A new constitutive model for nitrogen austenitic stainless steel p. 9 S. Fréchard, A. Lichtenberger, F. Rondot, N. Faderl, A. Redjaïmia et M. Adoum DOI: https://doi.org/10.1051/jp4:20020662 PDF (662.8 KB)
Influence of strain rate and temperature on the compressive ductility of AI, Mg and Ti alloys p. 15 E. El-Magd et M. Abouridouane DOI: https://doi.org/10.1051/jp4:20020663 PDF (573.4 KB)
A material model for anisotropic metals p. 21 T. De Vuyst, R. Vignjevic, J. Mirkovic et J. Campbell DOI: https://doi.org/10.1051/jp4:20020664 PDF (613.7 KB)
Determining the constitutive response of polymeric materials as a function of temperature and strain rate p. 27 C.M. Cady, W.R. Blumenthal, G.T. Gray III et D.J. Idar DOI: https://doi.org/10.1051/jp4:20020665 PDF (440.8 KB)
A study of the mechanical properties of PMMA and PS at strain rates of 10-4 to 103 over the temperature range 293–363 K p. 33 G.M. Swallowe et S.F. Lee DOI: https://doi.org/10.1051/jp4:20020666 PDF (330.1 KB)
Modeling of strain rates and temperature effects on the yield behavior of amorphous polymers p. 39 J. Richeton, S. Ahzi, L. Daridon et Y. Rémond DOI: https://doi.org/10.1051/jp4:20020667 PDF (282.5 KB)
Modeling the comminution and flow of granular brittle material p. 45 D.R. Curran et T. Cooper DOI: https://doi.org/10.1051/jp4:20020668 PDF (390.4 KB)
Constitutive equations at high rates of loading p. 51 J. Suvorova et I. Viktorova DOI: https://doi.org/10.1051/jp4:20020669 PDF (268.2 KB)
Stress-strain behaviour of IM7/977-2 and IM7/APC2 carbon fibre composites at low and high strain rates p. 57 D.J. Parry et F.S. Al-Hazmi DOI: https://doi.org/10.1051/jp4:20020670 PDF (438.0 KB)
Continuum damage modeling for ductile metals under high strain rate deformation p. 63 C. Husson, S. Ahzi, L. Daridon et T. Courtine DOI: https://doi.org/10.1051/jp4:20020671 PDF (293.7 KB)
Tensile and compressive properties of wrought magnesium alloys at high rates of strain p. 69 T. Yokoyama DOI: https://doi.org/10.1051/jp4:20020672 PDF (348.4 KB)
The modeling of mesodefect kinetics peculiarities on a stress wave front p. 75 O.A. Plekhov DOI: https://doi.org/10.1051/jp4:20020673 PDF (335.0 KB)
A comparison of the dynamic shear properties and fracture behaviour of continuous and pulsed current plasma arc weldments of 304L stainless steel p. 81 W.-S. Lee, C.-Y. Liu, C.-F. Lin et M.-H. Chiang DOI: https://doi.org/10.1051/jp4:20020674 PDF (899.4 KB)
Effects of strain and strain-rate on the formation of the shear band in metals p. 87 L. Qiang et M.N. Bassim DOI: https://doi.org/10.1051/jp4:20020675 PDF (686.2 KB)
Strain rate dependency of dynamic flow stress of iron in wide strain rate range p. 93 K. Sakino DOI: https://doi.org/10.1051/jp4:20020676 PDF (542.0 KB)
A modeling of visco-plastic behavior of lead and a lead alloy over a wide range of strain rate and temperature p. 99 T. Grunenwald, F. Llorca et J. Farre DOI: https://doi.org/10.1051/jp4:20020677 PDF (458.2 KB)
Constitutive relations for copper with two mechanisms including twinning for a use under shock wave loading p. 105 J. Petit et J.-L. Dequiedt DOI: https://doi.org/10.1051/jp4:20020678 PDF (454.5 KB)
Temperature, microstructure and mechanical response during shear-band formation in different metallic materials p. 111 R. Clos, U. Schreppel et P. Veit DOI: https://doi.org/10.1051/jp4:20020679 PDF (1.489 MB)
Study of high strain rate plastic deformation of low carbon microalloyed steels using experimental observation and computational modeling p. 117 J. Majta, A.K. Zurek, C.P. Trujillo et A. Bator DOI: https://doi.org/10.1051/jp4:20020680 PDF (476.5 KB)
