Journal de Physique IV

What Can the Concept of a Perfect Chemoelastic Solid Tell us about the Mechanical and Thermodynamic Behaviour of a Solid ? p. C1-03

F.C. Larché

DOI: https://doi.org/10.1051/jp4:1996101

Deformation through Transformations p. C1-11

A.L. Roytburd

DOI: https://doi.org/10.1051/jp4:1996102

Computing Microstructures p. C1-27

M. Chipot

DOI: https://doi.org/10.1051/jp4:1996103

Landau Theory in Kinetics of the CuAu First-Order Phase Transition p. C1-35

S. Dorfman, D. Fuks et A. Gordon

DOI: https://doi.org/10.1051/jp4:1996104

Evolution of Layered Structures in a Gradient-Dependent Viscoplastic Material p. C1-45

C. Faciu et A. Molinari

DOI: https://doi.org/10.1051/jp4:1996105

Phase Transitions in Inelastic Materials at Finite Strains: A Local Description p. C1-55

V.I. Levitas

DOI: https://doi.org/10.1051/jp4:1996106

Some Results in Non-Linear Physics of Martensitic Transformation p. C1-65

O. Naimark et L.V. Filimonova

DOI: https://doi.org/10.1051/jp4:1996107

Structural Mechanism of Close-Packed Polytypes Formation at Displacive Type Phase Transformation in Alloys p. C1-75

A.I. Ustinov

DOI: https://doi.org/10.1051/jp4:1996108

Influence of Stresses on Precipitation p. C1-87

G. Sauthoff

DOI: https://doi.org/10.1051/jp4:1996109

Phase Transformation Kinetics and Mechanisms in Titanium Alloys Ti-6.2.4.6,ß-CEZ and Ti-10.2.3 p. C1-99

S. Bein et J. Béchet

DOI: https://doi.org/10.1051/jp4:1996110

Influence of Heating Rate and Carbon Concentration on the Mechanical Properties of Carbon Steels p. C1-109

L. Cau, M.N. Abdelaziz, W. Kaluba et G. Mesmacque

DOI: https://doi.org/10.1051/jp4:1996111

Internal Mismatch Stresses in Nickel-Based Superalloys : A Finite Element Approach p. C1-119

A. Hazotte, A. Racine et S. Denis

DOI: https://doi.org/10.1051/jp4:1996112

Symmetry-Induced Deformation and Reconstructive Phase Transformation in Metal-Oxide Interface : The Fe (001) example p. C1-129

L. Lahoche, V. Lorman, J.M. Roelandt et S.B. Rochal

DOI: https://doi.org/10.1051/jp4:1996113

Mathematical vs. Experimental Stress Analysis of Inhomogeneities in Solids p. C1-139

W.H. Müller

DOI: https://doi.org/10.1051/jp4:1996114

Inhomogeneity of Phase Transformations β→ω and β→α in the Quenched Cold-Rolled Alloy Zr-20 %Nb p. C1-149

Yu. Perlovich, H.J. Bunge, V. Fesenko, M. Isaenkova, N.J. Park, L. Wcislak et M. Zuev

DOI: https://doi.org/10.1051/jp4:1996115

Considering Stress-Phase Transformation Interactions in the Calculation of Heat Treatment Residual Stresses p. C1-159

S. Denis

DOI: https://doi.org/10.1051/jp4:1996116

Numerical Simulation of Soda-Lime Silicate Glass Tempering p. C1-175

H. Carre et L. Daudeville

DOI: https://doi.org/10.1051/jp4:1996117

Evaluation of Cladding Residual Stresses in Clad Blocks by Measurements and Numerical Simulations p. C1-187

P. Dupas et D. Moinereau

DOI: https://doi.org/10.1051/jp4:1996118

Martensitic Transformation Development in the Rolled Ti-Ni Alloy : Varying of Temperature Parameters Depending on Grain Orientation p. C1-197

V. Fesenko et Yu. Perlovich

DOI: https://doi.org/10.1051/jp4:1996119

Modelling of Electromagnetic Heating, Cooling and Phase Transformations during Surface Hardening of Steels p. C1-203

A. Jacot, M. Swierkosz, J. Rappaz, M. Rappaz et D. Mari

DOI: https://doi.org/10.1051/jp4:1996120

On the α→γ Transformation During Dynamic Thermal Cycles p. C1-215

W.J. Kaluba, R. Taillard, K. Jozwiak et J. Foct

DOI: https://doi.org/10.1051/jp4:1996121

A Finite Element Calculation for the Design of Devices Made of Shape Memory Alloys p. C1-225

S. Leclercq, C. Lexcellent et J.C. Gelin

DOI: https://doi.org/10.1051/jp4:1996122

Finite Element Simulations of Internal Stresses Generated During the Ferroelastic Deformation of NiTi Bodies p. C1-235

P.Y. Manach, D. Favier et G. Rio

DOI: https://doi.org/10.1051/jp4:1996123

Retained Austenite in the C.G.H.A.Z. of 0.1 wt% C Si-alloyed Steels p. C1-245

R. Taillard, P. Verrier et T. Maurickx

DOI: https://doi.org/10.1051/jp4:1996124

A Thermo-Metallurgical Model for Steel Cooling Behaviour : Proposition, Validation and Comparison with the Sysweld's Model p. C1-255

