Free Access Foreword Foreword p. V Sabine Denis, et al. DOI: https://doi.org/10.1051/jp4:2004120095 PDF (37.25 KB)
Macro-, meso-, and nanoscopic metallo thermo mechanics p. 3 T. Inoue DOI: https://doi.org/10.1051/jp4:2004120001 PDF (1012 KB)
Modelling nitriding of iron: From thermodynamics to residual stress p. 21 M.A.J. Somers DOI: https://doi.org/10.1051/jp4:2004120002 PDF (769.8 KB)
Simulation of thermal processes: Solutions studied in the automotive industry p. 35 M. Plateau DOI: https://doi.org/10.1051/jp4:2004120003 PDF (2.492 MB)
Oxide reduction and diffusion in Fe-Cr alloy honeycombs p. 47 J.H. Nadler, T.H. Sanders Jr., J.K. Cochran and S.S. Kim DOI: https://doi.org/10.1051/jp4:2004120004 PDF (315.3 KB)
Extraction of boron Fe80B20 ribbons by annealing under hydrogen flow p. 55 G. Saage, S. Roth, J. Eckert and L. Schultz DOI: https://doi.org/10.1051/jp4:2004120005 PDF (234.4 KB)
The rate of solidification and the effects of local composition on the subsequent nucleation of Al20Cu2Mn3 dispersoid phase in Al-4Cu-0.3Fe-0.4Mn-0.2Si alloys p. 61 T.L. Zoeller and T.H. Sanders Jr. DOI: https://doi.org/10.1051/jp4:2004120006 PDF (1.746 MB)
Modelling of grain boundary segregation kinetics that are responsible on irreversible and reversible temper embrittlement of engineering steels p. 69 A. Kovalev and D. Wainstein DOI: https://doi.org/10.1051/jp4:2004120007 PDF (279.0 KB)
Motion of diffusional transformation fronts in multi-component systems p. 79 E. Gamsjäger, F.D. Fischer and J. Svoboda DOI: https://doi.org/10.1051/jp4:2004120008 PDF (586.4 KB)
On the physical and mathematical interpretation of the isokinetic hypothesis p. 85 T. Reti DOI: https://doi.org/10.1051/jp4:2004120009 PDF (256.3 KB)
Prediction of the kinetics of the phase transformations and the associated microstructure during continuous coolingin the Ti17 p. 93 J. Da Costa Teixeira, L. Héricher, B. Appolaire, E. Aeby-Gautier, G. Cailletaud, S. Denis and N. Spath DOI: https://doi.org/10.1051/jp4:2004120010 PDF (982.5 KB)
Modelling of precipitation of carbides during tempering of martensite p. 103 Y. Wang, S. Denis, B. Appolaire and P. Archambault DOI: https://doi.org/10.1051/jp4:2004120011 PDF (255.4 KB)
Modelling the ferrite/carbide → austenite transformation of hypoeutectoid and hypereutectoid steels p. 111 H. Surm, O. Kessler, M. Hunkel, F. Hoffmann and P. Mayr DOI: https://doi.org/10.1051/jp4:2004120012 PDF (1.622 MB)
Modelling of retained austenite in carburized layers p. 121 M. Przyłęcka, W. Gęstwa and G.E. Totten DOI: https://doi.org/10.1051/jp4:2004120013 PDF (957.7 KB)
Modelling of phase transformations and hardening of carbonitrided steels p. 129 M. Przyłęcka, W. Gęstwa and G.E. Totten DOI: https://doi.org/10.1051/jp4:2004120014 PDF (231.2 KB)
Phases transformation textures in steels p. 137 C. Cabus, H. Regle and B. Bacroix DOI: https://doi.org/10.1051/jp4:2004120015 PDF (585.6 KB)
Phase transitions and transformation-induced plasticity of steel in the framework of continuum mechanics p. 145 M. Böhm and A. Schmidt DOI: https://doi.org/10.1051/jp4:2004120016 PDF (565.2 KB)
Objective modeling of some elastoplastic materials with phase changes p. 153 S. Dachkovski and M. Böhm DOI: https://doi.org/10.1051/jp4:2004120017 PDF (142.3 KB)
An experimental mock-up for the study of steel behaviour at high temperature during phase transformation p. 161 Y. Vincent, J.-M. Bergheau, J.-B. Leblond and J.-F.Jullien DOI: https://doi.org/10.1051/jp4:2004120018 PDF (341.3 KB)
Numerical simulation of welding stresses and distortions under consideration of temporal and local changes of strain rate p. 169 R. Ossenbrink, H. Wohlfahrt and V. Michailov DOI: https://doi.org/10.1051/jp4:2004120019 PDF (596.0 KB)