High strain rate response of epoxy in tensile and shear loading p. 123 A. Gilat, R. K. Goldberg et G. D. Roberts DOI: https://doi.org/10.1051/jp4:20020681 PDF (231.8 KB)
Rate dependent yield and post-yield behavior of engineering polymers p. 129 Z. Major et R. W. Lang DOI: https://doi.org/10.1051/jp4:20020682 PDF (369.2 KB)
Deformation of aluminum alloys AD-1, AMg-6 and D-16 at dynamic compression and temperatures of 25-250 C p. 135 V. A. Pushkov, S. A. Novikov, V. A. Sinitsyn et I. N. Govorunov DOI: https://doi.org/10.1051/jp4:20020683 PDF (287.6 KB)
Constitutive modelling of CK45N, AlZnMgCu1.5 and Ti-6Al-4V in a wide range of strain rate and temperature p. 141 E. El-Magd, C. Treppmann et M. Korthäuer DOI: https://doi.org/10.1051/jp4:20020684 PDF (333.2 KB)
Modeling and simulation of dynamic failure in metals p. 147 L. Campagne, L. Daridon et S. Ahzi DOI: https://doi.org/10.1051/jp4:20020685 PDF (429.0 KB)
Observation of the shear failure mode in nanostructured titanium under quasistatic uniaxial compression at 300-4.2 K p. 153 E. D. Tabachnikova, V. Z. Bengus, K. Csach, J. Miskuf, V. V. Stotyarov et R. Z. Valiev DOI: https://doi.org/10.1051/jp4:20020686 PDF (651.0 KB)
Thermomechanical properties of polycarbonate under dynamic loading p. 159 V. Lerch, G. Gary et P. Hervé DOI: https://doi.org/10.1051/jp4:20020687 PDF (365.8 KB)
Structure of metal materials under bulk doping p. 165 S. Gubenko, S. Usherenko, V. Sitalo et Yu. Bunchuk DOI: https://doi.org/10.1051/jp4:20020688 PDF (916.2 KB)
Strain rate influence on yield stress of some metals p. 171 A. V. Shirokov, G. Stepanov et V. Zubov DOI: https://doi.org/10.1051/jp4:20020689 PDF (385.3 KB)
Orthotropic damage in high-strength steel sheets. An elasto-viscoplastic material model with mixed hardening p. 177 E. Omerspahic et K. Mattiasson DOI: https://doi.org/10.1051/jp4:20020690 PDF (372.8 KB)
Ductile failure of steel HY80 under high strain rates and triaxial stress states, experimental results and damage description p. 183 S. Abdel-Malek, Th. Halle et L. W. Meyer DOI: https://doi.org/10.1051/jp4:20020691 PDF (548.3 KB)
Stress-deformation behaviour of high manganese (AI, Si) TRIP and TWIP steels p. 189 L. Krüger, L. W. Meyer, U. Brûx, G. Frommeyer et O. Grässel DOI: https://doi.org/10.1051/jp4:20020692 PDF (401.8 KB)
The effect of strain rate of dynamically loaded copper on temperature accumulation p. 195 V. Barannikov et E. Nikolaeva DOI: https://doi.org/10.1051/jp4:20020693 PDF (325.1 KB)
Identification and comparison of different constitutive laws for high speed solicitation p. 201 C. Sattouf, O. Dalverny et R. Rakotomalala DOI: https://doi.org/10.1051/jp4:20020694 PDF (463.9 KB)
Constitutive modelling of a tungsten heavy metal alloy p. 207 P. Skoglund DOI: https://doi.org/10.1051/jp4:20020695 PDF (423.6 KB)
Behavior of hot dip galvanized dual phase sheet steels at high rates of deformation p. 213 T. Vuoristo, M. Apostol, V.-T. Kuokkala et P. Peura DOI: https://doi.org/10.1051/jp4:20020696 PDF (632.8 KB)
Physical-mechanical and operation characteristics of some new alloys of the Fe-Cr-C-N system p. 219 B. V. Kolev DOI: https://doi.org/10.1051/jp4:20020697 PDF (570.0 KB)
Mechanical behaviours of cement based materials at high rates of strain p. 225 A. M. Bragov, P. Demenko, L. Kruszka, A. K. Lomunov et R. Rekucki DOI: https://doi.org/10.1051/jp4:20020698 PDF (449.0 KB)
Static and dynamic response of ceramics and zirconium alumina concrete materials p. 231 F. Akopov, A. M. Bragov, P. Demenko, L. Kruszka, A. K. Lomunov, V. Mineev et L. V. Sergeichev DOI: https://doi.org/10.1051/jp4:20020699 PDF (374.7 KB)
