by laser p. C7-1061 J.M. PELLETIER et M. ROBIN DOI: https://doi.org/10.1051/jp4:19937165 PDF (608.5 KB)
Failure in a composite resin-dentin adhesive bond p. C7-1065 B. REZGUI, H. ABDENNAGI, S. SAHTOUT et M.S. BELKHIR DOI: https://doi.org/10.1051/jp4:19937166 PDF (122.8 KB)
Stability and formation kinetics of TiN and silicides in the Ti/Si3N4 diffusion couple p. C7-1069 M. PAULASTO, F.J.J. VAN LOO et J.K. KIVILAHTI DOI: https://doi.org/10.1051/jp4:19937167 PDF (1.179 MB)
Comportement mécanique d'assemblages en acier 27CD4 et 100C6 soudés rapidement par soudage-diffusion-dynamique p. C7-1073 G. LE PAGE, M. HOURCADE et B. CRIQUI DOI: https://doi.org/10.1051/jp4:19937168 PDF (166.5 KB)
Interactions mécaniques et physico-chimiques aux interfaces de liaisons céramo-métalliques en fonction de la technique d'assemblage p. C7-1077 G. LASCAR DOI: https://doi.org/10.1051/jp4:19937169 PDF (984.9 KB)
Aspects of the transitory deformations correlated with the cracking at heat in welding p. C7-1087 V. MICLOSI, Gh. SOLOMON et I. TONOIU DOI: https://doi.org/10.1051/jp4:19937170 PDF (141.8 KB)
Diffusion bonding of hardmetals (WC-Co) with metallic interlayers p. C7-1093 J.M. GÓMEZ DE SALAZAR et A. UREÑA DOI: https://doi.org/10.1051/jp4:19937171 PDF (3.236 MB)
In-line metallurgical process control in the steel industry p. C7-1101 M. WANIN DOI: https://doi.org/10.1051/jp4:19937172 PDF (624.4 KB)
Paradigm shift in materials processing ; the intelligent processing revolution p. C7-1109 D. APELIAN DOI: https://doi.org/10.1051/jp4:19937173 PDF (347.4 KB)
Calculation of the microstructural evolution and of the mechanical properties for hot rolling of steels p. C7-1121 G. ZOUHAR, R. KOST et F. HIRSCHMANNER DOI: https://doi.org/10.1051/jp4:19937174 PDF (217.6 KB)
Application of numerical simulation in design and control of forming processes p. C7-1129 J. HUÉTINK et H.G. MOOI DOI: https://doi.org/10.1051/jp4:19937175 PDF (320.4 KB)
Determination of brazed joint constitutive law by inverse method p. C7-1135 G. LOVATO, F. MORET, P. LE GALLO, G. CAILLETAUD et P. PILVIN DOI: https://doi.org/10.1051/jp4:19937176 PDF (792.0 KB)
Modélisation de l'usinage formulée en Euler-Lagrange arbitraire p. C7-1141 P. JOYOT, R. RAKOTOMALALA et M. TOURATIER DOI: https://doi.org/10.1051/jp4:19937177 PDF (122.6 KB)
Computerized simulation of thermal behaviour during forging sequences p. C7-1145 S. HOLLARD et J.-L. NOYES DOI: https://doi.org/10.1051/jp4:19937178 PDF (474.7 KB)
Fluid flow and mass transfer in a vacuum induction melting furnace p. C7-1151 A. JARDY, D. GOSSET, D. ABLITZER et S. WITZKE DOI: https://doi.org/10.1051/jp4:19937179 PDF (282.4 KB)
Numerical simulation of heterogeneous phase transformations p. C7-1157 H. COMBEAU et J. LACAZE DOI: https://doi.org/10.1051/jp4:19937180 PDF (340.4 KB)
Numerical simulation of strain hardening and recrystallization in the hot forming processes p. C7-1163 M. PIETRZYK DOI: https://doi.org/10.1051/jp4:19937181 PDF (384.8 KB)
A finite element model for thermomechanical analysis in casting processes p. C7-1171 D. CELENTANO, S. OLLER et E. OÑATE DOI: https://doi.org/10.1051/jp4:19937182 PDF (346.3 KB)
Considerations on the interaction between the press structure and the tool in the deep drawing simulation p. C7-1181 G. BELINGARDI, A. CHIARA et M. FARIELLO DOI: https://doi.org/10.1051/jp4:19937183 PDF (1.393 MB)
Numerical analysis and design of industrial superplastic forming p. C7-1187 I. St. DOLTSINIS DOI: https://doi.org/10.1051/jp4:19937184 PDF (497.7 KB)
Numerical modelling of thermomechanical processes related to bulk forming operations p. C7-1199 M. SCHÖNAUER, T. RODIC et D.R.J. OWEN DOI: https://doi.org/10.1051/jp4:19937185 PDF (1.595 MB)
Computer investigations of the influences of magnets for magnetron-sputtering p. C7-1211 O. KNOTEK, F. LÖFFLER, U. SCHNAUT et W. GUAN DOI: https://doi.org/10.1051/jp4:19937186 PDF (739.5 KB)
Numerical optimization of the solidification conditions of monocrystals of the Fe-Cr-Ni alloys p. C7-1217 J. GLOWNIA et H. POLCIK DOI: https://doi.org/10.1051/jp4:19937187 PDF (223.5 KB)
Prévision de la réponse à la trempe des aciers en fonction de l'efficacité des fluides de trempe p. C7-1223 G. SCHANNE, G. KELLEN et C. WEIDER DOI: https://doi.org/10.1051/jp4:19937188 PDF (173.7 KB)