Comparison of two transformation plasticity models, with and without kinematic hardening for bainitic transformation under non-proportional loading path p. 177 M. Coret and A. Combescure DOI: https://doi.org/10.1051/jp4:2004120020 PDF (262.1 KB)
Thermal stresses in hexagonal materials –heat treatment influence on their mechanical behaviour p. 185 D. Gloaguen, S. Freour, M. François, R. Guillen and J. Royer DOI: https://doi.org/10.1051/jp4:2004120021 PDF (268.9 KB)
Modelling of changes in physical and mechanical properties of structural materials during long-term exposures at elevated temperatures p. 191 J. Kohout DOI: https://doi.org/10.1051/jp4:2004120022 PDF (394.3 KB)
Crack spacing in strained films p. 201 B.B. Guzina, D.H. Timm and V.R. Voller DOI: https://doi.org/10.1051/jp4:2004120023 PDF (390.6 KB)
Modelling descaling during hot rolling of steel p. 209 J. Ramírez-Cuellar, M.P. Guerrero-Mata, L.A. Leduc and R. Colás DOI: https://doi.org/10.1051/jp4:2004120024 PDF (565.0 KB)
Monte Carlo modelling of recrystallization in metals p. 217 J. Tarasiuk, Ph. Gerber and B. Bacroix DOI: https://doi.org/10.1051/jp4:2004120025 PDF (285.8 KB)
Simulation of microstructure evolution during recrystallization using a high resolution three dimensional cellular automaton p. 225 P. Mukhopadhyay, M. Loeck and G. Gottstein DOI: https://doi.org/10.1051/jp4:200412026 PDF (446.1 KB)
Modelling of phase distributions in MCrAlY coatings and their interactions with nickel based alloys p. 231 D.R.G. Achar, R. Munoz-Arroyo, L. Singheiser and W.J. Quadakkers DOI: https://doi.org/10.1051/jp4:2004120027 PDF (1.147 MB)
Modelling post-discharge nitriding and nitrocarburising p. 239 T. Belmonte, C. Jaoul and H. Michel DOI: https://doi.org/10.1051/jp4:2004120028 PDF (275.2 KB)
Prediction of phase distribution and chemical composition during gas carburizing of stainless steels p. 249 T. Turpin, J. Dulcy and M. Gantois DOI: https://doi.org/10.1051/jp4:2004120029 PDF (277.5 KB)
The computer simulation of the boost diffusion oxidation process for the deep-case hardening of titanium alloys p. 259 J. Luo, Z. Zhang, H. Dong and T. Bell DOI: https://doi.org/10.1051/jp4:2004120030 PDF (533.3 KB)
Heat transfer coefficients for quenching process simulation p. 269 M. Maniruzzaman and R.D. Sisson Jr. DOI: https://doi.org/10.1051/jp4:2004120031 PDF (1.842 MB)
Estimation of a heat source by using the measured temperatures and micrographic informations; application to an electron beam welding process p. 279 J. Guo, P. Le Masson, E. Artioukhine, T. Loulou, P. Rogeon, D. Carron, M. Carin, M. Dumons and J. Costa DOI: https://doi.org/10.1051/jp4:2004120032 PDF (1.698 MB)
Thermal modelling of a carbon/carbon composite material fabrication process p. 291 J.-F. Lines, G.L. Vignoles, J.-M. Goyheneche and J.-R. Puiggali DOI: https://doi.org/10.1051/jp4:2004120033 PDF (516.7 KB)
Modelling the Marangoni convection in laser heat treatment p. 299 J.-M. Drezet, S. Pellerin, C. Bezençon and S. Mokadem DOI: https://doi.org/10.1051/jp4:2004120034 PDF (1.545 MB)
Methodology for modeling the EB-PVD coating process p. 307 L. Nastac, F.R. Dax and W. Hanusiak DOI: https://doi.org/10.1051/jp4:2004120035 PDF (294.8 KB)
Optimisation of the laser surface remelting process on strain criteria p. 315 J. Grum and R. Šturm DOI: https://doi.org/10.1051/jp4:2004120036 PDF (328.2 KB)
Optimal control strategies for the surface hardening of steel p. 325 D. Hömberg, S. Volkwein and W. Weiss DOI: https://doi.org/10.1051/jp4:2004120037 PDF (801.7 KB)
A new method for the numerical simulation of induction hardening processes p. 337 R. Pascal, P. Conraux and J.-M. Bergheau DOI: https://doi.org/10.1051/jp4:2004120038 PDF (472.9 KB)