Influence of micro-inhomogeneity of plastic deformation in metals on their strength p. 237 G. Stepanov, V. Zubov et L. Kruszka DOI: https://doi.org/10.1051/jp4:20020700 PDF (271.5 KB)
Development of the energy criterion of brittle fracture toughness for the case of combined loading p. 243 V.N. Petrov, V.V. Lepov et Hr.N. Semyonov DOI: https://doi.org/10.1051/jp4:20020701 PDF (283.7 KB)
Simulation for elasto-plastic behavior of artificial 3D-structure under shock wave loading p. 251 V. Romanova, R. Balokhonov, E. Soppa, S. Schmauder et P. Makarov DOI: https://doi.org/10.1051/jp4:20020702 PDF (811.0 KB)
Impact shear-numerical analyses of ASB evolution and failure for Ti-6AI-4V alloy p. 257 P. Chwalik, J.R. Klepaczko et A. Rusinek DOI: https://doi.org/10.1051/jp4:20020703 PDF (557.5 KB)
Dynamic upsetting and failure of metal cylinders: Experiments and analysis p. 263 D.D. Radford, S.M. Walley, P. Church et J.E. Field DOI: https://doi.org/10.1051/jp4:20020704 PDF (527.8 KB)
1-D and 2-D modeling of U-Ti alloy response in impact experiments p. 269 B. Hermann, V. Favorsky, A. Landau, D. Shvarts et E.B. Zaretsky DOI: https://doi.org/10.1051/jp4:20020705 PDF (643.7 KB)
Simulation of failure under dynamic leading at different states of triaxiality for a nickel-base superalloy p. 275 K.N. Singh, R. Sievert, H.-D. Noack, R. Clos, U. Schreppel, P. Veit, A. Hamann et D. Klingbeil DOI: https://doi.org/10.1051/jp4:20020706 PDF (974.0 KB)
Numerical simulation of damage using an elastic-viscoplastic model with directional tensile failure p. 281 I. Lomov et M.B. Robin DOI: https://doi.org/10.1051/jp4:20020707 PDF (479.4 KB)
Linear stability analysis of multiple necking in rapidly expanded thin tube p. 287 S. Mercier et A. Molinari DOI: https://doi.org/10.1051/jp4:20020708 PDF (306.1 KB)
Electromagnetic forming of aluminium alloy sheet p. 293 D.A. Oliveira et M. Worswick DOI: https://doi.org/10.1051/jp4:20020709 PDF (784.1 KB)
A numerical model to describe damage in glass under impact loading p. 299 X. Brajer, F. Hild, S. Roux et R. Gy DOI: https://doi.org/10.1051/jp4:20020710 PDF (611.8 KB)
Numerical simulation of dynamic TPB fracture test in a modified Hopkinson bar p. 305 J. Loya, J. Fernandez-Saez et C. Navarro DOI: https://doi.org/10.1051/jp4:20020711 PDF (370.0 KB)
Advanced numerical models and material characterisation techniques for composite materials subject to impact and shock wave loading p. 311 R.A. Clegg, D.M. White, C. Hayhurst, W. Ridel, W. Harwick et S. Hiermaier DOI: https://doi.org/10.1051/jp4:20020712 PDF (540.2 KB)
High strain rate model involving damage by adiabatic shear banding and related anisotropy p. 317 P. Longere, A. Dragon, H. Trumel, T. de Rességuier, X. Deprince et E. Petitpas DOI: https://doi.org/10.1051/jp4:20020713 PDF (584.0 KB)
Molecular dynamics investigations of elastic-plastic properties of solids p. 323 F.A. Sapozhnikov, V.V. Dremov et M.S. Smirnova DOI: https://doi.org/10.1051/jp4:20020714 PDF (1.088 MB)
Impact tension of sheet metals - Effect of initial specimen length p. 329 A. Rusinek et J.R. Klepaczko DOI: https://doi.org/10.1051/jp4:20020715 PDF (443.8 KB)
Experimental and numerical modeling of the heterogeneous materials fracture p. 335 V.V. Lepov, E.A. Arkhangelskaya, V.T. Alymov et V.P. Larionov DOI: https://doi.org/10.1051/jp4:20020716 PDF (1.018 MB)
Acceleration of the plates of an ERA cassette using a rigid plastic Gurney model p. 341 Y. Partom DOI: https://doi.org/10.1051/jp4:20020717 PDF (235.8 KB)
Numerical modelling of SHPB splitting tests p. 347 F. Galvez et V. Sanchez Galvez DOI: https://doi.org/10.1051/jp4:20020718 PDF (556.4 KB)
