| Issue |
J. Phys. IV France
Volume 07, Number C1, Mars 1997
7th INTERNATIONAL CONFERENCE ON FERRITES
|
|
|---|---|---|
| Page(s) | C1-309 - C1-310 | |
| DOI | https://doi.org/10.1051/jp4:19971121 | |
7th INTERNATIONAL CONFERENCE ON FERRITES
J. Phys. IV France 07 (1997) C1-309-C1-310
DOI: 10.1051/jp4:19971121
1 Magnetic & Electronic Materials Laboratory, Hitachi Metals Ltd, 5200 Mikajiri, Kumagaya City, Saitama Pref., Japan
2 Kumagaya Works, Hitachi Metals Ltd, 5200 Mikajiri, Kumagaya City, Saitama Pref., Japan
© EDP Sciences 1997
J. Phys. IV France 07 (1997) C1-309-C1-310
DOI: 10.1051/jp4:19971121
Hot Isostatic Pressing in Oxygen of Ferrite Magnet
Y. Ogata1, H. Iwasaki1, Y. Kubota1, M. Yamamoto2, T. Iimura1 and T. Shinohara11 Magnetic & Electronic Materials Laboratory, Hitachi Metals Ltd, 5200 Mikajiri, Kumagaya City, Saitama Pref., Japan
2 Kumagaya Works, Hitachi Metals Ltd, 5200 Mikajiri, Kumagaya City, Saitama Pref., Japan
Abstract
The effect of hot isostatic pressing in 5%O2-95%Ar on the magnetic properties of Sr ferrite magnet was studied. It was found that the size of voids at grain boundaries are decreased by hot isostatic pressing without substantial grain growth and the density of isostatically hot-pressed body is about 5.03x103kg/m3. Magnetic measurement revealed that the hot isostatic pressing does not significantly decrease coercive force and keeps the good squareness of B-H curve of pre-sintered body unchanged. The typical value of residual flux density Br of the isostatically hot-pressed magnet is 0.438T.
© EDP Sciences 1997