Journal de Physique IV

Accès gratuit

Foreword

Foreword p. V

Sabine Denis, et al.

DOI: https://doi.org/10.1051/jp4:2004120095

Macro-, meso-, and nanoscopic metallo thermo mechanics p. 3

T. Inoue

DOI: https://doi.org/10.1051/jp4:2004120001

Modelling nitriding of iron: From thermodynamics to residual stress p. 21

M.A.J. Somers

DOI: https://doi.org/10.1051/jp4:2004120002

Simulation of thermal processes: Solutions studied in the automotive industry p. 35

M. Plateau

DOI: https://doi.org/10.1051/jp4:2004120003

Oxide reduction and diffusion in Fe-Cr alloy honeycombs p. 47

J.H. Nadler, T.H. Sanders Jr., J.K. Cochran et S.S. Kim

DOI: https://doi.org/10.1051/jp4:2004120004

Extraction of boron Fe₈0B₂0 ribbons by annealing under hydrogen flow p. 55

G. Saage, S. Roth, J. Eckert et L. Schultz

DOI: https://doi.org/10.1051/jp4:2004120005

The rate of solidification and the effects of local composition on the subsequent nucleation of Al₂0Cu₂Mn₃ dispersoid phase in Al-4Cu-0.3Fe-0.4Mn-0.2Si alloys p. 61

T.L. Zoeller et T.H. Sanders Jr.

DOI: https://doi.org/10.1051/jp4:2004120006

Modelling of grain boundary segregation kinetics that are responsible on irreversible and reversible temper embrittlement of engineering steels p. 69

A. Kovalev et D. Wainstein

DOI: https://doi.org/10.1051/jp4:2004120007

Motion of diffusional transformation fronts in multi-component systems p. 79

E. Gamsjäger, F.D. Fischer et J. Svoboda

DOI: https://doi.org/10.1051/jp4:2004120008

On the physical and mathematical interpretation of the isokinetic hypothesis p. 85

T. Reti

DOI: https://doi.org/10.1051/jp4:2004120009

Prediction of the kinetics of the phase transformations and the associated microstructure during continuous coolingin the Ti17 p. 93

J. Da Costa Teixeira, L. Héricher, B. Appolaire, E. Aeby-Gautier, G. Cailletaud, S. Denis et N. Spath

DOI: https://doi.org/10.1051/jp4:2004120010

Modelling of precipitation of carbides during tempering of martensite p. 103

Y. Wang, S. Denis, B. Appolaire et P. Archambault

DOI: https://doi.org/10.1051/jp4:2004120011

Modelling the ferrite/carbide → austenite transformation of hypoeutectoid and hypereutectoid steels p. 111

H. Surm, O. Kessler, M. Hunkel, F. Hoffmann et P. Mayr

DOI: https://doi.org/10.1051/jp4:2004120012

Modelling of retained austenite in carburized layers p. 121

M. Przyłęcka, W. Gęstwa et G.E. Totten

DOI: https://doi.org/10.1051/jp4:2004120013

Modelling of phase transformations and hardening of carbonitrided steels p. 129

M. Przyłęcka, W. Gęstwa et G.E. Totten

DOI: https://doi.org/10.1051/jp4:2004120014

Phases transformation textures in steels p. 137

C. Cabus, H. Regle et B. Bacroix

DOI: https://doi.org/10.1051/jp4:2004120015

Phase transitions and transformation-induced plasticity of steel in the framework of continuum mechanics p. 145

M. Böhm et A. Schmidt

DOI: https://doi.org/10.1051/jp4:2004120016

Objective modeling of some elastoplastic materials with phase changes p. 153

S. Dachkovski et M. Böhm

DOI: https://doi.org/10.1051/jp4:2004120017

An experimental mock-up for the study of steel behaviour at high temperature during phase transformation p. 161

Y. Vincent, J.-M. Bergheau, J.-B. Leblond et J.-F.Jullien

DOI: https://doi.org/10.1051/jp4:2004120018

Numerical simulation of welding stresses and distortions under consideration of temporal and local changes of strain rate p. 169