F. Waeckel, P. Dupas et S. Andrieux

DOI: https://doi.org/10.1051/jp4:1996125

Martensitic Transformation and Residual Stresses after Thermomechanical Treatment of Heat Treatable Steel 42CrMo4 (SAE 4140) p. C1-265

A. Weise et G. Fritsche

DOI: https://doi.org/10.1051/jp4:1996126

Micromechanical Modelling of Superelasticity in Shape Memory Alloys p. C1-277

E. Patoor, A. Eberhardt et M. Berveiller

DOI: https://doi.org/10.1051/jp4:1996127

A Phenomenological three Dimensional Model for Pseudoelastic Behavior of Shape Memory Alloys p. C1-293

P. Delobelle et C. Lexcellent

DOI: https://doi.org/10.1051/jp4:1996128

Drum- and -Disc-Engine with Shape Memory Wires p. C1-301

F.-U. Glasauer et I. Müller

DOI: https://doi.org/10.1051/jp4:1996129

Phase Transitions in Elastoplastic Materials : Thermodynamical Theory and Numerical Simulation p. C1-309

V.I. Levitas, E. Stein et A.V. Idesman

DOI: https://doi.org/10.1051/jp4:1996130

Theory of Martensitic Unelasticity of Crystals p. C1-321

V.A. Likhachev

DOI: https://doi.org/10.1051/jp4:1996131

A Model of Material with Phase Change and Applications p. C1-335

Z. Moumni et Q.S. Nguyen

DOI: https://doi.org/10.1051/jp4:1996132

Phenomenological Constitutive Equations for Numerical Simulations of SMA's Structures. Effects of Thermomechanical Couplings p. C1-347

R. Peyroux, A. Chrysochoos, C. Licht et M. Löbel

DOI: https://doi.org/10.1051/jp4:1996133

On Transformation Pathways of General Stress Controlled Thermoelastic Martensitic Transformation in Shape Memory Alloys p. C1-357

P. Sittner, M. Takakura, Y. Hara et M. Tokuda

DOI: https://doi.org/10.1051/jp4:1996134

On the Unified Micromechanics Constitutive Description of One-Way and Two-Way Shape Memory Effects p. C1-367

Q.-P. Sun et C. Lexcellent

DOI: https://doi.org/10.1051/jp4:1996135

Thermomechanical Properties of Shape Memory Polymers of Polyurethane Series and their Applications p. C1-377

H. Tobushi, S. Hayashi, A. Ikai et H. Hara

DOI: https://doi.org/10.1051/jp4:1996136

Thermomechanical Properties of TiNi Shape Memory Alloy p. C1-385

H. Tobushi, A. Ikai, S. Yamada, K. Tanaka et C. Lexcellent

DOI: https://doi.org/10.1051/jp4:1996137

FEM-Analysis of the One-Dimensional Coupled Thermomechanical Problem of TiNi SMA p. C1-395

A. Ziólkowski et B. Raniecki

DOI: https://doi.org/10.1051/jp4:1996138

Transformation Plasticity and Toughening p. C1-407

G.B. Olson

DOI: https://doi.org/10.1051/jp4:1996139

Incremental Micromechanical Modelling of the Transformation Induced Plasticity p. C1-419

J.M. Diani, M. Berveiller et H. Sabar

DOI: https://doi.org/10.1051/jp4:1996140

Martensitic Transformation Under Loading and the Mechanical Properties of Iron Alloys p. C1-429

E.I. Estrin

DOI: https://doi.org/10.1051/jp4:1996141

Structure/Deformation Relationship in a ß Metastable Ti-Alloy p. C1-435

T. Grosdidier, C. Roubaud, M.-J. Philippe, S. Zaefferer, M. Zandona, E. Gautier et Y. Combres

DOI: https://doi.org/10.1051/jp4:1996142

Micromechanics of Transformation-Induced Plasticity and Variant Coalescence p. C1-445

F. Marketz, F.D. Fischer et K. Tanaka

DOI: https://doi.org/10.1051/jp4:1996143

Transformation Thermomechanics of Alloy Materials in the Process of Martensitic Transformation : A Unified Theory p. C1-455

K. Tanaka, F. Nishimura, F.D. Fischer et E.R. Oberaigner

DOI: https://doi.org/10.1051/jp4:1996144

Experimental Study of the Transformation-Induced Plasticity in a Cr-Ni-Mo-Al-Ti Steel p. C1-465

J.-C. Videau, G. Cailletaud et A. Pineau

DOI: https://doi.org/10.1051/jp4:1996145

Computer Simulation of Martensitic Transformation Under Stress p. C1-475

Y.H. Wen, S. Denis et E. Gautier

DOI: https://doi.org/10.1051/jp4:1996146

Le Journal de Physique IV

Volume 06 / Numéro C1 (Janvier 1996)

MECAMAT'95International Seminar on Mechanics and Mechanisms of Solid-Solid Phase Transformations