Journal de Physique IV

Accès gratuit

Foreword

Foreword p. III

I. Sochet

Résumé

Flame acceleration and DDT in gas explosions p. 3

S.B. Dorofeev

DOI: https://doi.org/10.1051/jp4:20020261

Detonation propagation limits in homogeneous and heterogeneous systems p. 11

H. Matsui

DOI: https://doi.org/10.1051/jp4:20020262

Accidental gaseous deflagrations: Modelling, scaling and mitigation p. 19

V.V. Molkov

DOI: https://doi.org/10.1051/jp4:20020263

Dust explosion vent sizing – Current methods and future developments p. 31

F. Tamanini

DOI: https://doi.org/10.1051/jp4:20020264

Ignition of dust layer by constant heat flux p. 47

K. Lebecki, Z. Dyduch, A. Fibich et J. Sliz

DOI: https://doi.org/10.1051/jp4:20020265

Influence of initial pressure on cork dust/air mixtures explosibility p. 53

R. Pilao, E. Ramalho et C. Pinhoinst

DOI: https://doi.org/10.1051/jp4:20020266

Propagating brush discharge initiation of dust layers – A new test method p. 65

C.J. Dahn et A.G. Dastidar

DOI: https://doi.org/10.1051/jp4:20020267

Self-ignition of dusts at reduced volume fractions of oxygen p. 71

U. Krause et M. Schmidt

DOI: https://doi.org/10.1051/jp4:20020268

Laser ignition of dust clouds p. 79

Ch. Proust

DOI: https://doi.org/10.1051/jp4:20020269

Quantitative description of lifting and ignition of organic fuel dusts in shock waves p. 89

AV. Fedorov et Yu.A. Gosteev

DOI: https://doi.org/10.1051/jp4:20020270

Numerical simulations of dust lifting under the action of shock wave propagating along the near-wall layer p. 97

AV. Fedorov et N.N. Fedorova

DOI: https://doi.org/10.1051/jp4:20020271

Shock wave ignition of aluminum particles p. 105

H. Tao

DOI: https://doi.org/10.1051/jp4:20020272

Modelling of flow and combustion behind shock waves propagating along dust layers in long ducts p. 113

V.P. Korobeinikov, I.V. Semenov, I.S. Menshov, R. Klemens, P. Wolanski et P. Kosinski

DOI: https://doi.org/10.1051/jp4:20020273

Explosion resistance of a square plate with a square hole p. 121

G. Li, B.-Z. Chen, X.-F. Deng et R.K. Eckhoff

DOI: https://doi.org/10.1051/jp4:20020274

Potential of mathematical modelling in large-scale dust explosions p. 125

P. Kosinski, R. Klemens et P. Wolanski

DOI: https://doi.org/10.1051/jp4:20020275

Explosibility assessment of dusts produced in the recycling process of electrical appliances p. 133

M. Nifuku, J. Gatineau, C. Barre, I. Sochet et H. Katoh

DOI: https://doi.org/10.1051/jp4:20020276

Modeling and simulation of coal dust explosions p. 141

S. Zhong, A. Teodorczyk, X. Deng et J. Dang

DOI: https://doi.org/10.1051/jp4:20020277

Studies of dust explosion suppression by water sprays and extinguishing powders p. 149

M. Gieras et R. Klemens

DOI: https://doi.org/10.1051/jp4:20020278

Influence of length-to-diameter ratio and static activation pressure on pressure generation and flame propagation in vented gas explosions p. 157

M. Scheid et U. Krause

DOI: https://doi.org/10.1051/jp4:20020279

The new IEC standard for pressurised electrical equipment enclosures for areas containing combustible dust. A self-contradiction? p. 165

R.K. Eckhoff

DOI: https://doi.org/10.1051/jp4:20020280

Explosion vents are a protective means of last resort. How must the constructional protective technique explosion venting for silos in the industry be applied? p. 171