R. Ossenbrink, H. Wohlfahrt et V. Michailov

DOI: https://doi.org/10.1051/jp4:2004120019

Comparison of two transformation plasticity models, with and without kinematic hardening for bainitic transformation under non-proportional loading path p. 177

M. Coret et A. Combescure

DOI: https://doi.org/10.1051/jp4:2004120020

Thermal stresses in hexagonal materials –heat treatment influence on their mechanical behaviour p. 185

D. Gloaguen, S. Freour, M. François, R. Guillen et J. Royer

DOI: https://doi.org/10.1051/jp4:2004120021

Modelling of changes in physical and mechanical properties of structural materials during long-term exposures at elevated temperatures p. 191

J. Kohout

DOI: https://doi.org/10.1051/jp4:2004120022

Crack spacing in strained films p. 201

B.B. Guzina, D.H. Timm et V.R. Voller

DOI: https://doi.org/10.1051/jp4:2004120023

Modelling descaling during hot rolling of steel p. 209

J. Ramírez-Cuellar, M.P. Guerrero-Mata, L.A. Leduc et R. Colás

DOI: https://doi.org/10.1051/jp4:2004120024

Monte Carlo modelling of recrystallization in metals p. 217

J. Tarasiuk, Ph. Gerber et B. Bacroix

DOI: https://doi.org/10.1051/jp4:2004120025

Simulation of microstructure evolution during recrystallization using a high resolution three dimensional cellular automaton p. 225

P. Mukhopadhyay, M. Loeck et G. Gottstein

DOI: https://doi.org/10.1051/jp4:200412026

Modelling of phase distributions in MCrAlY coatings and their interactions with nickel based alloys p. 231

D.R.G. Achar, R. Munoz-Arroyo, L. Singheiser et W.J. Quadakkers

DOI: https://doi.org/10.1051/jp4:2004120027

Modelling post-discharge nitriding and nitrocarburising p. 239

T. Belmonte, C. Jaoul et H. Michel

DOI: https://doi.org/10.1051/jp4:2004120028

Prediction of phase distribution and chemical composition during gas carburizing of stainless steels p. 249

T. Turpin, J. Dulcy et M. Gantois

DOI: https://doi.org/10.1051/jp4:2004120029

The computer simulation of the boost diffusion oxidation process for the deep-case hardening of titanium alloys p. 259

J. Luo, Z. Zhang, H. Dong et T. Bell

DOI: https://doi.org/10.1051/jp4:2004120030

Heat transfer coefficients for quenching process simulation p. 269

M. Maniruzzaman et R.D. Sisson Jr.

DOI: https://doi.org/10.1051/jp4:2004120031

Estimation of a heat source by using the measured temperatures and micrographic informations; application to an electron beam welding process p. 279

J. Guo, P. Le Masson, E. Artioukhine, T. Loulou, P. Rogeon, D. Carron, M. Carin, M. Dumons et J. Costa

DOI: https://doi.org/10.1051/jp4:2004120032

Thermal modelling of a carbon/carbon composite material fabrication process p. 291

J.-F. Lines, G.L. Vignoles, J.-M. Goyheneche et J.-R. Puiggali

DOI: https://doi.org/10.1051/jp4:2004120033

Modelling the Marangoni convection in laser heat treatment p. 299

J.-M. Drezet, S. Pellerin, C. Bezençon et S. Mokadem

DOI: https://doi.org/10.1051/jp4:2004120034

Methodology for modeling the EB-PVD coating process p. 307

L. Nastac, F.R. Dax et W. Hanusiak

DOI: https://doi.org/10.1051/jp4:2004120035

Optimisation of the laser surface remelting process on strain criteria p. 315

J. Grum et R. Šturm

DOI: https://doi.org/10.1051/jp4:2004120036

Optimal control strategies for the surface hardening of steel p. 325

D. Hömberg, S. Volkwein et W. Weiss

DOI: https://doi.org/10.1051/jp4:2004120037

A new method for the numerical simulation of induction hardening processes p. 337

