Journal de Physique IV

Material Property Requirements for Modelling Metal Machining p. C3-XXI

T.H.C. Childs

DOI: https://doi.org/10.1051/jp4:1997301

Effects of Strain Rate and Temperature in Forming Processes of Metals p. C3-XXXVII

K. Osakada

DOI: https://doi.org/10.1051/jp4:1997302

Dynamic Compaction of Biomaterial Powders p. C3-3

M. Trécant-Viana, T. Le Neel, C. Canto-Nicolazo, E. Champion, M. Leroy et G. Daculsi

DOI: https://doi.org/10.1051/jp4:1997303

Shock-Wave Synthesis of Intermetallic Compounds Ti₃Al, TiAl Analysis of Heterophase Structure Formation p. C3-7

E.V. Shorokhov, B.A. Greenberg, T.S. Boyarshinova, S.V. Sudareva, V.I. Buzanov, O.V. Antonova et E.V. Panova

DOI: https://doi.org/10.1051/jp4:1997304

Comparison of Constitutive Flow Curve Relations in Cold and Hot Forming p. C3-13

L.W. Meyer, A. Weise et F. Hahn

DOI: https://doi.org/10.1051/jp4:1997305

An Experimental Method for the Cutting Process in Three Dimensions p. C3-21

D. Toulouse, Y. Couetard, O. Cahuc et A. Gerard

DOI: https://doi.org/10.1051/jp4:1997306

Shear-Induced Exothermic Chemical Reactions p. C3-27

H.C. Chen, V.F. Nesterenko, J.C. LaSalvia et M.A. Meyers

DOI: https://doi.org/10.1051/jp4:1997307

Experimental Analysis of the Cutting Process and Chip Formation at High Speed Machining p. C3-33

G. Sutter, L. Faure, A. Molinari, A. Delime et D. Dudzinski

DOI: https://doi.org/10.1051/jp4:1997308

Working Process for Superconductors by Means of HERF-Technique p. C3-39

N. Göbl et A. Szalay

DOI: https://doi.org/10.1051/jp4:1997309

Pulse-Magnetic Processing Technology when Making Parts and Units of Aerospace Engineering p. C3-45

V. A. Glouschenkov, F. V. Grechnikov et B. S. Malyshev

DOI: https://doi.org/10.1051/jp4:1997310

Thermobimetals Mechanical Properties Produced by Explosive Welding with Rolling p. C3-49

V.N. Gulbin, A.G. Kobelev et D.E. Borissov

DOI: https://doi.org/10.1051/jp4:1997311

Numerical Simulation of Ultrasonic Surface Treatment p. C3-55

R.R. Balokhonov, P.V. Makarov et V.A. Romanova

DOI: https://doi.org/10.1051/jp4:1997312

Static and Dynamic Processing of Intractable ArFRP Laminates p. C3-61

T. Nojima et K.-I. Sakaguchi

DOI: https://doi.org/10.1051/jp4:1997313

New Experimental Method for Consolidation some Refractory and Nonmetallic Powders p. C3-67

A. Peikrishvili, L. Japaridze, N. Chikhradze et Z. Chikviladze

DOI: https://doi.org/10.1051/jp4:1997314

Shock Wave Use for Diamond Synthesis p. C3-73

V.V. Sobolev, Y.N. Taran et S.I. Gubenko

DOI: https://doi.org/10.1051/jp4:1997315

Precision Measurements of Vehicle Crashworthiness by Means of a Large Hopkinson Bar p. C3-79

C. Albertini, E. Cadoni et K. Labibes

DOI: https://doi.org/10.1051/jp4:1997316

On Spurious Reflection Waves in Hopkinson Bar Tensile Tests Using a Collar p. C3-85

C.H. Nguyen et H.J. Schindler

DOI: https://doi.org/10.1051/jp4:1997317

Stress Equilibrium in the Split Hopkinson Pressure Bar Test p. C3-91

X.J. Wu et D.A. Gorham

DOI: https://doi.org/10.1051/jp4:1997318

Measurement of Energy Reflection Coefficient Using Stress Waves p. C3-97

N. Nakayama, T. Sano et H. Takeishi

DOI: https://doi.org/10.1051/jp4:1997319

Materials Testing for Constitutive relations p. C3-103

D. Macdougall et J. Harding

DOI: https://doi.org/10.1051/jp4:1997320

The Electromagnetic Cylindrical Compression : A Tool to Test Behavior Modeling under Large Strain at High Strain Rate p. C3-109