V. Grosskopf

DOI: https://doi.org/10.1051/jp4:20020281

An inherent safety framework for dust explosion prevention and mitigation p. 189

P.R. Amyotte et F.I. Khan

DOI: https://doi.org/10.1051/jp4:20020282

How the combination of “chemistry” and “engineering” determine dust and gas explosion behaviour: Educating science and engineering students and training industrial professionals in practical gas and dust explosion theory p. 197

S.M. Lemkowitz, A. Pekalski, H.J. Pasman et J.F. Zevenbergen

DOI: https://doi.org/10.1051/jp4:20020283

Explosion protection reconstruction design in two CaC₂ powder processes p. 199

D. Junxiang, Z. Shenjun et D. Xufan

DOI: https://doi.org/10.1051/jp4:20020284

Maximum experimental safe gap of binary and ternary mixtures p. 207

E. Brandes et T. Redeker

DOI: https://doi.org/10.1051/jp4:20020285

Development of an automated flammability burner system p. 215

F. Bu, P.R. Amyotte et M.J. Pegg

DOI: https://doi.org/10.1051/jp4:20020286

Prediction of ignition hazard during turbulent gas mixing by using a Lagrangian approach p. 223

A. Gourara, F. Roger, J.M. Most, H.Y. Wang, V. Naudet, F. Illy et O. Louédin

DOI: https://doi.org/10.1051/jp4:20020287

Spared behavior of explosion in closed space p. 231

A. Miura, T. Mizukaki, T. Shiraishi, A. Matsuo, K. Takayama et I. Nojiri

DOI: https://doi.org/10.1051/jp4:20020288

Explosion modeling with a CFD software: AUTOREAGAS p. 239

A. Champassith et P. Pourcel

DOI: https://doi.org/10.1051/jp4:20020289

Simulation of gas explosions with a Matlab version of the Random Choice Method (RCM) p. 247

D. Bjerketvedt, K. Vaagsaether, K. Kristoffersen, A. Mjaavatten, G. Thomas et R. Bambrey

DOI: https://doi.org/10.1051/jp4:20020290

Accidental explosions of semiconductor manufacturing gases in Japan p. 253

T. Hirano

DOI: https://doi.org/10.1051/jp4:20020291

Experimental investigation of the overpressure generated by a low energy plasma igniter p. 259

J. Caillard, C. de Izarra, L. Brunet, Ph. Gillard et O. Vallée

DOI: https://doi.org/10.1051/jp4:20020292

Influence of mixture composition on the oscillatory behaviour of flames propagating from the closed end toward the open end of smooth horizontal tubes p. 265

B. Veyssière, M. Arrigoni et S. Kerampran

DOI: https://doi.org/10.1051/jp4:20020293

Deflagrations of non-uniform mixtures: A first experimental approach p. 273

I. Sochet, F. Guelon et P. Gillard

DOI: https://doi.org/10.1051/jp4:20020294

Active control of combustion oscillations for premixed combustion systems p. 281

A.K. Hayashi, Y. Yamazaki, T. Mizuno, S. Ogawa, T. Yamamoto, S. Kagiya et T. Motegi

DOI: https://doi.org/10.1051/jp4:20020295

Water vapor suppression to tubular flame p. 291

A.K. Hayashi, S. Nakano, N. Saito, C. Liao et T. Tsuruda

DOI: https://doi.org/10.1051/jp4:20020296

Evaluation of dinitration energetic and kinetic parameters in a calorimetric reactor p. 299

L. Balland, J.-M. Cosmao, J.-P. Hebert, L. Estel et O. Besnard

DOI: https://doi.org/10.1051/jp4:20020297

Computer-aided reaction engineering software for virtual educational laboratorium on chemical kinetics and thermodynamics of combustion and explosion p. 307