Analysis of the dynamic SHPB test using the finite element simulation p. 353 A. Gavrus, P. Caestecker, E. Ragneau et B. Davoodi DOI: https://doi.org/10.1051/jp4:20020719 PDF (582.0 KB)
Advances in fracture algorithm development in GRIM p. 359 I. Cullis, P. Church, P. Greenwood, W. Huntington-Thresher et M. Reynolds DOI: https://doi.org/10.1051/jp4:20020720 PDF (633.4 KB)
Numerical modelling of tube system nonlinear dynamics p. 365 T.N. Fesenko, A.G. Tabakov, N.V. Shariy, V.I. Sotonin et J.V. Baranov DOI: https://doi.org/10.1051/jp4:20020721 PDF (386.6 KB)
Numerical simulation of the dynamic Brazilian test on a high filled polymer p. 371 M. Quidot DOI: https://doi.org/10.1051/jp4:20020722 PDF (455.0 KB)
Numerical analysis and experimental verification of vehicle trajectories p. 377 J.W. Wekezer et K. Cichocki DOI: https://doi.org/10.1051/jp4:20020723 PDF (489.7 KB)
New testing techniques to obtain tensile stress-strain curves for a wide range of strain rates p. 385 S. Tanimura, K. Mimura et T. Umeda DOI: https://doi.org/10.1051/jp4:20020724 PDF (573.6 KB)
Model of dynamic compression tests on hydraulic testing machines: Influence of dynamic phenomena p. 391 S. Diot, A. Gavrus, D. Guines et E. Ragneau DOI: https://doi.org/10.1051/jp4:20020725 PDF (314.9 KB)
Testing with SHPB from quasi-static to dynamic strain rates p. 397 R. Othman, M.N. Bissac, P. Collet et G. Gary DOI: https://doi.org/10.1051/jp4:20020726 PDF (365.1 KB)
Speckle measurements of sample deformation in the split Hopkinsons pressure bar p. 405 S.G. Grantham, C.R. Siviour, W.G. Proud, S.M. Walley et J.E. Field DOI: https://doi.org/10.1051/jp4:20020727 PDF (555.9 KB)
Measurement of temperature coupling by thermovision and constitutive relation at high strain rates for the dual phase sheet steel p. 411 A. Rusinek, W.K. Nowacki, P. Gadaj et J.R. Klepaczko DOI: https://doi.org/10.1051/jp4:20020728 PDF (442.4 KB)
Experimental study of temperature heterogeneity in metallic materials under high strain rate sollicitation p. 417 N. Ranc, V. Pina, P. Hervé, L. Taravella et P. F. Louvigné DOI: https://doi.org/10.1051/jp4:20020729 PDF (458.5 KB)
A hydrodynamic hat specimen to investigate pressure and strain rate dependence on adiabatic shear band formation p. 423 H. Couque DOI: https://doi.org/10.1051/jp4:20020730 PDF (764.8 KB)
Experimental approach to determine dynamic plasticity of micro-materials p. 429 T. Auzanneau et C. Sato DOI: https://doi.org/10.1051/jp4:20020731 PDF (807.1 KB)
Dynamic behavior of viscous fluid at high rate of shear using through bar method p. 435 K. Ogawa DOI: https://doi.org/10.1051/jp4:20020732 PDF (351.0 KB)
A study of cellular structures under impact loading p. 441 S. Abdennadher, H. Zhao et R. Othman DOI: https://doi.org/10.1051/jp4:20020733 PDF (475.6 KB)
Experimental analysis of fresh concrete under dynamic loading p. 447 S. Pattofatto, H. Zhao et A. Poitou DOI: https://doi.org/10.1051/jp4:20020734 PDF (326.7 KB)
Analysis of the dynamic plane shear test of sheet metals at large strains p. 453 R. Merle, H. Zhao et A. Awade DOI: https://doi.org/10.1051/jp4:20020735 PDF (537.5 KB)
High temperature high strain rate testing with a compressive SHPB p. 459 M. Apostol, T. Vuoristo et V.-T. Kuokkala DOI: https://doi.org/10.1051/jp4:20020736 PDF (839.8 KB)
Damage quantification and experimental simulation of momentum trapped flyer plate and tensile split Hopkinson bar incipient failure experiments p. 465 W.R. Thissell, D.L. Tonks, E. Harstad, P. Maudlin, D. Schwartz, C.P. Trujillo et M.F. Lopez DOI: https://doi.org/10.1051/jp4:20020737 PDF (869.3 KB)
On the optimisation of machining parameters for dry drilling of aeronautic aluminium alloy p. 471 G. List et F. Girot DOI: https://doi.org/10.1051/jp4:20020738 PDF (403.9 KB)