J. Petit, Y.A. Alexeev, S.P. Ananiev et M.N. Kazeev

DOI: https://doi.org/10.1051/jp4:1997321

Scaling Effects in Penetration : A Taylor Test Approach p. C3-115

J.U. Cazamias et S.J. Bless

DOI: https://doi.org/10.1051/jp4:1997322

Dynamic Behavior of Metals to Magnetic Field Pulses p. C3-121

M. Leroy, C. Nicolazo, P.F. Louvigné et T. Thomas

DOI: https://doi.org/10.1051/jp4:1997323

Phenomenon of Spiral Vortex Formation Over the Skock Wave Front p. C3-127

V. Sobolev et I. Hogset Hove

DOI: https://doi.org/10.1051/jp4:1997324

Nouvelle méthode expérimentale d'étude du comportement dynamique à grande vitesse de déformation des plaques minces - sollicitation par explosion p. C3-131

O. Pennetier et J. Renard

DOI: https://doi.org/10.1051/jp4:1997325

Impact of Alumina Rods - A Computational and Experimental Study p. C3-137

L.C. Chhabildas, M.D. Furnish et D.E. Grady

DOI: https://doi.org/10.1051/jp4:1997326

High Temperature Spalling of Alumina Bars p. C3-145

J. Najar et M. Müller-Bechtel

DOI: https://doi.org/10.1051/jp4:1997327

Tensile Strength Measurements of Ceramic Materials at High Rates of Strain p. C3-151

F. Gálvez, J. Rodríguez et V. Sánchez

DOI: https://doi.org/10.1051/jp4:1997328

Impact and Penetration of a Borosilicate Glass p. C3-157

N.K. Bourne, L.C. Forde, J.C.F. Millett et J.E. Field

DOI: https://doi.org/10.1051/jp4:1997329

A Methodology and Tools for the Study of Composite Structures Under Impact Loading : Application to Long Fiber Laminated Structures p. C3-163

F. Collombet, X. Lalbin, J.-L. Charles, G. Jeronimidis et J.-L. Lataillade

DOI: https://doi.org/10.1051/jp4:1997330

In-Plane Impact Loading of Composites : Optical Evaluation and Crack Severity Assessment for Graphite- Epoxy p. C3-169

F.G. Benitez et L. Andrades

DOI: https://doi.org/10.1051/jp4:1997331

The Use of High Strain Rate Testing to the Study of Turbine Missile Impact p. C3-175

J. Buchar, M. Lazar, S. Rolc et J. Hrebícek

DOI: https://doi.org/10.1051/jp4:1997332

Experimental Substantiation of Cracked Parts Dynamic Failures Diagnostics p. C3-181

A.B. Roytman et T.A. Bychenko

DOI: https://doi.org/10.1051/jp4:1997333

Definition of a Dynamic Optical Sensor for Measuring Unsteady Pressures p. C3-185

P. Chapuis et J.M. Maillard

DOI: https://doi.org/10.1051/jp4:1997334

Dynamic Local Strain Measurement From the Digital Image Processing of the Grating Interrogation p. C3-193

V. Vallé, M. Cottron et A. Lagarde

DOI: https://doi.org/10.1051/jp4:1997335

76/62 PFF Projectiles Effectiveness p. C3-199

F. Javier Criado, A. Lázaro-Carrasco et J.L. Pérez Minguez

DOI: https://doi.org/10.1051/jp4:1997336

Measurement of the Effects of High-Pressure Laser Shocks on Metallic Targets p. C3-205

T. De Rességuier, S. Couturier, J. David et G. Niérat

DOI: https://doi.org/10.1051/jp4:1997337

The Development of a Method of Measuring a Condensed Matter Electroconductivity for Investigation of Dielectric-Metal Transitions in a Shock Wave p. C3-211

S.D. Gilev et T.Y. Mihailova

DOI: https://doi.org/10.1051/jp4:1997338

The Procedure and Device of Pulse-Magnetic Loading Parameters Measuring p. C3-217

R.J. Jusupov, V.A. Glouschenkov et S.A. Igolkin

DOI: https://doi.org/10.1051/jp4:1997339

An Empirical Method of Dispersion Correction in the Compressive Hopkinson Bar Test p. C3-223

D.A. Gorham et X.J. Wu

DOI: https://doi.org/10.1051/jp4:1997340

High Speed Tensile Testing p. C3-229

I.H. Hove, B. Andersson et T.E. Johnsen

DOI: https://doi.org/10.1051/jp4:1997341

Expanding Ring Test : Numerical Simulation - Application to the Analysis of Experimental Data p. C3-235

F. Llorca et A. Juanicotena

DOI: https://doi.org/10.1051/jp4:1997342

A New Parameter Characterising the Ballistic Performance of Ceramics p. C3-241

K. Hoog, H.-J. Ernst et T. Wolf

DOI: https://doi.org/10.1051/jp4:1997343

Large Scale Impact Tests on 50 mm Diameter Tensile Samples - Correlation of Experimental Results with Finite Element Models p. C3-247