The mathematical model of the process of the dissolution of the solid particle in the liquid metal under the conducting of the electric current p. C7-1229 A.I. RAICHENKO, A.A. RAICHENKO et E.S. CHERNIKOVA DOI: https://doi.org/10.1051/jp4:19937189 PDF (159.1 KB)
The analysis of the electric heating of the WC-Co hard-alloy under consideration of the dependence of it's characteristics on the temperature p. C7-1235 A.I. RAICHENKO, E.S. CHERNIKOVA et E.A. OLEVSKY DOI: https://doi.org/10.1051/jp4:19937190 PDF (245.5 KB)
Computer-aided analysis of grain growth in metals p. C7-1241 P. KLIMANEK, Ch. MAY et H. RICHTER DOI: https://doi.org/10.1051/jp4:19937191 PDF (169.7 KB)
2-D modelling of longitudinal and radial segregations in vacuum arc remelting of titanium alloys p. C7-1245 C. MÉNNÉTRIER, A. JARDY et D. ABLITZER DOI: https://doi.org/10.1051/jp4:19937192 PDF (195.8 KB)
Synthesis and processing of nanoscaled ceramics by chemical routes p. C7-1251 H. SCHMIDT, R. NASS, M. ASLAN, K.-P SCHMITT, T. BENTHIEN et S. ALBAYRAK DOI: https://doi.org/10.1051/jp4:19937193 PDF (2.616 MB)
Mullite-alumina functionally gradient ceramics p. C7-1261 P. PENA, J. BARTOLOMÉ, J. REQUENA et J.S. MOYA DOI: https://doi.org/10.1051/jp4:19937194 PDF (1.550 MB)
Non-destructive characterization of refractories by mirage effect and photothermal microscopy p. C7-1267 G. SAVIGNAT, P. BOCH, L. POTTIER, D. VANDEMBROUCQ et D. FOURNIER DOI: https://doi.org/10.1051/jp4:19937195 PDF (663.0 KB)
Comparison of fracture toughness measuring methods applied on silicon nitride ceramics p. C7-1273 E. RUDNAYOVÁ, J. DUSZA et M. KUPKOVÁ DOI: https://doi.org/10.1051/jp4:19937196 PDF (912.5 KB)
The self-propagating high-temperature synthesis of sinterable powders p. C7-1277 R. PAMPUCH DOI: https://doi.org/10.1051/jp4:19937197 PDF (469.3 KB)
Ceramic and metal-ceramic nanostructures obtained by reactive ball milling p. C7-1287 J. SECONDI et R. YAVARI DOI: https://doi.org/10.1051/jp4:19937198 PDF (1.350 MB)
Silicon carbonitrides - A novel class of materials p. C7-1293 H. SCHÖNFELDER, F. ALDINGER et R. RIEDEL DOI: https://doi.org/10.1051/jp4:19937199 PDF (1.025 MB)
Synthesis of poly(dimethylsilylene-co-diphenylsilylene) polymers as precursors for SiC ceramics p. C7-1299 S.M. BUSHNELL-WATSON, R.J.P. EMSLEY, M.J. MORRIS et J.H. SHARP DOI: https://doi.org/10.1051/jp4:19937200 PDF (342.4 KB)
Crystallization and densification of plasma H.F synthetized boron powder p. C7-1305 J.L. BOULANGER et D. AUTISSIER DOI: https://doi.org/10.1051/jp4:19937201 PDF (148.4 KB)
Preparation of alumina-chromium composites by reactive hot-pressing A1 + Cr2O3 based powders p. C7-1311 D. OSSO, A. MOCELLIN, G. LE CAER et A. PIANELLI DOI: https://doi.org/10.1051/jp4:19937202 PDF (599.6 KB)
Ceramic/metal joining for structures and materials p. C7-1317 A.P. TOMSIA DOI: https://doi.org/10.1051/jp4:19937203 PDF (3.022 MB)
Processing, reaction mechanisms and properties of oxidation-formed Al2O3-matrix composites p. C7-1327 N. CLAUSSEN DOI: https://doi.org/10.1051/jp4:19937204 PDF (473.8 KB)
Sintering and yttrium grain boundary segregation in sub-micron grain size alumina p. C7-1335 E. SATO et C. CARRY DOI: https://doi.org/10.1051/jp4:19937205 PDF (272.7 KB)
Possibilities of special cements in ceramic applications p. C7-1341 A. CAPMAS et T.A. BIER DOI: https://doi.org/10.1051/jp4:19937206 PDF (214.5 KB)
Molecular design of hybrid organic-inorganic materials p. C7-1349 C. SANCHEZ et F. RIBOT DOI: https://doi.org/10.1051/jp4:19937207 PDF (298.9 KB)
Modelling of glass melting industrial process p. C7-1357 M.G. CARVALHO et M. NOGUEIRA DOI: https://doi.org/10.1051/jp4:19937208 PDF (590.7 KB)
Optical coatings for glazings p. C7-1367 C.G. GRANQVIST DOI: https://doi.org/10.1051/jp4:19937209 PDF (466.6 KB)
Carbon coatings on optical fibres by PECVD p. C7-1377 V. VERBRUGGE, L. SEGERS, R. WINAND, M.N. CHARASSE, C. QUINTY et J.P. LE PESANT DOI: https://doi.org/10.1051/jp4:19937210 PDF (953.1 KB)
Bonding between metals and multicomponent phosphate based ceramic - glass. Application to the enamelling of nickel and titanium p. C7-1383 P. VAST DOI: https://doi.org/10.1051/jp4:19937211 PDF (815.0 KB)