Dynamic properties of solders and solder joints p. 477 C.R. Siviour, D.M. Williamson, S.J.P. Palmer, S.M. Walley, W.G. Proud et J.E. Field DOI: https://doi.org/10.1051/jp4:20020739 PDF (837.9 KB)
Classic and symmetric Taylor impact Tungsten alloys p. 483 R.I. Hammond, W.G. Proud et J.E. Field DOI: https://doi.org/10.1051/jp4:20020740 PDF (765.6 KB)
Measurement of the mechanical properties of car body sheet steels at high strain rates and non ambient temperature p. 489 W. Bleck et P. Larour DOI: https://doi.org/10.1051/jp4:20020741 PDF (479.4 KB)
Progress in testing sheet material at high strain rates p. 495 E. Roos et U. Mayer DOI: https://doi.org/10.1051/jp4:20020742 PDF (389.1 KB)
Measurement of the evolution of the axial strain distribution in Hopkinson specimens p. 501 P. Verleysen et J. Degrieck DOI: https://doi.org/10.1051/jp4:20020743 PDF (438.5 KB)
Peripherally clamped centrally supported blast loaded circular plates: A precision test for code validation p. 507 T.J. Cloete, R. Ahmed et G.N. Nurick DOI: https://doi.org/10.1051/jp4:20020744 PDF (747.8 KB)
A modified TAYLOR-test in combination with numerical simulations - a new approach for the determination of model parameters under dynamic loads p. 513 I. Rohr, H. Nahme et K. Thoma DOI: https://doi.org/10.1051/jp4:20020745 PDF (380.0 KB)
A new dynamic test for the identification of high speed friction law using a gas-gun device p. 519 I. Nistor, O. Pantalé, S. Caperaa et C. Sattouf DOI: https://doi.org/10.1051/jp4:20020746 PDF (401.1 KB)
Failure strain of expanding ring and its application to other expanding bodies p. 525 E. Bar-on et A. Ginsburg DOI: https://doi.org/10.1051/jp4:20020747 PDF (431.2 KB)
Rate dependent fracture toughness of plastics p. 531 Z. Major et R.W. Lang DOI: https://doi.org/10.1051/jp4:20020748 PDF (375.6 KB)
Determination of flow curves at high strain rates using the electromagnetic forming process and an iterative finite element simulation scheme p. 537 A. Brosius, C. Beerwald et M. Kleiner DOI: https://doi.org/10.1051/jp4:20020749 PDF (571.0 KB)
High strain rate testing of aluminium alloy & high speed photography p. 543 M. Lambert, C. Froustey, J.L. Charles et J.L. Lataillade DOI: https://doi.org/10.1051/jp4:20020750 PDF (834.9 KB)
Experimental study on the material dynamic fracture properties by Instrumented Charpy Impact test with single specimen method p. 551 F. Jian, D. Fulian et W. Chengzhong DOI: https://doi.org/10.1051/jp4:20020751 PDF (360.8 KB)
Dynamic experimental investigations of composites p. 559 A.N. Polilov, A.F. Melshanov, N.A. Tatous et N.A. Makhutov DOI: https://doi.org/10.1051/jp4:20020752 PDF (380.6 KB)
Numerical analysis of interruption process of dynamic tensile tests using a Hopkinson bar p. 565 R. González Lezcano, Y.E. Essa et J.L. Pérez-Castellanos DOI: https://doi.org/10.1051/jp4:20020753 PDF (513.9 KB)
Anisotropic ductile failure in titanium alloy at quasi-static and high strain rates p. 571 A.A. Mir, D.C. Barton, T.D. Andrews et P. Church DOI: https://doi.org/10.1051/jp4:20020754 PDF (286.8 KB)
Metals behavior under passage of impulse electric current p. 577 G. Stepanov, A. Babutsky et L. Krushka DOI: https://doi.org/10.1051/jp4:20020755 PDF (385.3 KB)
Localized-impact damage caused by proton bombarding in mercury target p. 583 M. Futakawa, H. Kogawa, S. Ishikura, H. Kyudo et H. Soyama DOI: https://doi.org/10.1051/jp4:20020756 PDF (654.1 KB)
Experimental method to determine fragmentation properties of materials p. 589 A.K. Zhiembetov, A.L. Mikhailov et G.S. Smirnov DOI: https://doi.org/10.1051/jp4:20020757 PDF (756.3 KB)
