Journal de Physique IV

High Purity in Steels as a Criterion for Materials Development p. C7-3

H. Jacobi et F. Rakoski

DOI: https://doi.org/10.1051/jp4:1995701

"Why do we Need to Measure Trace Elements in Steel ?" p. C7-23

J.J. Dufrane

DOI: https://doi.org/10.1051/jp4:1995702

Some Examples of Industrial Applications of Ultra-High Purity Steels p. C7-33

P. Bocquet, A. Cheviet et E. Varcin

DOI: https://doi.org/10.1051/jp4:1995703

The Flow Stress of High-Purity Refractory Body-Centred Cubic Metals and its Modification by Atomic Defects p. C7-45

A. Seeger

DOI: https://doi.org/10.1051/jp4:1995704

The Influence of Directed Alloying and Thermomechanical Treatment on the Structure and Mechanical Properties of High-Purity Chromium, Molybdenum and Tungsten p. C7-67

Y. Milman

DOI: https://doi.org/10.1051/jp4:1995705

Hot Ductility and High Temperature Microstructure of High Purity Iron Alloys p. C7-77

K. Abiko

DOI: https://doi.org/10.1051/jp4:1995706

Thermochemical Interactions Versus Site Competition in Grain Boundary Segregation and Embrittlement in Multicomponent Systems p. C7-85

M. Guttmann

DOI: https://doi.org/10.1051/jp4:1995707

Alpha Rays Emitting Impurities in Ultra Pure Aluminum Evolution Through the Successive Refining Steps p. C7-99

M. Leroy

DOI: https://doi.org/10.1051/jp4:1995708

Impurity and Stoichiometry Effects in the Preparation and Mechanical Properties of Intermetallic NiAl Single Crystals p. C7-111

A. Köthe, W. Löser, A. Güth, G. Vaerst et K. Mai

DOI: https://doi.org/10.1051/jp4:1995709

High Temperature Intermetallic Compounds Ni₃Al p. C7-123

M. Kursa, L. Hypeská, J Drápala,, T Kárník et M. Losertová

DOI: https://doi.org/10.1051/jp4:1995710

Incorporation of Refractory Metals into Niobium Base Alloys p. C7-129

A. Antoni-Zdziobek, J. Driole et F. Durand

DOI: https://doi.org/10.1051/jp4:1995711

Extraction of Indium From Sulphate Solutions with D2EHPA Solutions Using Static Mixers p. C7-135

N. Nacevski, F. Poposka et B. Nikov

DOI: https://doi.org/10.1051/jp4:1995712

Preparation of High Purity Metals by Crystallization Methods p. C7-143

J. Drápala, L. Kuchar et M. Kursa

DOI: https://doi.org/10.1051/jp4:1995713

High-Purity Chromium Targets p. C7-149

A.P. Rudoy, Yu.V. Milman et N.P. Korzhova

DOI: https://doi.org/10.1051/jp4:1995714

Purification of Ultra-High Purity Aluminum p. C7-153

E. Hashimoto, Y. Ueda et T. Kino

DOI: https://doi.org/10.1051/jp4:1995715

A New Induction Heating Floating-Zone Refining Furnace for Ultrapurification of Iron-Chromium Alloys p. C7-159

S. Takaki, Y. Ashino, Y. Morimoto, M. Tanino et K. Abiko

DOI: https://doi.org/10.1051/jp4:1995716

Activation Analysis Applied to High Purity Metals and Alloys p. C7-167

M. Fedoroff, J.C. Rouchaud et P. Benaben

DOI: https://doi.org/10.1051/jp4:1995717

Analysis of Carbon and Nitrogen in High-Purity α-Iron by Magnetic After-Effect Measurements p. C7-175

M. Hirscher, F. Walz et M. Weller

DOI: https://doi.org/10.1051/jp4:1995718

Surface Characterization for High Purity Fe-Cr Alloys p. C7-181

H. Iwai, R. Oiwa, S. Takaki et K. Abiko

DOI: https://doi.org/10.1051/jp4:1995719

Trace Element Analysis of Steels and Nickel Alloys by Atomic Spectrometry p. C7-189