P. Kerry et C. Wilson

DOI: https://doi.org/10.1051/jp4:1997344

Impact Tensile Strength and Fracture of Concrete p. C3-253

M. Diamaruya, H. Kobayashi et T. Nonaka

DOI: https://doi.org/10.1051/jp4:1997345

On the Use of the Hopkinson Bar for the Determination of the Transient Dynamic Behaviour of Pure Iron p. C3-259

M. Leroy, P.F. Louvigne, C. Nicolazo et P. Longere

DOI: https://doi.org/10.1051/jp4:1997346

A New Specimen Geometry for Compression Hopkinson Bars p. C3-265

B. Deltort, A. Neme et B. Tanguy

DOI: https://doi.org/10.1051/jp4:1997347

The Effects of Friction on the Compressive Behaviour of High Strength Steels p. C3-271

M. Ashton et D.J. Parry

DOI: https://doi.org/10.1051/jp4:1997348

Mesures de température et de changement de phase de bandes de cisaillement adiabatique dans un alliage TA6V p. C3-277

V. Pina, A. Riguet, P. Hervé et P. Müller

DOI: https://doi.org/10.1051/jp4:1997349

Measurement of Shock Residual Temperature in Steel with the Help of phase Transitions in Zirconium and Titanium p. C3-283

A.M. Podurets et A.R. Kutsar

DOI: https://doi.org/10.1051/jp4:1997350

Soft Recovery Device For Shocked Brittle Materials p. C3-289

J. P. Ponsonnaille et P.L. Héreil

DOI: https://doi.org/10.1051/jp4:1997351

Dynamic Stress Concentration Factor in the Strip Plate with Fillet p. C3-295

N. Nakayama, M. Ohashi, T. Sano, S. Horikoshi et H. Takeishi

DOI: https://doi.org/10.1051/jp4:1997352

Investigation of Bulging During Impact in Composite Armour p. C3-301

H. Senf, E. Strassburger et H. Rothenhäusler

DOI: https://doi.org/10.1051/jp4:1997353

High Speed Cinematography of Cracks Spreading Under Failure of Amorphous Metallic Alloys p. C3-307

E.D. Tabachnikova, Y.I. Golovin, M.V. Makarov et A.A. Shibkov

DOI: https://doi.org/10.1051/jp4:1997354

High Speed Photography of Moire Fringes. Application to Ceramics Under Impact p. C3-311

T. Bertin-Mourot, C. Denoual, G. Deshors, P. F. Louvigné et T. Thomas

DOI: https://doi.org/10.1051/jp4:1997355

A High-Speed Photographic Study of the Rapid Deformation of Metal Annuli : Comparison of Theory with Experiment p. C3-317

S.M. Walley, P.D. Church, M. Furth et J.E. Field

DOI: https://doi.org/10.1051/jp4:1997356

Investigation of Shock-Wave Characteristics of Porous Multi-Component Materials Under Explosive Loading by Undisturbing Electromagnetic Method p. C3-323

I.V. Yakovlev, V.V. Pai et G.E. Kuz'min

DOI: https://doi.org/10.1051/jp4:1997357

Pulse X-Ray Diffraction Study of Shock-Compressed NaCl p. C3-329

E. Zaretsky

DOI: https://doi.org/10.1051/jp4:1997358

Material Behavior in Plane Polyurethane-Polyurethane Impact with Velocities from 10 to 400 m/sec p. C3-335

D. Tsukinovsky, E. Zaretsky et I. Rutkevich

DOI: https://doi.org/10.1051/jp4:1997359

Large Strain Range Dynamic Testing at High and Medium Strain Rates, Using a Common Scale SHPB p. C3-341

H. Zhao et G. Gary

DOI: https://doi.org/10.1051/jp4:1997360

Dynamic Ductility of Metals p. C3-349

E. El-Magd, H. Scholles et H. Weisshaupt

DOI: https://doi.org/10.1051/jp4:1997361

X-Ray Diffraction Studies of Structures of Be, Al, LiF, Fe+3%Si, Si, SiO₂, KCl under Dynamic Pressures from 2 Gpa to 20 Gpa p. C3-355

L.A. Egorov, A.I. Barenboim, V.V. Mokhova, V.V. Dorohin et A.I. Samoilov

DOI: https://doi.org/10.1051/jp4:1997362

Enhanced Diffusion in Shock Activated Be-Al Interfaces p. C3-361

K.P. Staudhammer

DOI: https://doi.org/10.1051/jp4:1997363

Study of Dynamic Behavior of Dense Silicon Nitride Ceramics at Elevated Temperature p. C3-367