Morphological investigation of ceramics for capacitors p. C7-1389 M. PROD'HOMME, M. COSTER et J.-L. CHERMANT DOI: https://doi.org/10.1051/jp4:19937212 PDF (641.4 KB)
Influence of Si3N4 interface chemistry on both grain morphology and fracture resistance p. C7-1393 H.-J. KLEEBE, E. MEISSNER et G. ZIEGLER DOI: https://doi.org/10.1051/jp4:19937213 PDF (892.1 KB)
Photothermal characterization of refractories for the steel industry p. C7-1399 G. SAVIGNAT, F. QUEYROUX, J. POIRIER et G. PROVOST DOI: https://doi.org/10.1051/jp4:19937214 PDF (165.3 KB)
Low-shrinkage refractories bonded with high-alumina cement mixed with colloidal silica p. C7-1403 N. RICHARD, N. LEQUEUX et P. BOCH DOI: https://doi.org/10.1051/jp4:19937215 PDF (181.3 KB)
Synthesis of alumina-metal nanocomposites by mechanical alloying p. C7-1407 D. OSSO, G. LE CAER, S. BEGIN-COLIN, A. MOCELLIN et P. MATTEAZZI DOI: https://doi.org/10.1051/jp4:19937216 PDF (658.6 KB)
EXAFS study of zirconia precursors p. C7-1413 C. LANDRON, J.C. RIFFLET, P. ODIER et D. BAZIN DOI: https://doi.org/10.1051/jp4:19937217 PDF (182.9 KB)
Intergranular film analyses in α-SiC sintered with Al-additives p. C7-1417 M.-L. DUVAL-RIVIERE et J. VICENS DOI: https://doi.org/10.1051/jp4:19937218 PDF (1.402 MB)
Sintering behaviour of CeO2-Gd2O3 powders prepared by the oxalate coprecipitation method p. C7-1421 P. DURAN, J.R. JURADO et C. MOURE DOI: https://doi.org/10.1051/jp4:19937219 PDF (1.254 MB)
Synthesis and properties of nanocrystalline compounds prepared by high-energy milling p. C7-1425 B.F. KIEBACK, H. KUBSCH et A. BUNKE DOI: https://doi.org/10.1051/jp4:19937220 PDF (133.2 KB)
Structural and high temperature electrical properties of Lay-xSrxMnO3 perovskite materials p. C7-1429 E. SYSKAKIS, B. ROBENS et A. NAOUMIDIS DOI: https://doi.org/10.1051/jp4:19937221 PDF (275.3 KB)
Structural study of calcium phosphate ceramics by convergent beam electron diffraction (CBED) p. C7-1435 E.F. BRÈS, R. VINCENT, J.-P. MORNIROLI et G. POURROY DOI: https://doi.org/10.1051/jp4:19937222 PDF (989.0 KB)
Investigation of Vycor glass structure on the double-bent-crystal small-angle neutron scattering instrument p. C7-1439 P. STRUNZ, P. LUKÁS, J. SAROUN, P. MIKULA, G. ALBERTINI, G. CICOGNANI et M. STEFANON DOI: https://doi.org/10.1051/jp4:19937223 PDF (212.8 KB)
In situ formation of CA6 platelets in Al2O3 and Al2O3/ZrO2 matrices p. C7-1443 M. BELMONTE, A.J. SÁNCHEZ-HERENCIA, R. MORENO, P. MIRANZO, J.S. MOYA et A.P. TOMSIA DOI: https://doi.org/10.1051/jp4:19937224 PDF (1.493 MB)
Physical properties of MgO partially stabilized ZrO2 films deposited by coevaporation p. C7-1449 F. TCHELIEBOU, A. BOYER et E. CHARLES DOI: https://doi.org/10.1051/jp4:19937225 PDF (147.0 KB)
Characterization of grain boundary misorientations in a alumina by large angle convergent beam electron diffraction p. C7-1455 J.P. MORNIROLI, A. LECLERE, W. SWIATNICKI et J.Y. LAVAL DOI: https://doi.org/10.1051/jp4:19937226 PDF (1.304 MB)
Processing of submicron a-alumina powders doped with Mg-physical and chemical characterization p. C7-1459 M. FILAL, D. MONCEAU, G. PETOT-ERVAS, C. PETOT et J.G. ZAO DOI: https://doi.org/10.1051/jp4:19937227 PDF (115.8 KB)
Influence of the dopants and of the microstructure on the ionic conductivity of zirconia p. C7-1463 M. FILAL, C. PETOT, G. PETOT-ERVAS, M.C. AMAMRA, J.L. CARPENTIER et J.L. DELLIS DOI: https://doi.org/10.1051/jp4:19937228 PDF (132.5 KB)
Kinetic demixing of (Co, Mg)O and ZrO2, Y2O3 solid solutions in an electrical field p. C7-1467 M. FILAL, M. TEDTOUB, D. MONCEAU, G. PETOT-ERVAS et C. PETOT DOI: https://doi.org/10.1051/jp4:19937229 PDF (110.8 KB)
Elaboration and sintering behavior of a laminar ceramic-ceramic material p. C7-1471 P. LETULLIER et J.M. HEINTZ DOI: https://doi.org/10.1051/jp4:19937230 PDF (202.0 KB)
Grain growth and Ostwald ripening in chromia-doped uranium dioxide p. C7-1477 V. PERES, L. BOURGEOIS et P. DEHAUDT DOI: https://doi.org/10.1051/jp4:19937231 PDF (519.4 KB)
Nanosized Si/C/N composite powders formed by laser-aerosol coupling p. C7-1481 N. HERLIN, O. CROIX, M. CAUCHETIER, M. LUCE et E. MUSSET DOI: https://doi.org/10.1051/jp4:19937232 PDF (522.2 KB)