A. Osojnik, M. Renko, T. Drglin et Z. Torkar

DOI: https://doi.org/10.1051/jp4:1995720

Characterization of High Purity bcc Metals by Mechanical Spectroscopy p. C7-199

M. Weller

DOI: https://doi.org/10.1051/jp4:1995721

Boron Heterogeneities in As-Cast FeAl Intermetallics p. C7-205

G. Kobylanski et J. Le Coze

DOI: https://doi.org/10.1051/jp4:1995722

High Purity Chromium Metal Oxygen Distribution (Determined by XPS and EPMA) p. C7-211

K. Suzuki et H. Tomioka

DOI: https://doi.org/10.1051/jp4:1995723

The Development of Double-Oriented Silicon Steel with Cube Orientation p. C7-219

A. Sakakura

DOI: https://doi.org/10.1051/jp4:1995724

Influence of Antimony on the Texture and Properties of 2% Si, 0.3% Al Steel for Non-Oriented Sheet p. C7-225

M. Jenko, F. Vodopivec, H.J. Grabke, H. Viefhaus, M. Godec et D. Steiner Petrovic

DOI: https://doi.org/10.1051/jp4:1995725

Grain Growth and Grain Boundary Wetting Phase Transitions in the Al-Ga and Al-Sn-Ga Alloys of High Purity p. C7-233

B. Straumal, S. Risser, V. Sursaeva, B. Chenal et W. Gust

DOI: https://doi.org/10.1051/jp4:1995726

Quantitative Description of the Evolution in the Geometry of Grains in a Pure α-Fe p. C7-243

K.J. Kurzydlowski et M. Janicki

DOI: https://doi.org/10.1051/jp4:1995727

The Effect of the Trace Elements Additions on the Character of the Grain Boundary Population in High Purity α-iron p. C7-247

M. Tacikowski, J. Le Coze, J. Driver et A. Kobylanski

DOI: https://doi.org/10.1051/jp4:1995728

Recovery and Grain Growth in a 2% Si - 0.3% Al - 0.003%C Steel p. C7-255

D. Steiner Petrovic, F. Vodopivec et M. Jenko

DOI: https://doi.org/10.1051/jp4:1995729

The Influence of Nb and Ti on the Recrystallization of UHP Iron p. C7-259

P. Jouffrey et J.H. Driver

DOI: https://doi.org/10.1051/jp4:1995730

Experimental Determination of the Miscibility Gap in High Purity Iron-Chromium Alloys p. C7-265

V. Nika et J. Bigot

DOI: https://doi.org/10.1051/jp4:1995731

Influence of Small Amounts of Boron on the Structural Evolution of Nanocrystalline Ni₃Al During Thermal Treatments p. C7-271

A. Korznikov, O. Dimitrov, A. Quivy, G. Korznikova, J. Devaud et R. Valiev

DOI: https://doi.org/10.1051/jp4:1995732

Radiation-Induced α' Phase Formation on Dislocation Loops in Fe-Cr Alloys During Electron Irradiation p. C7-277

E. Wakai, A. Hishinuma, Y. Kato, H. Yano, S. Takaki et K. Abiko

DOI: https://doi.org/10.1051/jp4:1995733

Anisotropy of Electrical Resistivity in High-Purity Aluminium Single Crystals p. C7-287

Y. Ueda, E. Hashimoto, H. Tamura et T. Kino

DOI: https://doi.org/10.1051/jp4:1995734

Ductility of Ultra High Purity Copper p. C7-295

S. Fujiwara et K. Abiko

DOI: https://doi.org/10.1051/jp4:1995735

Role of Carbon, Nickel and Iron Impurities on the Properties of the U-0.2% V Alloys p. C7-301

C. Thiebaut, C. Bonnet et J.-M. Morey

DOI: https://doi.org/10.1051/jp4:1995736

Temperature and Orientation Dependence of Yield Stress and Plasticity in Molybdenum Single Crystals of High Purity p. C7-307

D.V. Lotsko et Yu.V. Milman

DOI: https://doi.org/10.1051/jp4:1995737

High-Temperature Brittleness and Interfacial Segregation in Tin Bronzes p. C7-315