J. Yuan et T. Shioya

DOI: https://doi.org/10.1051/jp4:1997364

Dynamic Behavior of High Strength Armor Steels p. C3-373

H. Nahme et E. Lach

DOI: https://doi.org/10.1051/jp4:1997365

Dynamic Mechanical Properties of Automotive Thin Sheet Steel in Tension, Compression and Shear p. C3-379

M. Quik, K. Labibes, C. Albertini, T. Valentin et P. Magain

DOI: https://doi.org/10.1051/jp4:1997366

Compression Tests of Polycrystalline α-Iron up to High Strains Over a Large Range of Strain Rates p. C3-385

D. Ostwaldt, J.R. Klepaczko et P. Klimanek

DOI: https://doi.org/10.1051/jp4:1997367

Dynamical Behaviour of Very High Strength Nitrogen Alloyed Steels p. C3-391

A. Lichtenberger, E. Lach et F. Rondot

DOI: https://doi.org/10.1051/jp4:1997368

The Effect of Deformation in the Two-Phase Region of C-Mn and Microalloyed Steels on the Mechanical Behaviour of the Resulting Structure p. C3-397

J. Majta, A. Zurek et M. Pietrzyk

DOI: https://doi.org/10.1051/jp4:1997369

Conditions for Shear Band Formation in Tungsten Alloys p. C3-403

H. Couque et N. Eches

DOI: https://doi.org/10.1051/jp4:1997370

Dynamic Tensile Behavior of 93wt.% Tungsten Alloy and its Fractal Features of Fracture p. C3-409

B.-P. Zhang, C. Ding, B. Liu, T. Jiao, H. Lin et S.-H. Zhou

DOI: https://doi.org/10.1051/jp4:1997371

Analysis of Shear Band Effects in Titanium Relative to High Strain-Rate Laboratory/Ballistic Impact Tests p. C3-415

L.W. Meyer, L. Krueger, M. Gooch et M. Burkins

DOI: https://doi.org/10.1051/jp4:1997372

Influence of Strain Rate and Temperature on the Structure. Property Behavior of High-Purity Titanium p. C3-423

G.T. Gray III

DOI: https://doi.org/10.1051/jp4:1997373

On the Quantitative Evaluation of Adiabatic Shear Banding Sensitivity of Various Titanium Alloys p. C3-429

C. Mazeau, L. Beylat, P. Longère et P.F. Louvigné

DOI: https://doi.org/10.1051/jp4:1997374

High-Strain, High-Strain Rate Deformation, Shear Localization and Recrystallization in Tantalum p. C3-435

Y.J. Chen, J.C. LaSalvia, V.F. Nesterenko, M.A. Meyers, M.P. Bondar et Y.L. Lukyanov

DOI: https://doi.org/10.1051/jp4:1997375

High-Strain, High-Strain-Rate Deformation Behavior of Tantalum and Tantalum-Tungsten Based Alloys p. C3-441

F.D.S. Marquis et Y.J. Chen

DOI: https://doi.org/10.1051/jp4:1997376

Thermomechanical Properties of Polymers at High Rates of Strain p. C3-447

A. Trojanowski, C. Ruiz et J. Harding

DOI: https://doi.org/10.1051/jp4:1997377

Crystallinity Increases in Semi Crystalline Polymers During High Rate Testing p. C3-453

G.M. Swallowe, J.O. Fernandez et S. Hamdan

DOI: https://doi.org/10.1051/jp4:1997378

High-Strain-Rate Behavior of Several Types of Epoxy-Based Composites p. C3-459

V.V. Silvestrov et A.V. Plastinin

DOI: https://doi.org/10.1051/jp4:1997379

Material Characterization Tests and Modelling of Carbon Fibre T300/914 at Impact Rates of Strain p. C3-465

S.R. Hallett et C. Ruiz

DOI: https://doi.org/10.1051/jp4:1997380

Uniaxial Compressive Behaviour of an Isotropic Graphite p. C3-471

A. Cosculluela et J. Farre

DOI: https://doi.org/10.1051/jp4:1997381

Low-Melting Metal Resistance to Plastic Strain in Shock-Compressed State p. C3-477

Yu.V. Batikov, B.L. Glushak, S.A. Novikov et N.D. Fishman

DOI: https://doi.org/10.1051/jp4:1997382

The Influence of a Degree of Initial Material Defects on the Strain Structure Formed in the Explosive Collapsing Thick-Walled Cylinders p. C3-481

M. Bondar, Ya.L. Lukyanov et T. Teslenko

DOI: https://doi.org/10.1051/jp4:1997383

Dynamic properties of Some Wood Species p. C3-487

A. Bragov et A.K. Lomunov

DOI: https://doi.org/10.1051/jp4:1997384

Dynamic Yield Strength of a Zirconium Base Metallic Glass p. C3-493

C.F. Cline, L. Jacobson et J.E. Reaugh

DOI: https://doi.org/10.1051/jp4:1997385

Dynamic Behaviour of Polycarbonate/Polyurethane Multi-Layer for Transparent Armor p. C3-499