Simulating welding with shell elements p. 347 F. Faure, J.-M. Bergheau and J.-B. Leblond DOI: https://doi.org/10.1051/jp4:2004120039 PDF (396.9 KB)
Nitriding parameters analized by neural network and genetic algorithm p. 355 T. Filetin, I. Žmak and D. Novak DOI: https://doi.org/10.1051/jp4:2004120040 PDF (240.1 KB)
Plasma spray process modelling using artificial neural networks: Application to Al2O3-TiO2 (13% by weight) ceramic coating structure p. 363 S. Guessasma, G. Montavon and C. Coddet DOI: https://doi.org/10.1051/jp4:2004120041 PDF (290.2 KB)
A model of the interface between plasma jet simulation and the simulation of coating formation during atmospheric plasma spraying (APS) p. 373 E. Lugscheider, R. Nickel and N. Papenfuß-Janzen DOI: https://doi.org/10.1051/jp4:2004120042 PDF (613.4 KB)
Computer predictions of thermo-mechanical behavior and residual stresses in spray coating process p. 381 D.-Y. Ju, V. Ji and H. Gassot DOI: https://doi.org/10.1051/jp4:2004120043 PDF (352.7 KB)
Modelling of laser induced surface modification of ceramic substrates p. 389 U. Duitsch, S. Schreck and M. Rohde DOI: https://doi.org/10.1051/jp4:2004120044 PDF (978.2 KB)
Simulation of laser cladding p. 397 J. Wilden, H. Frank, C. Theiler, T. Seefeld and G. Sepold DOI: https://doi.org/10.1051/jp4:2004120045 PDF (1.605 MB)
Modelling of laser cladding of medium carbon steel - a first approach p. 405 J. Ahlström, B. Karlsson and S. Niederhauser DOI: https://doi.org/10.1051/jp4:2004120046 PDF (766.5 KB)
Metallic thin films heated by pulsed lasers. Numerical simulation of the thermal field and the melting kinetics p. 413 N. Semmar and C. Boulmer-Leborgne DOI: https://doi.org/10.1051/jp4:2004120047 PDF (728.8 KB)
Computational modeling of electroslag remelting processes p. 421 K.M Kelkar, J. Mok, S.V. Patankar and A. Mitchell DOI: https://doi.org/10.1051/jp4:2004120048 PDF (378.0 KB)
FEM-Simulation of the electrode temperature distribution and crater formation. Part I: Breakdown of an electrical discharge p. 429 F. Soldera, A. Lasagni and F. Mücklich DOI: https://doi.org/10.1051/jp4:2004120049 PDF (534.2 KB)
FEM-Simulation of the electrode temperature distribution and crater formation. Part II: Arc and glow phases of an electrical discharge p. 439 F. Soldera and F. Mücklich DOI: https://doi.org/10.1051/jp4:2004120050 PDF (848.9 KB)
Developments in finite element simulations of continuous casting p. 447 S. Castagne, F. Pascon, G. Blès and A.-M. Habraken DOI: https://doi.org/10.1051/jp4:2004120051 PDF (1.458 MB)
Optimum process conditions based on stresses distribution and crack formation for twin roll strip casting p. 457 D.-Y. Ju and H.-Y. Zhao DOI: https://doi.org/10.1051/jp4:2004120052 PDF (1.275 MB)
Simulations of heat transfers in an autoclave. Applications to the curing of composite material parts p. 467 P. Salagnac, P. Dutournie and P. Glouannec DOI: https://doi.org/10.1051/jp4:2004120053 PDF (401.8 KB)
Model of stress-induced phase transformation and prediction of internal stresses of large steel workpieces during quenching p. 473 W. Shi, X. Zhang and Z. Liu DOI: https://doi.org/10.1051/jp4:2004120054 PDF (280.3 KB)
Influence of transformation plasticity on residual stresses and distortions due to the heat treatment of steels with different carbon contents p. 481 C. Franz, G. Besserdich, V. Schulze, H. Müller and D. Löhe DOI: https://doi.org/10.1051/jp4:2004120055 PDF (1.540 MB)
Simulation of carburizing-quenching of a gear. Effect of carbon content on residual stresses and distortion p. 489 R. Mukai and D.-Y. Ju DOI: https://doi.org/10.1051/jp4:2004120056 PDF (3.014 MB)
