Numéro
J. Phys. IV France
Volume 10, Numéro PR9, September 2000
EURODYMAT 2000 - 6th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading
Page(s) Pr9-75 - Pr9-80
DOI https://doi.org/10.1051/jp4:2000913
EURODYMAT 2000 - 6th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading

J. Phys. IV France 10 (2000) Pr9-75-Pr9-80

DOI: 10.1051/jp4:2000913

Evaluation of constitutive relations for high strain rate behaviour using the Taylor test

J. Buchar1, M. Forejt2, M. Jopek2 and I. Krivanek1

1  Mendel University of Agriculture and Forestry, Zemedelska 1, 61300 Brno, Czech Republic
2  Faculty of Mechanical Engineering, Department of Forming, Technical University of Brno, Technická 2, 600000 Brno, Czech Republic


Abstract
Taylor tests have been performed on specimens of ten metallic materials. The different one - dimensional models have been used. In the next step the finite element code LS DYNA has been used in order to deduce the parameters in the Johnson - Cook constitutive equations. Using of the mutual comparison of the computed specimen profile with experimental one led to the explanation of the influence of the parameters mentioned above on the deformation behaviour determined by the computation. This procedure also made possible to choose the constitutive equation which represents the optimum estimation of material behaviour at high strain rates.



© EDP Sciences 2000