Numéro |
J. Phys. IV France
Volume 04, Numéro C3, Février 1994
36ème Colloque de Métallurgie de l'INSTNCHANGEMENTS DE PHASES ET MICROSTRUCTURES |
|
---|---|---|
Page(s) | C3-279 - C3-284 | |
DOI | https://doi.org/10.1051/jp4:1994338 |
36ème Colloque de Métallurgie de l'INSTN
CHANGEMENTS DE PHASES ET MICROSTRUCTURES
J. Phys. IV France 04 (1994) C3-279-C3-284
DOI: 10.1051/jp4:1994338
1 Laboratoire de Science et Génie des Matériaux Métalliques, Ecole des Mines, Parc de Saurupt, 54042 Nancy cedex, France
2 Linköping Institute of Technology, 58183 Linköping, Sweden
© EDP Sciences 1994
CHANGEMENTS DE PHASES ET MICROSTRUCTURES
J. Phys. IV France 04 (1994) C3-279-C3-284
DOI: 10.1051/jp4:1994338
Mechanical behaviour of Fe-C alloys during phase transformations
E. GAUTIER1, S. DENIS1, Ch. LIEBAUT1, S. SJÖSTRÖM2 and A. SIMON11 Laboratoire de Science et Génie des Matériaux Métalliques, Ecole des Mines, Parc de Saurupt, 54042 Nancy cedex, France
2 Linköping Institute of Technology, 58183 Linköping, Sweden
Abstract
The mechanical behaviour of Fe-C alloys have been determined in their phase transformation ranges during isothermal or anisothermal transformations. Two models an analytical model and a finite element model have been used in order to calculate the behaviour of the material. Considering a macroscopic scale, these models show that the mechanical behaviour can be well described when an additional deformation, i.e. the transformation plasticity deformation, is considered.
© EDP Sciences 1994