I.A. Kirillov

DOI: https://doi.org/10.1051/jp4:20020298

Flame acceleration in a tube with variable cross-section p. 317

M.S. Kuznetsov, V.I. Alekseev, Yu.G. Yankin et S.B. Dorofeev

DOI: https://doi.org/10.1051/jp4:20020299

Applicability of a flame arrester to rich methane-based mixtures p. 325

P. Bauer

DOI: https://doi.org/10.1051/jp4:20020300

Run-up distances to supersonic flames in obstacle-laden tubes p. 333

A. Veser, W. Breitung et S.B. Dorofeev

DOI: https://doi.org/10.1051/jp4:20020301

The influence of confinement geometry on deflagration to detonation transition in gases p. 341

N.N. Smirnov et V.F. Nikitin

DOI: https://doi.org/10.1051/jp4:20020302

Induction time in multi-fuels system. Effect of small additives of ozone and hydrogen peroxide on hydrogen-air detonation p. 353

A.A. Vasil'ev, A.E. Magzurmov, I.A. Kirillov et V.D. Rusanov

DOI: https://doi.org/10.1051/jp4:20020303

Investigation of deflagrations and detonations in pipes and flames arresters by high-speed framing p. 363

H. Föster et C. Kersen

DOI: https://doi.org/10.1051/jp4:20020304

The selection of the effective blast reduction method when detonating explosives p. 371

B.E. Gelfand et M.V. Silnikov

DOI: https://doi.org/10.1051/jp4:20020305

Numerical study on the formation of spray cloud by explosive dispersal of water filled in V-shaped trough p. 377

J.C. Liu, J. Ding, Y.T. Hu et L.F. Xie

DOI: https://doi.org/10.1051/jp4:20020306

Suppression of secondary explosions in transformer rooms p. 385

O.R. Hansen, A. Wiik et B. Wilkins

DOI: https://doi.org/10.1051/jp4:20020307

Risk evaluation of methyl ethyl ketone peroxide and mixtures with sulfuric acid p. 393

X. Li, H. Koseki, Y. Iwata, J.-W. Choi et Y.-S. Mok

DOI: https://doi.org/10.1051/jp4:20020308

Modelling of detonation wave parameters, initiation and hazard of chemically active bubble systems p. 403

P.A. Fomin, K. Mitropetros, H. Hieronymus et J. Steinbach

DOI: https://doi.org/10.1051/jp4:20020309

Problems of fire and explosion safety in context of sustainable development p. 413

V.S. Babkin, V.A. Bunev et V.I. Gritzan

DOI: https://doi.org/10.1051/jp4:20020310

The dependence of initial pressure for the autoignition temperature about flammable liquid p. 423

H. Itagaki

DOI: https://doi.org/10.1051/jp4:20020311

Experimental and numerical investigation of kerosene flammability p. 429

I. Sochet, J.-M. Pascaud et P. Gillard

DOI: https://doi.org/10.1051/jp4:20020312

Stability of 2D two-phase reactive flows p. 437

Yu.B. Radvogin, V.S. Posvyanskii et S.M. Frolov

DOI: https://doi.org/10.1051/jp4:20020313

Laminar flame velocity determination for H₂-air-steam mixtures using the spherical bomb method p. 445

N. Lamoureux, N. Djebaili-Chaumeix et C.E. Paillard

DOI: https://doi.org/10.1051/jp4:20020314

Aluminum agglomeration in composite solid propellants combustion p. 453

S.A. Rashkovsky

DOI: https://doi.org/10.1051/jp4:20020315

Mechanisms of flame propagation through suspended combustible particles p. 459

R. Dobashi et K. Senda

DOI: https://doi.org/10.1051/jp4:20020316

Study of laser sensitivity of nonel tube p. 467

W. Menchum, L. Dabin et H. Zhongqi

DOI: https://doi.org/10.1051/jp4:20020317

Explosion simulations in industrial risk studies using 3D CFD coupled with structural analysis p. 473

A. Tripathi et S. Tripathi

DOI: https://doi.org/10.1051/jp4:20020318

Journal de Physique IV (Proceedings)

Volume 12 / Numéro 7 (August 2002)