W. Ozgowicz et M. Biscondi

DOI: https://doi.org/10.1051/jp4:1995738

Influence of Trace Elements on Hot Ductility of an Ultra High Purity Invar Alloy p. C7-323

M.T. Perrot-Simonetta et A. Kobylanski

DOI: https://doi.org/10.1051/jp4:1995739

Effect of Phosphorus on Hot Ductility of High Purity Iron p. C7-335

K. Abiko, C.-M. Liu, M. Ichikawa, H. Suenaga et M. Tanino

DOI: https://doi.org/10.1051/jp4:1995740

Influence of Sulphur and Phophorus on the Hot Deformation of Fe-Cr 13% High Purity Steel p. C7-341

M. Lahreche, B. Bouzabata et A. Kobylanski

DOI: https://doi.org/10.1051/jp4:1995741

Hot Ductility of a Microalloyed Steel in the Intermediate Temperature Range p. C7-347

A. Darsouni, B. Bouzabata et F. Montheillet

DOI: https://doi.org/10.1051/jp4:1995742

The Effects of Reactive Elements on the Oxidation of Alumina-Forming Iron-Chromium-Aluminium Alloys at High Temperature p. C7-357

J. Deakin, V. Prunier, G.C. Wood et F.H. Stott

DOI: https://doi.org/10.1051/jp4:1995743

Effects of Al Addition and Minor Elements on Oxidation Behaviour of FeCr Alloys p. C7-365

J.-M. Herbelin et M. Mantel

DOI: https://doi.org/10.1051/jp4:1995744

Effects of Ceria Coatings on Pure Iron Oxidation. Comparison with Extra Low Carbon Steels p. C7-375

H. Buscail, C. Courty et J.-P. Larpin

DOI: https://doi.org/10.1051/jp4:1995745

On the Influence of Yttrium and Sulphur on the High Temperature Oxidation Behaviour of Alumina-Forming High Purity FeCrAl Alloys p. C7-381

A. Glazkov, M. Göbel, J. Jedlinski, J. Schimmelpfennig, G. Borchardt, S. Weber, S. Scherrer et J. Le Coze

DOI: https://doi.org/10.1051/jp4:1995746

Fatigue of High Purity Copper Wire p. C7-389

N. Tanabe, A. Kurosaka, K. Suzuki et O. Kohno

DOI: https://doi.org/10.1051/jp4:1995747

Stress Corrosion Cracking Sensitivity of High Purity Fe-Cr Alloys in High Temperature Water p. C7-397

H. Takaku, S. Kato, J. Tani et K. Abiko

DOI: https://doi.org/10.1051/jp4:1995748

Influence of Carbon and Nitrogen on Corrosion Resistance of High Purity Fe-50mass % Cr Alloy p. C7-403

Y. Kato, T. Ujiro, S. Satoh, K. Yamato et K. Abiko

DOI: https://doi.org/10.1051/jp4:1995749

Use of Pure Metals to Analyse Hydrogen Electrochemical Permeation in Steels p. C7-409

P. Manolatos, J. Le Coze, C. Duret-Thual et M. Jérome

DOI: https://doi.org/10.1051/jp4:1995750

Pitting Resistance of Pure Fe-17%Cr Alloys : Consequences for Localized Corrosion Modeling p. C7-415

C. Boulleret, J.-L. Pastol, J. Bigot, B. Baroux et D. Gorse

DOI: https://doi.org/10.1051/jp4:1995751

Influence of Silicon, Carbon and Phosphorus on Intergranular Corrosion of High Purity Austenitic Stainless Steels Under Transpassive Conditions p. C7-423

J. Stolarz

DOI: https://doi.org/10.1051/jp4:1995752

Surprising Intergranular "Non-Corrosion" of a 304L Stainless Steel p. C7-429

Le Thi Quynh Anh et J. Le Coze

DOI: https://doi.org/10.1051/jp4:1995753

Le Journal de Physique IV

Volume 05 / Numéro C7 (Novembre 1995)

Second International Conference on Ultra High Purity Base MetalsUHPM - 95