Modeling projectile impact onto prestressed ceramic targets p. 597 T.J. Holmquist et G.R. Johnson DOI: https://doi.org/10.1051/jp4:20020758 PDF (758.6 KB)
Experiments and simulations of penetration into granite by an aluminum shaped charge p. 603 M.J. Murphy, G. Randers-Pehrson, R.M. Kuklo, T.A. Rambur, L.L. Switzer et M.A. Summers DOI: https://doi.org/10.1051/jp4:20020759 PDF (987.1 KB)
An engineering model on penetration of eroding rods into ceramic/polymer composite p. 609 R. Zaera, A. Arias et C. Navarro DOI: https://doi.org/10.1051/jp4:20020760 PDF (353.3 KB)
Failure dynamics: New area of research p. 615 J.R. Klepaczko DOI: https://doi.org/10.1051/jp4:20020761 PDF (636.4 KB)
Armoured vehicles subject to mine explosions – an analysis method for operationability and survivability p. 621 B. Langrand, E. Deletombe, J.-L. Charles, J.-F. Sobry, S. Martin et H. Chazal DOI: https://doi.org/10.1051/jp4:20020762 PDF (945.3 KB)
Numerical and experimental study of the impact of small caliber projectiles on ballistic soap p. 627 G. Dyckmans, N. Ndompetelo et A. Chabotier DOI: https://doi.org/10.1051/jp4:20020763 PDF (701.2 KB)
High-velocity impact loading of thick GFRP blocks p. 633 H.-J. Ernst, Th. Merkel, Th. Wolf et K. Hoog DOI: https://doi.org/10.1051/jp4:20020764 PDF (960.9 KB)
High energy impact on woven laminates p. 639 J. López-Puente, R. Zaera et C. Navarro DOI: https://doi.org/10.1051/jp4:20020765 PDF (610.8 KB)
Impacts on foam stabilised composite structures: Experimental and numerical study p. 645 S. Rivallant, J.F. Ferrero et J.J. Barrau DOI: https://doi.org/10.1051/jp4:20020766 PDF (521.4 KB)
High velocity impact resistance of composite materials p. 651 Jo Justo et A. T. Marquer DOI: https://doi.org/10.1051/jp4:20020767 PDF (450.6 KB)
Wave propagation in lightweight composite armor p. 657 S. Abrate DOI: https://doi.org/10.1051/jp4:20020768 PDF (563.4 KB)
An experimental, metallurgical and modelling analysis of silver and copper explosively formed projectiles (EFPs) p. 663 J. MacMahon, P. Church, I. Cullis, S. Findlay, A. Hart et M. Wickenden DOI: https://doi.org/10.1051/jp4:20020769 PDF (811.4 KB)
Impact of shipbuilding steel plates with an initial tensile stress p. 669 V. Grolleau, L. Mahéo et G. Rio DOI: https://doi.org/10.1051/jp4:20020770 PDF (422.9 KB)
Damage and rupture of anisotropic metals for the dynamic and the crash of vehicles p. 675 P. Croix, F. Lauro, B. Bennani et J. Oudin DOI: https://doi.org/10.1051/jp4:20020771 PDF (543.1 KB)
Numerical study of the transition from rigid to eroding-rod penetration p. 681 Z. Rosenberg et E. Dekel DOI: https://doi.org/10.1051/jp4:20020772 PDF (415.3 KB)
Failure mechanisms in ductile and brittle materials during Taylor impact p. 687 D.D. Radford, G.R. Willmott, S.M. Walley et J.E. Field DOI: https://doi.org/10.1051/jp4:20020773 PDF (870.0 KB)
Impact resistance of AA6005 panels p. 693 A.H. Clausen, T. Borvik, O.S. Hopperstad et M. Langseth DOI: https://doi.org/10.1051/jp4:20020774 PDF (596.2 KB)
Prediction of the effect of temperature on impact damage in carbon/epoxy laminates p. 699 T. Gómez del Río, R. Zaera et C. Navarro DOI: https://doi.org/10.1051/jp4:20020775 PDF (544.5 KB)
Dynamic and quasi-static deformation of aluminium honeycomb sandwich panel in three point bending p. 705 H. Kobayashi, M. Daimaruya et Y. Takaya DOI: https://doi.org/10.1051/jp4:20020776 PDF (575.2 KB)
Static and dynamic fracture toughness of 25 mm thick single edge notch bend (SENB) specimen of C-Mn pressure vessel submerged arc weld metal and flaw assessment under dynamic loading p. 711 W. Xu et C.S. Wiesner DOI: https://doi.org/10.1051/jp4:20020777 PDF (304.7 KB)