Computer simulation of induction surface hardening axially symmetric workpieces p. 499 D. Landek, F. Cajner and T. Filetin DOI: https://doi.org/10.1051/jp4:2004120057 PDF (316.6 KB)
FEM simulation of laser forming process of shipbuilding steel plate p. 507 Zhang Liwen, Zhong Qi, Pei Jibin, Zhang Guoliang and Xia Yuanliang DOI: https://doi.org/10.1051/jp4:2004120058 PDF (975.9 KB)
A model for the run out table cooling in a compact rolling mill p. 513 L. Hernandez, M.P. Guerrero-Malta, L.A. Leduc and R. Colas DOI: https://doi.org/10.1051/jp4:2004120059 PDF (220.8 KB)
Heat transfer coefficients for quenching process simulation p. 521 M. Maniruzzaman and R.D. Sisson Jr. DOI: https://doi.org/10.1051/jp4:2004120060 PDF (1.869 MB)
Analysis of temporal and spatial temperature gradients at pronouncedly fluctuating cooling conditions p. 529 A. Galović, M. Andrassy and S. Mudrinić DOI: https://doi.org/10.1051/jp4:2004120061 PDF (434.3 KB)
Validation of a single component gas quenching model p. 537 P.F. Stratton and A. Richardson DOI: https://doi.org/10.1051/jp4:2004120062 PDF (3.157 MB)
Numerical simulation of heat transfer in loaded heat treatment furnaces p. 545 J. Kang, Y.K. Rong and W. Wang DOI: https://doi.org/10.1051/jp4:2004120063 PDF (665.1 KB)
Fluidized bed heat treatment of aluminum cast components p. 555 D. Apelian and S.K. Chaudhury DOI: https://doi.org/10.1051/jp4:2004120064 PDF (1.731 MB)
Precipitation kinetics of NbC in ferrite of a Nb microalloyed steel p. 563 Y.-H. Choi, H.-C. Shin, C.-S. Choi and Y.-K. Lee DOI: https://doi.org/10.1051/jp4:2004120065 PDF (360.3 KB)
Using the jominy end-quench test for validation of thermo-metallurgical model parameters p. 571 M. Hunkel, Th. Lübben, F. Hoffmann and P. Mayr DOI: https://doi.org/10.1051/jp4:2004120066 PDF (354.2 KB)
Evaluation of various phase-transition models for 100Cr6 for application in commercial FEM programmes p. 581 M. Böhm, M. Hunkel, A. Schmidt and M. Wolff DOI: https://doi.org/10.1051/jp4:2004120067 PDF (873.2 KB)
Description of short time phase transformations during the heating of steels based on high-rate experimental data p. 591 T. Mioković, J. Schwarzer, V. Schulze, O. Vöhringer and D. Löhe DOI: https://doi.org/10.1051/jp4:2004120068 PDF (281.7 KB)
Experimental validation of a predictive model for numerical simulation of thermo-metallurgical phenomena during electron beam welding p. 599 M. Carin, Ph. Rogeon, D. Carron, Ph. Lemasson, D. Couedel, M. Dumons, J. Costa, R. Bertet, J.-C. Parpillon, P. Bocquet and M. Gauthier DOI: https://doi.org/10.1051/jp4:2004120069 PDF (2.052 MB)
Microstructure evolution in cold rolled strips during continuous annealing - modelling and simulation p. 607 V. Hein, H. Freydank, U. Michel, H. Zieger, G. Zouhar, P. Foerster and H. Rühl DOI: https://doi.org/10.1051/jp4:2004120070 PDF (1.162 MB)
Stress affected transformation in low alloy steels – factors limiting prediction of plastic strains p. 615 U. Ahrens, H.J. Maier and A.EL.M. Maksoud DOI: https://doi.org/10.1051/jp4:2004120071 PDF (722.4 KB)
Studies of the thermo-mechanical material response of a Boron steel by inverse modelling p. 625 P. Åkerström and M. Oldenburg DOI: https://doi.org/10.1051/jp4:2004120072 PDF (306.2 KB)
Thermal stress history in high-tensile strength steels during weld process p. 635 M. Mochizuki and M. Toyoda DOI: https://doi.org/10.1051/jp4:2004120073 PDF (2.305 MB)
Numerical modelling and physical simulation of the softening behaviour of hot work tool steels during thermal fatigue p. 649 I. Siller, W. Waldhauser and R. Ebner DOI: https://doi.org/10.1051/jp4:2004120074 PDF (883.5 KB)
Stresses in glass plate joined with other materials: Modeling and experimental validation p. 657 Y.K. Startsev DOI: https://doi.org/10.1051/jp4:2004120075 PDF (620.1 KB)