Investigation of the mechanical properties of silica glasses by indentation tests p. C7-1485 A. JUHÁSZ, G. VÖRÖS, P. TASNÁDI, I. KOVÁCS, I. SOMOGYI et J. SZÖLLÖSI DOI: https://doi.org/10.1051/jp4:19937233 PDF (719.4 KB)
Tendances de recherche dans le domaine des adhésifs à haute performance p. C7-1493 G. RABILLOUD et B. SILLION DOI: https://doi.org/10.1051/jp4:19937234 PDF (400.6 KB)
Effects of the composition of hot-melt adhesives on their bulk and interfacial properties p. C7-1505 M. NARDIN, M. BROGLY et J. SCHULTZ DOI: https://doi.org/10.1051/jp4:19937235 PDF (267.9 KB)
Current theories of adhesion and their relevance to adhesive technology p. C7-1511 K.W. ALLEN DOI: https://doi.org/10.1051/jp4:19937236 PDF (234.2 KB)
Organic microcomposites via reactive processing p. C7-1519 R. MÜLHAUPT, J. RÖSCH et S. DEMHARTER DOI: https://doi.org/10.1051/jp4:19937237 PDF (299.5 KB)
Linear viscoelasticity of incompatible polymer blends in the melt in relation with interfacial properties p. C7-1525 D. GRAEBLING, R. MULLER et J.F. PALIERNE DOI: https://doi.org/10.1051/jp4:19937238 PDF (335.2 KB)
Influence of reprocessing on the properties of advanced polymers p. C7-1535 J. NAZÁBAL ECHEBERRÍA DOI: https://doi.org/10.1051/jp4:19937239 PDF (78.09 KB)
Combustion and fire retardance in polymeric materials p. C7-1539 G. CAMINO, M.P. LUDA et L. COSTA DOI: https://doi.org/10.1051/jp4:19937240 PDF (181.4 KB)
Recycling of polymers by pyrolysis p. C7-1543 W. KAMINSKY DOI: https://doi.org/10.1051/jp4:19937241 PDF (392.8 KB)
Fracture surface energy and craze fibril stress in PMMA in water p. C7-1553 R. SCHIRRER, L. JOSSERAND et P. DAVIES DOI: https://doi.org/10.1051/jp4:19937242 PDF (835.2 KB)
Behaviour of thermoplastic polymers during explosive decompressions in a petroleum environment p. C7-1559 B. DEWIMILLE, J. MARTIN et J. JARRIN DOI: https://doi.org/10.1051/jp4:19937243 PDF (1.253 MB)
Transport properties of conducting polythiophene-polystyrene composites p. C7-1565 F. SAMIR, M. MORSLI, A. BONNET, A. CONAN et S. LEFRANT DOI: https://doi.org/10.1051/jp4:19937244 PDF (123.1 KB)
Structure of doped polyaniline - dielectric spectroscopy measurements p. C7-1569 R. DIAZ CALLEJA et E.S. MATVEEVA DOI: https://doi.org/10.1051/jp4:19937245 PDF (180.9 KB)
Compaction isostatique d'un explosif agrégataire p. C7-1573 D. PICART et P. GILORMINI DOI: https://doi.org/10.1051/jp4:19937246 PDF (613.9 KB)
Morphology development during polymer blending p. C7-1577 A. LUCIANI, J. JARRIN et B. DEWIMILLE DOI: https://doi.org/10.1051/jp4:19937247 PDF (119.4 KB)
New polymer materials - new prospects p. C7-1581 A.N. LACHINOV, A.Yu. ZHEREBOV, V.M. KORNILOV et M.G. ZOLOTUKHIN DOI: https://doi.org/10.1051/jp4:19937248 PDF (178.5 KB)
Electron-microscopic analysis of polymer switching thin films p. C7-1585 V.M. KORNILOV et A.N. LACHINOV DOI: https://doi.org/10.1051/jp4:19937249 PDF (733.0 KB)
Selecting the components of composites p. C7-1595 M.F. ASHBY DOI: https://doi.org/10.1051/jp4:19937250 PDF (636.6 KB)
Prediction of failure probability of large unidirectional fibre reinforced composites p. C7-1601 M. LIENKAMP et H.-E. EXNER DOI: https://doi.org/10.1051/jp4:19937251 PDF (744.7 KB)
Interfaces and interfacial mechanics : influence on the mechanical behavior of ceramic matrix composites (CMC) p. C7-1607 J. LAMON DOI: https://doi.org/10.1051/jp4:19937252 PDF (362.0 KB)
A micro-macro relationship for modeling the damage of discontinuous reinforced composites p. C7-1617 N. BOURGEOIS, M. KEYVANI et D. BAPTISTE DOI: https://doi.org/10.1051/jp4:19937253 PDF (298.0 KB)
Homogenization in thermoelasticity : application to composite materials p. C7-1623 R. PEYROUX et C. LICHT DOI: https://doi.org/10.1051/jp4:19937254 PDF (152.6 KB)
Damage monitoring in polymer matrix structures p. C7-1629 K. SCHULTE DOI: https://doi.org/10.1051/jp4:19937255 PDF (328.5 KB)
Analytical micromechanical models for the prediction of multiple cracking in composites p. C7-1637 L.N. McCARTNEY DOI: https://doi.org/10.1051/jp4:19937256 PDF (445.1 KB)
Modelling of the preheating process of filament tows p. C7-1647 B. LAUKE, A. SCHÖNE et K. FRIEDRICH DOI: https://doi.org/10.1051/jp4:19937257 PDF (144.7 KB)