W. Toqueboeuf, B. Mortaigne et C. Cottenot

DOI: https://doi.org/10.1051/jp4:1997386

Comportement du béton en dynamique rapide p. C3-505

J.F. Dubé, A. Kanji Nanji et C. Wielgosz

DOI: https://doi.org/10.1051/jp4:1997387

Localisation of Deformation and Damage under Adiabatic Compression p. C3-511

E. El-Magd, C. Treppmann et H. Weisshaupt

DOI: https://doi.org/10.1051/jp4:1997388

Dynamic Strength of Fiber Glass Shells p. C3-517

M.A. Syrunin, A.G. Fedorenko et A.G. Ivanov

DOI: https://doi.org/10.1051/jp4:1997389

Influence of Temperature and Strain Rate on the Mechanical Behavior of Adiprene L-100 p. C3-523

G.T. Gray III, W.R. Blumenthal, C.P. Trujillo et R.W. Carpenter II

DOI: https://doi.org/10.1051/jp4:1997390

Shock Behaviour of 3D Carbon-Carbon Composite p. C3-529

P.-L. Héreil, O. Allix et M. Gratton

DOI: https://doi.org/10.1051/jp4:1997391

Experimental Characterization of Shock Wave Behavior of Porous Aluminum p. C3-535

P.-L. Héreil, S. Bonnan et F. Collombet

DOI: https://doi.org/10.1051/jp4:1997392

Contribution du test d'expansion d'anneaux à l'étude de différentes lois de comportement élastoplastique dans le domaine des grandes vitesses de déformation. Application au cuivre et à l'acier Mars 190 p. C3-541

A. Juanicotena et F. Llorca

DOI: https://doi.org/10.1051/jp4:1997393

Hardening of Nitrogen Alloyed Steels by Shock Waves p. C3-547

E. Lach, P. Uggowitzer et F. Rondot

DOI: https://doi.org/10.1051/jp4:1997394

On the Application of Fiber-Reinforced Materials of Low Density in Construction Elements Subjected to High Loads p. C3-553

H.F. Lehr, E. Lach, U. Wiese et A. Bohmann

DOI: https://doi.org/10.1051/jp4:1997395

Thermomechanical Properties of Polycrystalline Vanadium in Compression p. C3-559

A.M. Lennon et K.T. Ramesh

DOI: https://doi.org/10.1051/jp4:1997396

Investigations on Granular Ceramics and Ceramic Powder p. C3-565

L.W. Meyer et I. Faber

DOI: https://doi.org/10.1051/jp4:1997397

Behavior of Quenched and Tempered Steels under High Strain Rate Compression Loading p. C3-571

L.W. Meyer, K. Seifert et S. Abdel-Malek

DOI: https://doi.org/10.1051/jp4:1997398

Shear Localization and Comminution of Granular and Fragmented Silicon Carbide p. C3-577

C.J. Shih, V.F. Nesterenko et M.A. Meyers

DOI: https://doi.org/10.1051/jp4:1997399

Viscosity of Metals under Shock-Loading Conditions p. C3-583

V.N. Mineev et A.V. Mineev

DOI: https://doi.org/10.1051/jp4:19973100

Dynamic Behavior of a Shock-Loaded Glass-Ceramic Based on the Li₂O-Al₂O₃-SiO₂ System p. C3-587

M. Hiltl et H. Nahme

DOI: https://doi.org/10.1051/jp4:19973101

Dynamic Characterization of TiAl Intermetallic in Hot Compression p. C3-593

P. Gardiner, H. Miguélez, R. Cortés, Y. LePetitcorps, B. Dodd et C. Navarro

DOI: https://doi.org/10.1051/jp4:19973102

Mechanical Behaviors of β-Titanium Alloy at High Rates of Strain p. C3-599

K. Ogawa

DOI: https://doi.org/10.1051/jp4:19973103

The Effect of Strain Rate on the Compressive Stress-Strain Properties of PEEK and Epoxy Carbon Fibre Composites p. C3-605

D.J. Parry

DOI: https://doi.org/10.1051/jp4:19973104

Validation of Constitutive Equations for Steel p. C3-611

T. Valentin, P. Magain, M. Quik, K. Labibes et C. Albertini

DOI: https://doi.org/10.1051/jp4:19973105

Dynamic Axisymmetric and Non-Axisymmetric Buckling of Finite Cylindrical Shells in Propagating and Reflecting of Axial Stress Waves p. C3-617

