Numéro |
J. Phys. IV France
Volume 07, Numéro C1, Mars 1997
7th INTERNATIONAL CONFERENCE ON FERRITES
|
|
---|---|---|
Page(s) | C1-417 - C1-418 | |
DOI | https://doi.org/10.1051/jp4:19971168 |
7th INTERNATIONAL CONFERENCE ON FERRITES
J. Phys. IV France 07 (1997) C1-417-C1-418
DOI: 10.1051/jp4:19971168
1 Commissariat à l'Énergie Atomique, Centre d'Études Scientifiques et Techniques d'Aquitaine, BP. 2, 33114 Le Barp, France
2 Commissariat à l'Énergie Atomique, Centre d'Études du Ripault, BP. 16, 37260 Monts, France
© EDP Sciences 1997
J. Phys. IV France 07 (1997) C1-417-C1-418
DOI: 10.1051/jp4:19971168
Control of Ferrites Microwave Properties at the French Atomic Energy Commission - Manufacturing Process and Characterization
N. Bardy1, G. Leblevennec1, D. Le Potier2 and J. Authesserre21 Commissariat à l'Énergie Atomique, Centre d'Études Scientifiques et Techniques d'Aquitaine, BP. 2, 33114 Le Barp, France
2 Commissariat à l'Énergie Atomique, Centre d'Études du Ripault, BP. 16, 37260 Monts, France
Abstract
Depending on the desired performances of ferrites, their microwave characteristics must be optimized. Ferrite elaboration relies on highly reproducible compositions and microstructures. In order to fulfil these requirements, manufacturers have to control all the different processing parameters. The selection of the compositional gradation as well as the manufacturing procedure, require accurate and reliable microwave measurement data. A special process has therefore been developed for complex permittivity and permeability measurements. Closely related compositions of ferrites can thus be distinguished and experimental data can be interpreted on the basis of theoretical models.
© EDP Sciences 1997