Fatigue damage mechanism and strength of woven laminates p. C7-1651 J. XIAO et C. BATHIAS DOI: https://doi.org/10.1051/jp4:19937258 PDF (330.8 KB)
Effects of temperature on monotonic and fatigue properties of carbon fibre epoxy cross ply laminates p. C7-1657 Y. MATSUHISA et J.E. KING DOI: https://doi.org/10.1051/jp4:19937259 PDF (177.6 KB)
Interface characterization by pull-out test between high modulus polyethylene fibre and an unsaturated polyester resin p. C7-1661 P. MASSE, J.P. CAVROT, P. FRANCOIS, J.M. LEFEBVRE et B. ESCAIG DOI: https://doi.org/10.1051/jp4:19937260 PDF (142.1 KB)
Stress corrosion of GRP tensile strength members in optical fibre cables p. C7-1665 R. LEETHAM et S.N. KUKUREKA DOI: https://doi.org/10.1051/jp4:19937261 PDF (219.8 KB)
The influences of contamination during lamination on the properties of composite materials p. C7-1669 G.M. HALL BENG et S.E. MASON DOI: https://doi.org/10.1051/jp4:19937262 PDF (169.0 KB)
Processing and properties of metal matrix composites reinforced with continuous fibres for the control of thermal expansion, creep resistance and fracture toughness p. C7-1675 F. DELANNAY, C. COLIN, Y. MARCHAL, L. TAO, F. BOLAND, P. COBZARU, B. LIPS et M.-A. DELLIS DOI: https://doi.org/10.1051/jp4:19937263 PDF (3.033 MB)
Fabrication of Ti/SiCf metal matrix composites by vacuum plasma spraying p. C7-1685 Y.Y. ZHAO, P.S. GRANT et B. CANTOR DOI: https://doi.org/10.1051/jp4:19937264 PDF (1.690 MB)
Interphases and mechanical properties in carbon fibres/Al matrix composites p. C7-1693 O. PEREZ, G. PATRIARCHE, M. LANCIN et M.H. VIDAL-SÉTIF DOI: https://doi.org/10.1051/jp4:19937265 PDF (3.341 MB)
Modelling of high temperature interfacial reactions in continuously reinforced Ti/SiC metal matrix composites (MMCs) p. C7-1699 K.M. FOX DOI: https://doi.org/10.1051/jp4:19937266 PDF (270.2 KB)
Thermomechanical behaviour and finite element modelling of metal matrix composites p. C7-1705 N. HANSEN, D. JUUL JENSEN, Y.-L. LIU et N.J. SØRENSEN DOI: https://doi.org/10.1051/jp4:19937267 PDF (964.8 KB)
Process optimisation in the semi-solid forming of hypereutectic Al/Si MMCs p. C7-1711 P.J. WARD, H.V. ATKINSON, D.H. KIRKWOOD et C.M. SELLARS DOI: https://doi.org/10.1051/jp4:19937268 PDF (2.685 MB)
Interface studies in a Ti-6Al-4V/sigma fiber composite p. C7-1717 D. UPADHYAYA, M.A. BAKER, C.M. WARD-CLOSE, P. TSAKIROPOULOS et F.H. FROES DOI: https://doi.org/10.1051/jp4:19937269 PDF (3.637 MB)
Interfacial reactivity in aluminium/carbon fibre composites p. C7-1723 S. MERCIER, P. EHRBURGER et J. LAHAYE DOI: https://doi.org/10.1051/jp4:19937270 PDF (152.9 KB)
Rolling textures of a Cu-20% Nb composite p. C7-1727 D. RAABE et G. GOTTSTEIN DOI: https://doi.org/10.1051/jp4:19937271 PDF (166.2 KB)
A new method of making metal matrix fibre reinforced materials p. C7-1731 J. SCHAUPP et R. PRÜMMER DOI: https://doi.org/10.1051/jp4:19937272 PDF (1.949 MB)
High strength-high conductivity fibre-reinforced copper alloys p. C7-1737 C. BISELLI et D.G. MORRIS DOI: https://doi.org/10.1051/jp4:19937273 PDF (872.7 KB)
Microstructural characterization of a silicon carbide whisker reinforced 2014 aluminum metal matrix composite p. C7-1741 E. QUADRINI DOI: https://doi.org/10.1051/jp4:19937274 PDF (127.7 KB)
AlCu-Al2O3 metal matrix composites studied by thermoelectric power measurements p. C7-1745 L. PARRINI et R. SCHALLER DOI: https://doi.org/10.1051/jp4:19937275 PDF (164.2 KB)
Stainless steel fibre reinforced aluminium matrix composites processed by squeeze casting : relationship between processing conditions and interfacial microstructure p. C7-1749 C. COLIN, Y. MARCHAL, F. BOLAND et F. DELANNAY DOI: https://doi.org/10.1051/jp4:19937276 PDF (877.2 KB)
Effect of V and Re additions on the creep properties of γ/γ-α eutectic composites p. C7-1753 J. LAPIN, L. RYELANDT et F. DELANNAY DOI: https://doi.org/10.1051/jp4:19937277 PDF (821.6 KB)
Age-hardening characteristics of δ-alumina fibre reinforced aluminium-silicon LM-13 alloy metal matrix composites p. C7-1757 H. AKBULUT, M. DURMAN et F. YILMAZ DOI: https://doi.org/10.1051/jp4:19937278 PDF (1.589 MB)