R. Pascal, P. Conraux et J.-M. Bergheau

DOI: https://doi.org/10.1051/jp4:2004120038

Simulating welding with shell elements p. 347

F. Faure, J.-M. Bergheau et J.-B. Leblond

DOI: https://doi.org/10.1051/jp4:2004120039

Nitriding parameters analized by neural network and genetic algorithm p. 355

T. Filetin, I. Žmak et D. Novak

DOI: https://doi.org/10.1051/jp4:2004120040

Plasma spray process modelling using artificial neural networks: Application to Al₂O₃-TiO₂ (13% by weight) ceramic coating structure p. 363

S. Guessasma, G. Montavon et C. Coddet

DOI: https://doi.org/10.1051/jp4:2004120041

A model of the interface between plasma jet simulation and the simulation of coating formation during atmospheric plasma spraying (APS) p. 373

E. Lugscheider, R. Nickel et N. Papenfuß-Janzen

DOI: https://doi.org/10.1051/jp4:2004120042

Computer predictions of thermo-mechanical behavior and residual stresses in spray coating process p. 381

D.-Y. Ju, V. Ji et H. Gassot

DOI: https://doi.org/10.1051/jp4:2004120043

Modelling of laser induced surface modification of ceramic substrates p. 389

U. Duitsch, S. Schreck et M. Rohde

DOI: https://doi.org/10.1051/jp4:2004120044

Simulation of laser cladding p. 397

J. Wilden, H. Frank, C. Theiler, T. Seefeld et G. Sepold

DOI: https://doi.org/10.1051/jp4:2004120045

Modelling of laser cladding of medium carbon steel - a first approach p. 405

J. Ahlström, B. Karlsson et S. Niederhauser

DOI: https://doi.org/10.1051/jp4:2004120046

Metallic thin films heated by pulsed lasers. Numerical simulation of the thermal field and the melting kinetics p. 413

N. Semmar et C. Boulmer-Leborgne

DOI: https://doi.org/10.1051/jp4:2004120047

Computational modeling of electroslag remelting processes p. 421

K.M Kelkar, J. Mok, S.V. Patankar et A. Mitchell

DOI: https://doi.org/10.1051/jp4:2004120048

FEM-Simulation of the electrode temperature distribution and crater formation. Part I: Breakdown of an electrical discharge p. 429

F. Soldera, A. Lasagni et F. Mücklich

DOI: https://doi.org/10.1051/jp4:2004120049

FEM-Simulation of the electrode temperature distribution and crater formation. Part II: Arc and glow phases of an electrical discharge p. 439

F. Soldera et F. Mücklich

DOI: https://doi.org/10.1051/jp4:2004120050

Developments in finite element simulations of continuous casting p. 447

S. Castagne, F. Pascon, G. Blès et A.-M. Habraken

DOI: https://doi.org/10.1051/jp4:2004120051

Optimum process conditions based on stresses distribution and crack formation for twin roll strip casting p. 457

D.-Y. Ju et H.-Y. Zhao

DOI: https://doi.org/10.1051/jp4:2004120052

Simulations of heat transfers in an autoclave. Applications to the curing of composite material parts p. 467

P. Salagnac, P. Dutournie et P. Glouannec

DOI: https://doi.org/10.1051/jp4:2004120053

Model of stress-induced phase transformation and prediction of internal stresses of large steel workpieces during quenching p. 473

W. Shi, X. Zhang et Z. Liu

DOI: https://doi.org/10.1051/jp4:2004120054

Influence of transformation plasticity on residual stresses and distortions due to the heat treatment of steels with different carbon contents p. 481

C. Franz, G. Besserdich, V. Schulze, H. Müller et D. Löhe

DOI: https://doi.org/10.1051/jp4:2004120055

Simulation of carburizing-quenching of a gear. Effect of carbon content on residual stresses and distortion p. 489

R. Mukai et D.-Y. Ju

DOI: https://doi.org/10.1051/jp4:2004120056

Computer simulation of induction surface hardening axially symmetric workpieces p. 499