Experimental and numerical study in axial crushing of thin walled sections made of high-strength steels p. 717 N. Peixinho, N. Jones et A. Pinho DOI: https://doi.org/10.1051/jp4:20020778 PDF (478.8 KB)
How the liner material metallurgical texture affects the shaped charge jet break-up time p. 723 E. Kirsch, J. Plešek et D. Gabriel DOI: https://doi.org/10.1051/jp4:20020779 PDF (507.6 KB)
Wave aspects of damage-failure transition and the problem of crack dynamics (experimental and theoretical study) p. 729 O.B. Naimark et S.V. Uvarov DOI: https://doi.org/10.1051/jp4:20020780 PDF (521.2 KB)
Determination of dynamic stress intensity factor of C/C-SiC composites p. 735 U. Mayer, K. Srivastava et K. Maile DOI: https://doi.org/10.1051/jp4:20020781 PDF (654.9 KB)
Influence of the tribological phenomenon on the tool wear in dry drilling of aluminum alloy AA2024 T351 p. 741 M. Nouari, G. List et F. Girot DOI: https://doi.org/10.1051/jp4:20020782 PDF (566.0 KB)
Bond strength of pressure sensitive adhesives for CFRP aluminium-alloy hybrid beams under impact loading p. 747 C. Sato DOI: https://doi.org/10.1051/jp4:20020783 PDF (818.1 KB)
Post shock mechanical behavior of fcc and bcc metals: Application to copper and tantalum p. 755 F. LIorca et G. Roy DOI: https://doi.org/10.1051/jp4:20020784 PDF (428.3 KB)
The influence of temperature, strain rate history and shock preloading in the region of phase transition for armco-iron p. 761 A.M. Bragov, S. Brichikov, G.T. Gray III, E. Kozlov, A.K. Lomunov, A. Petrovtsev et V. Sergeichev DOI: https://doi.org/10.1051/jp4:20020785 PDF (450.5 KB)
Dynamic properties of AerMet 100 steels to 25 GPa p. 767 L.C. Chhabildas et W.D. Reimhart DOI: https://doi.org/10.1051/jp4:20020786 PDF (407.1 KB)
Influence of shock-wave profile shape (triangulai- “Taylor-wave" versus square-topped) on the spallation response of 316L stainless steel p. 773 G.T. Gray III, N.K. Bourne, B.L. Henrie et J.C.F. Millett DOI: https://doi.org/10.1051/jp4:20020787 PDF (925.6 KB)
An investigation into spallation of titanium alloy using plate impact experiments and simulation p. 779 P. Church, I. Cullis, A. Bardilas, J. Cogar, W.G. Proud et R.I. Hammond DOI: https://doi.org/10.1051/jp4:20020788 PDF (364.5 KB)
Wide range shock wave data for polyester syntactic foams p. 785 J. Ribeiro, J. Campos, R. Mendes et I. Plaksin DOI: https://doi.org/10.1051/jp4:20020789 PDF (566.7 KB)
Measurement of strain heat in shock-loaded 304 stainless steel: Implications to powder consolidation p. 791 K.P. Staudhammer DOI: https://doi.org/10.1051/jp4:20020790 PDF (402.5 KB)
Novelties in physics of explosive welding and powder compaction p. 797 I. Plaksin, J. Campos, J. Ribeiro, R. Mendes, J. Direito, D. Braga et R. Pruemmer DOI: https://doi.org/10.1051/jp4:20020791 PDF (804.5 KB)
Dynamic compaction domain (shock compaction energy vs. ) for a Fe-15 atomic % Cu nanometric alloy obtained by mechanical alloying p. 803 R.G. Esquives, E.M. Orozco, C.T. Renero et D.V. Jaramillo DOI: https://doi.org/10.1051/jp4:20020792 PDF (1.006 MB)
Multiscale modelling for equations of state p. 809 D. Porter et P.J. Gould DOI: https://doi.org/10.1051/jp4:20020793 PDF (449.5 KB)
On the dynamic response of four polymers p. 815 N.K. Bourne, G.T. Gray III et J.C.F. Millett DOI: https://doi.org/10.1051/jp4:20020794 PDF (471.8 KB)
Laser shock techniques to investigate shock-induced phase transitions in quartz p. 821 T. de Rességuier, P. Berterretche, M. Hallouin et J.P. Petitet DOI: https://doi.org/10.1051/jp4:20020795 PDF (442.2 KB)
