| Numéro |
J. Phys. IV France
Volume 08, Numéro PR2, June 1998
Soft Magnetic Materials 13
|
|
|---|---|---|
| Page(s) | Pr2-643 - Pr2-646 | |
| DOI | https://doi.org/10.1051/jp4:19982149 | |
Soft Magnetic Materials 13
J. Phys. IV France 08 (1998) Pr2-643-Pr2-646
DOI: 10.1051/jp4:19982149
1 Dipartimento di Ingegneria Elettrica Industriale, Politecnico di Torino, Cso. Duca degli Abruzzi 24, 10129 Torino, Italy
2 Istituto Elettrotecnico Nazionale Galileo Ferraris, Cso. Massimo d'Azeglio 42, 10125 Torino, Italy
© EDP Sciences 1998
J. Phys. IV France 08 (1998) Pr2-643-Pr2-646
DOI: 10.1051/jp4:19982149
Influence of the parameters of power electronic supply on iron losses
A. Boglietti1, O. Bottauscio2, M. Chiampi1 and M. Repetto11 Dipartimento di Ingegneria Elettrica Industriale, Politecnico di Torino, Cso. Duca degli Abruzzi 24, 10129 Torino, Italy
2 Istituto Elettrotecnico Nazionale Galileo Ferraris, Cso. Massimo d'Azeglio 42, 10125 Torino, Italy
Abstract
The paper investigates the influence of the parameters of the PWM electronic supply on iron losses in ferromagnetic sheets. The analysis is developed both by a numerical model and by experimental investigations on a NO SiFe 2.5%wt 0.65 mm lamination. The numerical approach is based on Finite Element Method and uses the dynamic Preisach model of hysteresis. The measures are performed on an Epstein frame setup. The good agreement between computations and experiments allows the validation of the model, useful for a successive deeper analysis of different PWM supply conditions.
© EDP Sciences 1998