D. Landek, F. Cajner et T. Filetin

DOI: https://doi.org/10.1051/jp4:2004120057

FEM simulation of laser forming process of shipbuilding steel plate p. 507

Zhang Liwen, Zhong Qi, Pei Jibin, Zhang Guoliang et Xia Yuanliang

DOI: https://doi.org/10.1051/jp4:2004120058

A model for the run out table cooling in a compact rolling mill p. 513

L. Hernandez, M.P. Guerrero-Malta, L.A. Leduc et R. Colas

DOI: https://doi.org/10.1051/jp4:2004120059

Heat transfer coefficients for quenching process simulation p. 521

M. Maniruzzaman et R.D. Sisson Jr.

DOI: https://doi.org/10.1051/jp4:2004120060

Analysis of temporal and spatial temperature gradients at pronouncedly fluctuating cooling conditions p. 529

A. Galović, M. Andrassy et S. Mudrinić

DOI: https://doi.org/10.1051/jp4:2004120061

Validation of a single component gas quenching model p. 537

P.F. Stratton et A. Richardson

DOI: https://doi.org/10.1051/jp4:2004120062

Numerical simulation of heat transfer in loaded heat treatment furnaces p. 545

J. Kang, Y.K. Rong et W. Wang

DOI: https://doi.org/10.1051/jp4:2004120063

Fluidized bed heat treatment of aluminum cast components p. 555

D. Apelian et S.K. Chaudhury

DOI: https://doi.org/10.1051/jp4:2004120064

Precipitation kinetics of NbC in ferrite of a Nb microalloyed steel p. 563

Y.-H. Choi, H.-C. Shin, C.-S. Choi et Y.-K. Lee

DOI: https://doi.org/10.1051/jp4:2004120065

Using the jominy end-quench test for validation of thermo-metallurgical model parameters p. 571

M. Hunkel, Th. Lübben, F. Hoffmann et P. Mayr

DOI: https://doi.org/10.1051/jp4:2004120066

Evaluation of various phase-transition models for 100Cr6 for application in commercial FEM programmes p. 581

M. Böhm, M. Hunkel, A. Schmidt et M. Wolff

DOI: https://doi.org/10.1051/jp4:2004120067

Description of short time phase transformations during the heating of steels based on high-rate experimental data p. 591

T. Mioković, J. Schwarzer, V. Schulze, O. Vöhringer et D. Löhe

DOI: https://doi.org/10.1051/jp4:2004120068

Experimental validation of a predictive model for numerical simulation of thermo-metallurgical phenomena during electron beam welding p. 599

M. Carin, Ph. Rogeon, D. Carron, Ph. Lemasson, D. Couedel, M. Dumons, J. Costa, R. Bertet, J.-C. Parpillon, P. Bocquet et M. Gauthier

DOI: https://doi.org/10.1051/jp4:2004120069

Microstructure evolution in cold rolled strips during continuous annealing - modelling and simulation p. 607

V. Hein, H. Freydank, U. Michel, H. Zieger, G. Zouhar, P. Foerster et H. Rühl

DOI: https://doi.org/10.1051/jp4:2004120070

Stress affected transformation in low alloy steels – factors limiting prediction of plastic strains p. 615

U. Ahrens, H.J. Maier et A.EL.M. Maksoud

DOI: https://doi.org/10.1051/jp4:2004120071

Studies of the thermo-mechanical material response of a Boron steel by inverse modelling p. 625

P. Åkerström et M. Oldenburg

DOI: https://doi.org/10.1051/jp4:2004120072

Thermal stress history in high-tensile strength steels during weld process p. 635

M. Mochizuki et M. Toyoda

DOI: https://doi.org/10.1051/jp4:2004120073

Numerical modelling and physical simulation of the softening behaviour of hot work tool steels during thermal fatigue p. 649

I. Siller, W. Waldhauser et R. Ebner

DOI: https://doi.org/10.1051/jp4:2004120074

Stresses in glass plate joined with other materials: Modeling and experimental validation p. 657

