| Numéro |
J. Phys. IV France
Volume 05, Numéro C8, Décembre 1995
International Conference on Martensitic Transformations – ICOMAT 95
|
|
|---|---|---|
| Page(s) | C8-463 - C8-468 | |
| DOI | https://doi.org/10.1051/jp4:1995870 | |
International Conference on Martensitic Transformations
ICOMAT 95
J. Phys. IV France 05 (1995) C8-463-C8-468
DOI: 10.1051/jp4:1995870
1 Department of Aerospace Engineering, Tokyo Metropolitan Institute of Technology, Asahigaoka 6-6, J-193 Hino, Tokyo, Japan
2 Department of Mechanical Engineering, Aichi Institute of Technology, Yagusa, J-470-03 Toyota, Japan
3 Institute of Mechanics, University for Mining and Metallurgy, A-8700 Leoben, Austria
© EDP Sciences 1995
ICOMAT 95
J. Phys. IV France 05 (1995) C8-463-C8-468
DOI: 10.1051/jp4:1995870
Thermomechanical Behavior of an Fe-Based Shape Memory Alloy : Transformation Conditions and Hystereses
K. Tanaka1, F. Nishimura1, H. Tobushi2, E.R. Oberaigner3 and F.D. Fischer31 Department of Aerospace Engineering, Tokyo Metropolitan Institute of Technology, Asahigaoka 6-6, J-193 Hino, Tokyo, Japan
2 Department of Mechanical Engineering, Aichi Institute of Technology, Yagusa, J-470-03 Toyota, Japan
3 Institute of Mechanics, University for Mining and Metallurgy, A-8700 Leoben, Austria
Abstract
Transformation/thermomechanical behavior in an
Fe-9%Cr-5%Ni-l4%Mn-6%Si polycrystalline shape memory alloy during
thermomechanical loading is investigated. The transformation lines in the
stress-temperature plane are strongly influenced by the parameters
characterizing the thermomechanical loading. The transformation start
condition, the martensite start stress and the austenite start temperature, is
carefully measured to compare the results with the other experimental and
theoretical observations. The stress-strain-temperature hysteresis loops, full
and sub, are determined during cyclic loading.
© EDP Sciences 1995