X. Xu, J. Xu, S. Liu et K. Liu

DOI: https://doi.org/10.1051/jp4:19973106

Thermomechanical Response of Aluminum to Pulsed Electron Beam p. C3-623

W. Tang et R. Zhang

DOI: https://doi.org/10.1051/jp4:19973107

Evaluation of the Parameters of a Constitutive Mode1 for b.c.c. Metals Based on Thermal Activation p. C3-631

F. Buy, J. Farre, J.R. Klepaczko et G. Talabart

DOI: https://doi.org/10.1051/jp4:19973108

Dislocation Mechanics Based analysis of Material Dynamics Behavior : Enhanced Ductility, Deformation Twinning, Shock Deformation, Shear Instability, Dynamic Recovery p. C3-637

F.J. Zerilli et R.W. Armstrong

DOI: https://doi.org/10.1051/jp4:19973109

A Mesomechanical Modelling of Porous Aluminum under Dynamic Loading : Comparison Experiment-Calculation p. C3-643

F. Collombet, S. Bonnan et P.L. Héreil

DOI: https://doi.org/10.1051/jp4:19973110

Simulation of Substructure Evolution During High-Speed Deformation p. C3-649

W. Pantleon, J.T.R. Trotzschel et P. Klimanek

DOI: https://doi.org/10.1051/jp4:19973111

Modeling and Evaluation of HE Driven Shock Effects In Copper with the MTS Mode1 p. C3-655

M.J. Murphy et D.H. Lassila

DOI: https://doi.org/10.1051/jp4:19973112

Modèle d'endommagement micromécanique anisotrope appliqué à des céramiques p. C3-663

C. Aymard (Vinet) et P. Priou

DOI: https://doi.org/10.1051/jp4:19973113

Physics and Modeling of Shock-Wave Dispersion in Heterogeneous Composites p. C3-669

D. Grady

DOI: https://doi.org/10.1051/jp4:19973114

Impact on 3D Carbon/Carbon Composites : a Meso-Scale Approach p. C3-675

O. Allix, M. Dommanget, M. Gratton et P.L. Héreil

DOI: https://doi.org/10.1051/jp4:19973115

Behaviour Modelling of Two Aluminas in Divergent Spherical Pyrotechnical experiments p. C3-681

F. Malaise, J.-Y. Tranchet et F. Collombet

DOI: https://doi.org/10.1051/jp4:19973116

Modelling of Fracture Processes in the Ballistic Impact on Ceramic Armours p. C3-687

R. Zaera et V. Sánchez-Gálvez

DOI: https://doi.org/10.1051/jp4:19973117

Plane Behaviour at High Strain Rates of a Quasi-Unidirectional E-Glass/Polyester Composite : Impact Application p. C3-693

C. Kammerer et A. Neme

DOI: https://doi.org/10.1051/jp4:19973118

Dynamic Necking of Rods at High Strain Rates p. C3-699

V. Jeanclaude et C. Fressengeas

DOI: https://doi.org/10.1051/jp4:19973119

A Path Dependent Model for Ductile Fracture p. C3-705

B.D. Goldthorpe

DOI: https://doi.org/10.1051/jp4:19973120

Numerical Simulation of the Impact of Projectiles on Thin Aluminium Plates p. C3-711

J.L. Pérez-Castellanos, R. Cortés, J. Fernandez-Saez et C. Navarro

DOI: https://doi.org/10.1051/jp4:19973121

Localisation of Thermoelastoplastic Deformations in the Case of Simple Shear. p. C3-717

P. Guélin, W.K. Nowacki et H.V. Nguyen

DOI: https://doi.org/10.1051/jp4:19973122

Fe-Modeling of Fibre Reinforced Concrete Slabs Subjected to Blast Load p. C3-723

L. Ågårdh

DOI: https://doi.org/10.1051/jp4:19973123

A Hydrodynamic Model of Super-Deep Penetration Effect p. C3-729

S.K. Andilevko

DOI: https://doi.org/10.1051/jp4:19973124

Modeling Anisotropic Plasticity : Eulerian Hydrocode Applications of High Strain-Rate Deformation Processes p. C3-735

S.P. Clancy, M.W. Burkett et P.J. Maudlin

DOI: https://doi.org/10.1051/jp4:19973125

Influence of Twinning on the Constitutive Reponses of Zr : Experirnents and Modeling p. C3-741

S.R. Chen et G.T. Gray III

DOI: https://doi.org/10.1051/jp4:19973126

A Comparison of 3D Simulations Against Experiments for the Torsion Test p. C3-747

P. Church et J. Macmahon

DOI: https://doi.org/10.1051/jp4:19973127

The Effect of Algorithm Form on Deformation and Instability in Tension p. C3-753

B.D. Goldthorpe et P. Church

DOI: https://doi.org/10.1051/jp4:19973128

Rectangular Plates Subjected to Blast Loading : the Comparison Between Experimental Results, Numerical Analysis and Simplified Analytical Approach p. C3-761