Reshock behavior of silicon carbide p. 827 D.P. Dandekar, W.D. Reinhart et L.C. Chhabildas DOI: https://doi.org/10.1051/jp4:20020796 PDF (360.7 KB)
Shock properties of diamond and kimberlite p. 833 G.R. Willmott, W.G. Proud et J.E. Field DOI: https://doi.org/10.1051/jp4:20020797 PDF (686.4 KB)
Impact response of titanium alloys at elevated temperatures p. 839 G.I. Kanel, S.V. Razorenov, E.B. Zaretsky et B. Hermann DOI: https://doi.org/10.1051/jp4:20020798 PDF (441.8 KB)
Validation of a fracture model based on mesoscale approach for spalling of hard steel and aluminium alloy p. 845 X. Boidin, P. Chevrier et J.R. Klepaczko DOI: https://doi.org/10.1051/jp4:20020799 PDF (472.4 KB)
Laser shock compression of copper monocrystals: Mechanisms for dislocation and void generation p. 851 M.A. Meyers, M.S. Schneider, B.K. Kad, V.A. Lubarda, F. Gregori, D.H. Kalantar et B.A. Remington DOI: https://doi.org/10.1051/jp4:20020800 PDF (546.2 KB)
Dynamic properties of nitrogen alloyed 1045 iron-carbon-steel p. 857 E. Lach, H. Nahme et I. Rohr DOI: https://doi.org/10.1051/jp4:20020801 PDF (490.4 KB)
Experimental study of A36 steel spall fracture p. 863 A.K. Zurek, J. Mata, E. Cerreta et C.P. Trujillo DOI: https://doi.org/10.1051/jp4:20020802 PDF (720.4 KB)
Effect of shock wave hardening and cold working on mechanical properties of a new high nitrogen steel p. 869 E. Lach, A. Lichtenberger et F. Rondot DOI: https://doi.org/10.1051/jp4:20020803 PDF (1.040 MB)
Response of iron to two symmetric laser shocks p. 875 T. de Rességuier et M. Hallouin DOI: https://doi.org/10.1051/jp4:20020804 PDF (860.1 KB)
Shock wave experiments using a pulsed electron beam to study copper and molybdenum thermoelastic responses p. 881 F. Malaise, R. Courchinoux, B. Cassany et J.-M. Chevalier DOI: https://doi.org/10.1051/jp4:20020805 PDF (369.7 KB)
Asymmetric collapse and micro-jetting in shock wave propagation in porous materials p. 887 J. Ribeiro, J. Campos, I. Plaksin, R. Mendes et J. Góis DOI: https://doi.org/10.1051/jp4:20020806 PDF (692.2 KB)
Coalescence rate model for ductile damage in metals p. 893 D.L. Tonks, A.K. Zurek et W.R. Thissell DOI: https://doi.org/10.1051/jp4:20020807 PDF (380.9 KB)
Anomalous diffusion increase in steel under shock loading p. 899 S.A. Atroshenko DOI: https://doi.org/10.1051/jp4:20020808 PDF (740.2 KB)
Kinetics of mesostructure and reloading behavior of dynamically compressed solids p. 905 T.A. Khantuleva, Yu.I. Mescheryakov et A.K. Divakov DOI: https://doi.org/10.1051/jp4:20020809 PDF (425.9 KB)
Effect of shock-induced mesoscopic processes on dynamic strength of solids p. 911 Yu.I. Mescheryakov DOI: https://doi.org/10.1051/jp4:20020810 PDF (387.2 KB)
Evidences of ductile and brittle responses of ceramics under shock wave loading p. 917 E.B. Zaretsky, V.E. Paris, G.I. Kanel et A.S. Savinykh DOI: https://doi.org/10.1051/jp4:20020811 PDF (346.4 KB)
Phase transformations in Ni3AI, Ti3AI and Ti2AINb intermetallics under shock-wave loading p. 923 N.V. Kasantseva, B.A. Greenberg, A.A. Popov et E.V. Shorokhov DOI: https://doi.org/10.1051/jp4:20020812 PDF (1.066 MB)
On the Strength of γ-titanium aluminides during shock loading p. 929 J.C.F. Millett, N.K. Bourne, G.T. Gray III et I.P. Jones DOI: https://doi.org/10.1051/jp4:20020813 PDF (534.1 KB)
Explosive treatment application for production of metal-polymer composite materials p. 935 V.N. Goulbin, N.A. Adamenko, Y.P. Trykov, A.V. Fetisov et A.V. Kazurov DOI: https://doi.org/10.1051/jp4:20020814 PDF (247.0 KB)
Using dynamic methods for compaction of particulate composite materials p. 941 V. Popov, S. Kaloshkin, A. Aksenov, V.N. Goulbin et V. Ivanov DOI: https://doi.org/10.1051/jp4:20020815 PDF (1.664 MB)
C