Influence of composition and distribution of the reinforcing particles on fatigue properties of metal matrix composites p. C7-1763 E. HOCHREITER et F. JEGLITSCH DOI: https://doi.org/10.1051/jp4:19937279 PDF (3.846 MB)
Microstructure and mechanical properties of pressureless sintered alumina-silver composites p. C7-1769 J. WANG, C.B. PONTON et P.M. MARQUIS DOI: https://doi.org/10.1051/jp4:19937280 PDF (2.087 MB)
Short carbon fiber-aluminium matrix composite material prepared by extrusion of powder mixtures p. C7-1775 E SIMANCIK, G. JANGG et H.P. DEGISCHER DOI: https://doi.org/10.1051/jp4:19937281 PDF (1.880 MB)
Sintering by infiltration of loose mixture of powders, a method for metal matrix composite elaboration p. C7-1781 V. CONSTANTINESCU, R. ORBAN et H. COLAN DOI: https://doi.org/10.1051/jp4:19937282 PDF (1.812 MB)
Powder metallurgical processing of a SiC particle reinforced Al-6wt.%Fe alloy p. C7-1787 G. STANIEK, F. LEHNERT, M. PETERS, W. BUNK et W.A. KAYSSER DOI: https://doi.org/10.1051/jp4:19937283 PDF (1.664 MB)
Failure micromechanisms in particulate-reinforced metal-matrix composites p. C7-1793 J. LLORCA DOI: https://doi.org/10.1051/jp4:19937284 PDF (2.588 MB)
Cooper-graphite composite material for application to sliding electrical contacts p. C7-1799 S. EMMER, J. BIELEK et A. HAVALDA DOI: https://doi.org/10.1051/jp4:19937285 PDF (3.940 MB)
Structure et propriétés de la matrice des composites WC-W-Ni-Cu-Zn-Si renforcés avec des diamants synthétiques p. C7-1805 H. COLAN, V. CONSTANTINESCU et R. ORBAN DOI: https://doi.org/10.1051/jp4:19937286 PDF (2.524 MB)
The influence of solidification rate on structure parameters of aluminium-matrix particulate composites p. C7-1811 P. MOLDOVAN, C. ALEXANDRU, N. PANAIT, G. POPESCU, D. CONDEIU, C. BALESCU et G.V. GHICA DOI: https://doi.org/10.1051/jp4:19937287 PDF (1.711 MB)
Influence of cold rolling and fatigue on the residual stress state of a metal matrix composite p. C7-1817 E. HANUS, T. ERICSSON, J. LU et F. DECOMPS DOI: https://doi.org/10.1051/jp4:19937288 PDF (204.6 KB)
Powder metallurgy route in production of aluminium alloy matrix particulate composites p. C7-1821 A. AL-RASHED, S. HOLECEK, M. PRAZÁK et M. PROCIO DOI: https://doi.org/10.1051/jp4:19937289 PDF (122.1 KB)
Solidification kinetics of the particulate metal matrix composite p. C7-1825 Z. KONOPKA et J. BRASZCZYNSKI DOI: https://doi.org/10.1051/jp4:19937290 PDF (684.9 KB)
Preparing particle reinforced Al-MMCs by mechanical alloying p. C7-1829 E. HOCHREITER, C. KOWANDA et B. ORTNER DOI: https://doi.org/10.1051/jp4:19937291 PDF (1.721 MB)
Production of metal matrix composites ingots from semisolid alloys p. C7-1833 Ch. VIVÈS DOI: https://doi.org/10.1051/jp4:19937292 PDF (179.3 KB)
The role of rare earths additions to aluminium-matrix composites p. C7-1837 P. MOLDOVAN, C. ALEXANDRU, G. POPESCU, D. CONDEIU et G.V. GHICA DOI: https://doi.org/10.1051/jp4:19937293 PDF (1.635 MB)
Early stages of sliding wear behaviour of Al2O3 and SiC reinforced aluminium p. C7-1845 F. BONOLLO, L. CESCHINI, G.L. GARAGNANI, G. PALOMBARINI, I. TANGERINI et A. ZAMBON DOI: https://doi.org/10.1051/jp4:19937294 PDF (1.204 MB)
Microplasticity of MMC. Experimental results and modelling p. C7-1849 E. MAIRE, G. LORMAND, P.F. GOBIN et R. FOUGERES DOI: https://doi.org/10.1051/jp4:19937295 PDF (198.8 KB)
Metal/metal composites manufacturing under pressure p. C7-1853 Ph. VAILLANT et J.P. PETITET DOI: https://doi.org/10.1051/jp4:19937296 PDF (1.688 MB)
X-ray microtomography of damage in particle-reinforced metal matrix composites p. C7-1857 P.M. MUMMERY, B. DERBY, P. ANDERSON, G. DAVIS et J.C. ELLIOTT DOI: https://doi.org/10.1051/jp4:19937297 PDF (668.0 KB)
Microstructure and fracture behaviour of SiCp/Al-2618 metal matrix composite p. C7-1861 Y. ZONG et B. DERBY DOI: https://doi.org/10.1051/jp4:19937298 PDF (1.064 MB)
Etude du comportement et de l'endommagement des composites à matrice aluminium et à renforts particulaires p. C7-1867 M. ROGER, J. LU, D. LAI et H.P. LIEURADE DOI: https://doi.org/10.1051/jp4:19937299 PDF (222.9 KB)
The modelling and control of failure in bi-material ceramic laminates p. C7-1875 A.J. PHILLIPPS, S.J. HOWARD, W.J. CLEGG et T.W. CLYNE DOI: https://doi.org/10.1051/jp4:19937300 PDF (330.0 KB)