K. Cichocki et U. Perego

DOI: https://doi.org/10.1051/jp4:19973129

Impact Produced Stress Waves in Composites p. C3-767

B.E. Clements, J.N. Johnson, F.L. Addessio et R.S. Hixson

DOI: https://doi.org/10.1051/jp4:19973130

Super-Deep Penetration Phenomena as Resonance Excitation of Self-Keeping Spall Failure in Impacted Materials p. C3-773

O. Naimark, F. Collombet et J.-L. Lataillade

DOI: https://doi.org/10.1051/jp4:19973131

Méthodologie pour le dimensionnement à l'impact d'un empilement linéaire élastique et viscoélastique p. C3-779

B. Vidal, J.-L. Lataillade, F. Collombet et C. Bacon

DOI: https://doi.org/10.1051/jp4:19973132

On the Critical Nominal Strain in Adiabatic Shear Banding p. C3-785

J.L. Minot et C. Fressengeas

DOI: https://doi.org/10.1051/jp4:19973133

Numerical Study of Spall in an Aluminum Alloy under Planar Impact Loading p. C3-791

S. Hanim et J.R. Klepaczko

DOI: https://doi.org/10.1051/jp4:19973134

Improving Contact-Friction Conditions in Dynamic Simulations : Application to the Taylor Impact Test p. C3-797

J. Bonini, F. Llorca, H. Bung et A. Juanicotena

DOI: https://doi.org/10.1051/jp4:19973135

Propagation of Adiabatic Shear Bands p. C3-803

S. Mercier et A. Molinari

DOI: https://doi.org/10.1051/jp4:19973136

Modélisation du délaminage dans un composite stratifié à partir solveur de Riemann p. C3-809

C. Aymard (Vinet), A.Y. Le Roux et P. Priou

DOI: https://doi.org/10.1051/jp4:19973137

The Influence of Defects Localization and Stable Mezoparticles Formation on the Behaviour of Material under Impact Loading p. C3-815

E.I. Prockuratova et D.A. Indejtchev

DOI: https://doi.org/10.1051/jp4:19973138

A Simple Analytical Model for Ballistic Impact in Composites p. C3-821

I.S. Chocron Benloulo, J. Rodriguez et V. Sánchez Gálvez

DOI: https://doi.org/10.1051/jp4:19973139

Adiabatic Shear in Remco Iron and Quenched and Tempered 4340 Steel p. C3-827

C.R. Mason, M.J. Worswick et P.J. Gallagher

DOI: https://doi.org/10.1051/jp4:19973140

An Internal Variable Model for the Dynamic Reponse of Composites with Periodic Microstructure p. C3-833

C. Wozniak

DOI: https://doi.org/10.1051/jp4:19973141

Quantitative Analysis of Damage Clustering and Void Linking for Spallation Modeling in Tantalum p. C3-841

D.L. Tonks, W.R. Thissell, A.K. Zurek et R. Hixson

DOI: https://doi.org/10.1051/jp4:19973142

Analysis of Some Thermal Instability Criteria in the Adiabatic Shear Banding Process p. C3-849

C.H. Nguyen

DOI: https://doi.org/10.1051/jp4:19973143

Adiabatic Shear Fracture of Titanium Alloy Subjected to High Strain Rate and high Temperature Loadings p. C3-855

W.S. Lee et C.F. Lin

DOI: https://doi.org/10.1051/jp4:19973144

The Influence of Mode-Mixity on Dynamic Failure Mode Transitions in Polycarbonate p. C3-861

D. Rittel, R. Levin et H. Maigre

DOI: https://doi.org/10.1051/jp4:19973145

Fracture Mechanics at Intermediate Rates of Loading : The Influence of the Acceleration on Compact Tension Tests p. C3-867

P. Beguelin, C. Fond et H.H. Kausch

DOI: https://doi.org/10.1051/jp4:19973146

Charpy V-Notch Impact Testing and Brittle Fracture in an A508 CL.3 Bainitic Steel p. C3-873

M. Tahar, C. Brillaud, P. Forget et R. Piques

DOI: https://doi.org/10.1051/jp4:19973147

Étude de la transition fragile-ductile d'un tungstène p. C3-879

J. Farre, M. Lamaison, A. Cosculluela et J.-L. Lataillade

DOI: https://doi.org/10.1051/jp4:19973148

Strain Rate and Temperature Effects on the Non Linear Behaviour and the Damage Process Induced by Tensile Loading within RTPMMA « Rubber Toughened Polymethylmethacrylate » p. C3-885