A finite volume analysis of two-dimensional transient heat transfer in TIG welding p. 669 K.T. Chaouch, H. Maza and B. Belkessa DOI: https://doi.org/10.1051/jp4:2004120076 PDF (337.3 KB)
Modelling friction stir welding with thermally coupled fluid dynamics p. 677 D. Schmitter and I.M. Zylla DOI: https://doi.org/10.1051/jp4:2004120077 PDF (511.0 KB)
Numerical simulation of inertia friction welding process of GH4169 alloy p. 681 Zhang Liwen, Liu Chengdong, Qi Shaoan, Yu Yongsi, Zhu Wenhui, Qu Shen and Wang Jinghe DOI: https://doi.org/10.1051/jp4:2004120078 PDF (450.8 KB)
Experimental validation of an electro-thermo-metallurgical predictive model in resistance spot welding p. 689 G. Sibilia, P. Rogeon, P. Paillard, G. Saindrenan, J. Soigneux, P. Lemasson and D. Carron DOI: https://doi.org/10.1051/jp4:2004120079 PDF (1.867 MB)
Experimental and numerical simulation of thermomechanical phenomena during a TIG welding process p. 697 L. Depradeux and J.-F. Jullien DOI: https://doi.org/10.1051/jp4:2004120080 PDF (580.4 KB)
Prediction of residual stresses in the heat affected zone p. 705 L. Taleb, S. Petit and J.-F. Jullien DOI: https://doi.org/10.1051/jp4:2004120081 PDF (658.4 KB)
Modeling and experimental study of induction heating of moving bronze blocks p. 713 N.P. Kandev DOI: https://doi.org/10.1051/jp4:2004120082 PDF (490.6 KB)
Modelling and experimental study of the bainitic transformation, residual stresses and deformations in the quenching process of middle alloyed steel parts p. 719 M. Veaux, S. Denis and P. Archambault DOI: https://doi.org/10.1051/jp4:2004120083 PDF (500.6 KB)
Simulation of gas quenching p. 727 F. Frerichs, Th. Lübben, U. Fritsching, H. Lohner, A. Rocha, G. Löwisch, F. Hoffmann and P. Mayr DOI: https://doi.org/10.1051/jp4:2004120084 PDF (532.2 KB)
Modeling and simulation technology for the advancement of materials processing technology p. 737 K. Funatani DOI: https://doi.org/10.1051/jp4:2004120085 PDF (165.0 KB)
Thermal influence of cutting tool coatings p. 743 J. Rech, J.L. Battaglia and A. Moisan DOI: https://doi.org/10.1051/jp4:2004120086 PDF (366.9 KB)
Application of numerical simulation of heat treatment in industry p. 753 M. Slováček DOI: https://doi.org/10.1051/jp4:2004120087 PDF (1.358 MB)
Mechanical effects of water quenching on aluminum automotive parts p. 761 P. Auburtin, N. Morin and C. Pille DOI: https://doi.org/10.1051/jp4:2004120088 PDF (2.096 MB)
Optimisation of high pressure gas quenching by application of CFD analysis p. 769 P. Schobesberger, M. Mann and M. Haigis DOI: https://doi.org/10.1051/jp4:2004120089 PDF (2.158 MB)
Three-dimensional numerical simulation of the nitriding process p. 777 P. Duranton, J. Devaux, M. Larreur, R. Fortunier and J.-M. Bergheau DOI: https://doi.org/10.1051/jp4:2004120090 PDF (535.0 KB)
Thermomechanical analysis applied to the laser beam welding simulation of aeronautical structures p. 785 C. Darcourt, J.M. Roelandt, M. Rachik, D. Deloison and B. Journet DOI: https://doi.org/10.1051/jp4:2004120091 PDF (346.5 KB)
Achieving manufacturing quality and reliability using thru-process simulation p. 793 X.L. Chen, Z. Yang, A. Nanjundan, N. Chen and J.-J. Janosch DOI: https://doi.org/10.1051/jp4:2004120092 PDF (1.704 MB)
Structure of the metallurgically oriented modelling system TK-StripCam for simulation of hot strip manufacture and application in research and production practice p. 801 U. Lotter, H.-P. Schmitz and L. Zhang DOI: https://doi.org/10.1051/jp4:2004120093 PDF (485.5 KB)
An integrated batch annealing furnace simulator p. 809 S.S. Sahay DOI: https://doi.org/10.1051/jp4:2004120094 PDF (244.2 KB)