Thermal fatigue of fibrous ceramic matrix composites p. C7-1883 M.L. BOUCHETOU, M. HUGER et C. GAULT DOI: https://doi.org/10.1051/jp4:19937301 PDF (301.1 KB)
Microstructural design of platelet reinforced ceramics p. C7-1889 W. POMPE et D.S. WILKINSON DOI: https://doi.org/10.1051/jp4:19937302 PDF (793.9 KB)
Carbon-carbon composites : oxidation behavior and coatings protection p. C7-1895 M.P. BACOS DOI: https://doi.org/10.1051/jp4:19937303 PDF (2.198 MB)
Structure, composition and function of interfaces in ceramic fibre/matrix composites p. C7-1905 E. PIPPEL DOI: https://doi.org/10.1051/jp4:19937304 PDF (2.172 MB)
Integrity control for high temperature structural applications p. C7-1911 W. BECKER, W. KERFIN, A. PRADIER, U. TRABANDT et W.D. VOGEL DOI: https://doi.org/10.1051/jp4:19937305 PDF (845.9 KB)
Steady state creep behavior of two ceramic composites SiCf-SiC and SiCf -MLAS p. C7-1917 D. KERVADEC, F. ABBE et J.-L. CHERMANT DOI: https://doi.org/10.1051/jp4:19937306 PDF (1.921 MB)
The fracture behaviour of SiC reinforced SiAlYON ceramic matrix composites p. C7-1923 E. KASPRZAK et Y. BARBAUX DOI: https://doi.org/10.1051/jp4:19937307 PDF (201.0 KB)
Corrosion of ceramic matrix composites p. C7-1927 T. SCANU et Ph. COLOMBAN DOI: https://doi.org/10.1051/jp4:19937308 PDF (1.723 MB)
High temperature creep performance and microstructure of SiC-C-SiC composites p. C7-1931 N. MOZDZIERZ et M. BACKHAUS-RICOULT DOI: https://doi.org/10.1051/jp4:19937309 PDF (2.191 MB)
Carbon-free sliding interface in sol-gel processed SiC Nicalon fiber-refractory oxyde matrix composites p. C7-1937 E. BRUNETON, Ph. COLOMBAN et D. MICHEL DOI: https://doi.org/10.1051/jp4:19937310 PDF (2.504 MB)
Origin of the carbon rich sliding interface in alkali containing matrix-SiC Nicalon fibre composites p. C7-1941 E. MOUCHON et Ph. COLOMBAN DOI: https://doi.org/10.1051/jp4:19937311 PDF (828.2 KB)
First principles thermodynamics of alloys p. C7-1947 F. DUCASTELLE DOI: https://doi.org/10.1051/jp4:19937312 PDF (318.4 KB)
First principles simulations p. C7-1955 M. PALUMMO, L. REINING et P. BALLONE DOI: https://doi.org/10.1051/jp4:19937313 PDF (571.5 KB)
Alkali clusters : beyond the jellium sphere p. C7-1965 LI. SERRA, G.B. BACHELET, N.V. GIAI et E. LIPPARINI DOI: https://doi.org/10.1051/jp4:19937314 PDF (190.7 KB)
Thermodynamic calculations of stannic oxide surfaces p. C7-1971 P.A. MULHERAN et J.H. HARDING DOI: https://doi.org/10.1051/jp4:19937315 PDF (117.2 KB)
Steady-states and microstructural evolutions in driven systems p. C7-1977 P. BELLON, F. SOISSON et G. MARTIN DOI: https://doi.org/10.1051/jp4:19937316 PDF (157.9 KB)
Recent advances in computer modelling of granular systems p. C7-1981 R. JULLIEN, P. MEAKIN et A. PAVLOVITCH DOI: https://doi.org/10.1051/jp4:19937317 PDF (853.1 KB)
Search for positron localization near transition-metal solutes of negative effective charge in Ni and Cu p. C7-1987 D.M. HUNTER, R.I. GRYNSZPAN et A.S. ARROTT DOI: https://doi.org/10.1051/jp4:19937318 PDF (320.5 KB)
Propagative modes of plastic deformation p. C7-1995 P. HÄHNER et M. ZAISER DOI: https://doi.org/10.1051/jp4:19937319 PDF (512.6 KB)
Dislocation dynamics and multiplication via atomistic simulations p. C7-2005 P.C. CLAPP, M.V. GLAZOV et J.A. RIFKIN DOI: https://doi.org/10.1051/jp4:19937320 PDF (439.3 KB)
Plasticity of the spinodally decomposing Ni-11.8 at.% Ti alloy p. C7-2015 M. LAMBRIGGER DOI: https://doi.org/10.1051/jp4:19937321 PDF (1.152 MB)
Grain boundary diffusion and motion associated with precipitation and dissolution in metallic systems p. C7-2021 G. SOLÓRZANO DOI: https://doi.org/10.1051/jp4:19937322 PDF (3.215 MB)
Deformation banding and its influence on deformation textures formation p. C7-2027 C.S. LEE, B.J. DUGGAN et R.E. SMALLMAN DOI: https://doi.org/10.1051/jp4:19937323 PDF (1.130 MB)
The basal plane oxygen dependence of YBa2Cu3O7-x anelastic relaxation and orthorhombic to tetragonal phase transition p. C7-2033 E. BONETTI, G.P. CAMMAROTA, E.G. CAMPARI et A. CASAGRANDE DOI: https://doi.org/10.1051/jp4:19937324 PDF (291.8 KB)
Analysis of the precipitation mechanisms of partially coherent precipitates in the 15-5 PH alloy p. C7-2039 H.R. HABIBIBAJGUIRANI, C. SERVANT et G. CIZERON DOI: https://doi.org/10.1051/jp4:19937325 PDF (1.382 MB)