Y. Ibouchichene-Aiche et J.-L. Lataillade

DOI: https://doi.org/10.1051/jp4:19973149

Ductile Fracture of Pure Copper : An Experimental and Numerical Study p. C3-891

M.S. Mirza, D.C. Barton, P. Church et J.L. Sturges

DOI: https://doi.org/10.1051/jp4:19973150

Effets de la microstructure sur l'endommagement par écaillage des matériaux industriels p. C3-897

P. Chevrier et J.R. Klepaczko

DOI: https://doi.org/10.1051/jp4:19973151

Quantification of Damage Evolution for a Micromechanical Model of Ductile Fracture in Spallation of Tantalum p. C3-903

A.K. Zurek, W.R. Thissell, D.L. Tonks, R. Hixson et F. Addessio

DOI: https://doi.org/10.1051/jp4:19973152

An Experimental Approach to Validate Damage Evolution Laws for Brittle Materials p. C3-909

E. Strassburger, H. Senf, C. Denoual, P. Riou et C. Cottenot

DOI: https://doi.org/10.1051/jp4:19973153

Impact Fracture Process and Mechanical Properties of Plain Concrete by Means of an Hopkinson Bar Bundle p. C3-915

C. Albertini, E. Cadoni et K. Labibes

DOI: https://doi.org/10.1051/jp4:19973154

The Low Velocity Impact Behaviour of Glass-Polymer Laminated Plates p. C3-921

A. Ball

DOI: https://doi.org/10.1051/jp4:19973155

Investigations of the Dynamic Strength Variations in Metals p. C3-927

K. Baumung, G.I. Kanel, S.V. Razorenov, D. Rusch, J. Singer et A.V. Utkin

DOI: https://doi.org/10.1051/jp4:19973156

Loading Rate Dependence of the Deformation and Fracture Mechanisms in Impact Modified Poly(Methyl Methacrylate) p. C3-933

P. Béguelin et H.H. Kausch

DOI: https://doi.org/10.1051/jp4:19973157

Mechanical and Physical Dynamic Effects under the Low Temperature Ductile Shear Failure of Amorphous Alloys p. C3-939

V. Bengus et V. Ocelik

DOI: https://doi.org/10.1051/jp4:19973158

Prise en compte du procédé de mise en forme d'un brancard dans les paramètres matériaux de simulation au CRASH p. C3-945

E. Blouet, J.L. Lagrange, L. Verger et G. Le Borgne

DOI: https://doi.org/10.1051/jp4:19973159

Strain Rate Dependence of the Spall Strength of Steels p. C3-951

J. Buchar, S. Rolc et J. Hrebícek

DOI: https://doi.org/10.1051/jp4:19973160

Intégration des caractéristiques des soudures dans les calculs de crash p. C3-957

P. Huss, M. Dannawi et S. Marya

DOI: https://doi.org/10.1051/jp4:19973161

Formation and Features of Adiabatic Shear Bands in Zr-Nb Alloys in Spherical Stress Waves p. C3-963

A.V. Dobromyslov, E.A. Kozlov et N.I. Taluts

DOI: https://doi.org/10.1051/jp4:19973162

Fracture Surface Energy Measurement at High Crack Speed Using a Strip Specimen : Application to Rubber Toughened PMMA p. C3-969

C. Fond et R. Schirrer

DOI: https://doi.org/10.1051/jp4:19973163

Splitting Process of Sikhote-Alinian Meteorite in the Context of Modern Fracture Mechanics p. C3-975

A.G. Ivanov et V.A. Ryzhanski

DOI: https://doi.org/10.1051/jp4:19973164

Modelling the Crash Response of Composite Structures p. C3-981

A.F. Johnson et D. Kohlgrüber

DOI: https://doi.org/10.1051/jp4:19973165

Behaviour of Crack-Rate Sensitive Brittle Materials in Dynamic Lateral Compression p. C3-987

H. Kobayashi et M. Daimaruya

DOI: https://doi.org/10.1051/jp4:19973166

Investigation of Dynamic Crack Propagation and Arrest for Pulse Loaded specimens Made from a Modified MoV-Steel (KS22) by Means of a Hopkinson-Pressure-Bar p. C3-993

K. Kussmaul et U. Mayer

DOI: https://doi.org/10.1051/jp4:19973167

Fracture Stress in Compression of TiB₂ : Strain Rate Sensibility and Modeling p. C3-999

M. Lamaison, J. Faire, A. Cosculluela et F. Collombet

DOI: https://doi.org/10.1051/jp4:19973168

Impact Fracture Testing of Engineering Polymers (Part 2) p. C3-1005

Z. Major et R.W. Lang

DOI: https://doi.org/10.1051/jp4:19973169

Determination of Granite Crack Resistance under Dynamic Loading p. C3-1011

S.A. Novikov, V.A. Pushkov et A.S. Eremenko

DOI: https://doi.org/10.1051/jp4:19973170

A Study of Damage during Impact in Zerodur p. C3-1015