| Numéro |
J. Phys. IV France
Volume 03, Numéro C9, Décembre 1993
Proceedings of the 3rd International Symposium on High Temperature Corrosion and Protection of MaterialsActes du 3ème Colloque International sur la Corrosion et la Protection des Matériaux à Haute Température |
|
|---|---|---|
| Page(s) | C9-635 - C9-642 | |
| DOI | https://doi.org/10.1051/jp4:1993967 | |
Proceedings of the 3rd International Symposium on High Temperature Corrosion and Protection of Materials
Actes du 3ème Colloque International sur la Corrosion et la Protection des Matériaux à Haute Température
J. Phys. IV France 03 (1993) C9-635-C9-642
DOI: 10.1051/jp4:1993967
1 Corrosion Science & Engineering Department, Indian Institute of Technology, Bombay - 400 076, India
2 Indira Gandhi Centre for Atomic Research, Kalpakkam, India
3 Fraunhofer Institute for Lasertechnik, Aachen, Germany
© EDP Sciences 1993
Actes du 3ème Colloque International sur la Corrosion et la Protection des Matériaux à Haute Température
J. Phys. IV France 03 (1993) C9-635-C9-642
DOI: 10.1051/jp4:1993967
Oxidation resistance of plasma coated and laser treated mild steel
A.S. Khanna1, R.K. Singh Raman2 and E.W. Kreutz31 Corrosion Science & Engineering Department, Indian Institute of Technology, Bombay - 400 076, India
2 Indira Gandhi Centre for Atomic Research, Kalpakkam, India
3 Fraunhofer Institute for Lasertechnik, Aachen, Germany
Abstract
Stainless steel powder was coated on mild steel substrate using plasma coating. The porous coating thus obtained was modified using laser irradiation. The oxidation behaviour of the plasma coated as well as laser treated material was studied in air at 1073 K. There was considerable decrease in oxidation rate of mild steel after plasma coating as expected. In addition the oxidation resistance improved significantly after laser treatment. Various laser parameters influence the coating characteristics. Their effect on coating composition and on oxidation rate is discussed.
© EDP Sciences 1993