Y.K. Startsev

DOI: https://doi.org/10.1051/jp4:2004120075

A finite volume analysis of two-dimensional transient heat transfer in TIG welding p. 669

K.T. Chaouch, H. Maza et B. Belkessa

DOI: https://doi.org/10.1051/jp4:2004120076

Modelling friction stir welding with thermally coupled fluid dynamics p. 677

D. Schmitter et I.M. Zylla

DOI: https://doi.org/10.1051/jp4:2004120077

Numerical simulation of inertia friction welding process of GH4169 alloy p. 681

Zhang Liwen, Liu Chengdong, Qi Shaoan, Yu Yongsi, Zhu Wenhui, Qu Shen et Wang Jinghe

DOI: https://doi.org/10.1051/jp4:2004120078

Experimental validation of an electro-thermo-metallurgical predictive model in resistance spot welding p. 689

G. Sibilia, P. Rogeon, P. Paillard, G. Saindrenan, J. Soigneux, P. Lemasson et D. Carron

DOI: https://doi.org/10.1051/jp4:2004120079

Experimental and numerical simulation of thermomechanical phenomena during a TIG welding process p. 697

L. Depradeux et J.-F. Jullien

DOI: https://doi.org/10.1051/jp4:2004120080

Prediction of residual stresses in the heat affected zone p. 705

L. Taleb, S. Petit et J.-F. Jullien

DOI: https://doi.org/10.1051/jp4:2004120081

Modeling and experimental study of induction heating of moving bronze blocks p. 713

N.P. Kandev

DOI: https://doi.org/10.1051/jp4:2004120082

Modelling and experimental study of the bainitic transformation, residual stresses and deformations in the quenching process of middle alloyed steel parts p. 719

M. Veaux, S. Denis et P. Archambault

DOI: https://doi.org/10.1051/jp4:2004120083

Simulation of gas quenching p. 727

F. Frerichs, Th. Lübben, U. Fritsching, H. Lohner, A. Rocha, G. Löwisch, F. Hoffmann et P. Mayr

DOI: https://doi.org/10.1051/jp4:2004120084

Modeling and simulation technology for the advancement of materials processing technology p. 737

K. Funatani

DOI: https://doi.org/10.1051/jp4:2004120085

Thermal influence of cutting tool coatings p. 743

J. Rech, J.L. Battaglia et A. Moisan

DOI: https://doi.org/10.1051/jp4:2004120086

Application of numerical simulation of heat treatment in industry p. 753

M. Slováček

DOI: https://doi.org/10.1051/jp4:2004120087

Mechanical effects of water quenching on aluminum automotive parts p. 761

P. Auburtin, N. Morin et C. Pille

DOI: https://doi.org/10.1051/jp4:2004120088

Optimisation of high pressure gas quenching by application of CFD analysis p. 769

P. Schobesberger, M. Mann et M. Haigis

DOI: https://doi.org/10.1051/jp4:2004120089

Three-dimensional numerical simulation of the nitriding process p. 777

P. Duranton, J. Devaux, M. Larreur, R. Fortunier et J.-M. Bergheau

DOI: https://doi.org/10.1051/jp4:2004120090

Thermomechanical analysis applied to the laser beam welding simulation of aeronautical structures p. 785

C. Darcourt, J.M. Roelandt, M. Rachik, D. Deloison et B. Journet

DOI: https://doi.org/10.1051/jp4:2004120091

Achieving manufacturing quality and reliability using thru-process simulation p. 793

X.L. Chen, Z. Yang, A. Nanjundan, N. Chen et J.-J. Janosch

DOI: https://doi.org/10.1051/jp4:2004120092

Structure of the metallurgically oriented modelling system TK-StripCam for simulation of hot strip manufacture and application in research and production practice p. 801

U. Lotter, H.-P. Schmitz et L. Zhang

DOI: https://doi.org/10.1051/jp4:2004120093

An integrated batch annealing furnace simulator p. 809

S.S. Sahay

DOI: https://doi.org/10.1051/jp4:2004120094

Journal de Physique IV (Proceedings)

Volume 120 (December 2004)