The formation of cube volumes in cold rolled fcc metals p. C7-2043 C.S. LEE, R.E. SMALLMAN et B.J. DUGGAN DOI: https://doi.org/10.1051/jp4:19937326 PDF (192.2 KB)
Statistical thermodynamics of ordering systems p. C7-2047 L. NOBILI, A. DEL PRETE, U. DUCATI et P.L. CAVALLOTTI DOI: https://doi.org/10.1051/jp4:19937327 PDF (199.8 KB)
L12DO22 competition in the pseudo binary (Pt, Rh)3Vand (Pd, Rh)3V alloys p. C7-2051 A. LOISEAU et E. CABET DOI: https://doi.org/10.1051/jp4:19937328 PDF (2.585 MB)
Thermodynamical behaviour of domain walls in ordered alloys : an experimental study by transmission electron microscopy p. C7-2057 A. LOISEAU, C. RICOLLEAU et E. CABET DOI: https://doi.org/10.1051/jp4:19937329 PDF (4.253 MB)
Holography and transmission electron microscopy p. C7-2063 G. MATTEUCCI, G. POZZI et A. TONOMURA DOI: https://doi.org/10.1051/jp4:19937330 PDF (1.314 MB)
Scanning transmission electron microscopy p. C7-2073 L.M. BROWN DOI: https://doi.org/10.1051/jp4:19937331 PDF (866.9 KB)
Electron energy-loss spectroscopy (EELS) ; comparison with X-ray analysis p. C7-2083 H. MÜLLEJANS et J. BRULEY DOI: https://doi.org/10.1051/jp4:19937332 PDF (562.0 KB)
EELS in the TEM : nanometer resolution without a nanoprobe p. C7-2093 P. SCHATTSCHNEIDER, C. TISCHLER et H. BANGERT DOI: https://doi.org/10.1051/jp4:19937333 PDF (569.0 KB)
Recent developments in X-ray projection microscopy and X-ray microtomography applied to materials science p. C7-2099 J. CAZAUX, D. ERRE, D. MOUZE, J.M. PATAT, S. RONDOT, A. SASOV, P. TREBBIA et A. ZOLFAGHARI DOI: https://doi.org/10.1051/jp4:19937334 PDF (1.951 MB)
Atom-probe study Ti Al based alloy p. C7-2105 A. HUGUET, A. MENAND, A. DENQUIN et S. NAKA DOI: https://doi.org/10.1051/jp4:19937335 PDF (708.6 KB)
Convergent beam electron diffraction p. C7-2113 D. CHERNS DOI: https://doi.org/10.1051/jp4:19937336 PDF (4.437 MB)
In situ straining experiments in the transmission electron microscope p. C7-2123 U. MESSERSCHMIDT DOI: https://doi.org/10.1051/jp4:19937337 PDF (2.260 MB)
Some application of synchrotron radiation p. C7-2129 H. FUESS DOI: https://doi.org/10.1051/jp4:19937338 PDF (266.7 KB)
Local texture measurements with the scanning electron microscope p. C7-2137 G. GOTTSTEIN et O. ENGLER DOI: https://doi.org/10.1051/jp4:19937339 PDF (1.554 MB)
Substructure analysis by means of neutron diffraction p. C7-2143 P. KLIMANEK, T. KSCHIDOCK, P. LUKAS, P. MIKULA, A. MÜCKLICH et M. VRANA DOI: https://doi.org/10.1051/jp4:19937340 PDF (249.1 KB)
X-ray diffraction analysis of substructures in plastically deformed BCC materials p. C7-2149 P. KLIMANEK DOI: https://doi.org/10.1051/jp4:19937341 PDF (232.1 KB)
Multivariate ALCHEMI in the presence of anti-site defects p. C7-2155 M.G. WALLS DOI: https://doi.org/10.1051/jp4:19937342 PDF (196.5 KB)
Nuclear analytical techniques and applications to materials processing p. C7-2159 G. BLONDIAUX et J.L. DEBRUN DOI: https://doi.org/10.1051/jp4:19937343 PDF (172.0 KB)
Characterization of dislocations in anisotropic materials by large angle convergent beam electron diffraction p. C7-2165 J.P. MORNIROLI et P. VERMAUT DOI: https://doi.org/10.1051/jp4:19937344 PDF (2.332 MB)
Auger electron microprobe analysis of the first steps of a Ni-20 Cr alloy oxidation p. C7-2169 J.E SCHMITT, P. PIGEAT et B. WEBER DOI: https://doi.org/10.1051/jp4:19937345 PDF (204.8 KB)
Characterization of thin films using generalized lamb wave dispersion relations p. C7-2173 P. RICHARD, O. BEHREND, G. GREMAUD et A. KULIK DOI: https://doi.org/10.1051/jp4:19937346 PDF (173.3 KB)
Phase transition behaviour and corrosion resistance of Nd2.5Fe13CoC1.425B0.075 and related compounds p. C7-2179 Ch. HELLWIG DOI: https://doi.org/10.1051/jp4:19937347 PDF (147.8 KB)
Advanced neutron diffraction techniques for strain measurements in polycrystalline materials p. C7-2183 P. MIKULA, P. LUKÁS, M. VRÁNA, P. KLIMANEK, T. KSCHIDOCK, K. MACEK, J. JANOVEC, J.C. OSBORN et G.M. SWALLOWE DOI: https://doi.org/10.1051/jp4:19937348 PDF (250.7 KB)
Crystallization study of amorphous Mn1-xCx films prepared by RF magnetron sputtering p. C7-2189 A. AOUNI et E. BAUER-GROSSE DOI: https://doi.org/10.1051/jp4:19937349 PDF (1.660 MB)
