| Numéro |
J. Phys. IV France
Volume 03, Numéro C7, Novembre 1993
The 3rd European Conference on Advanced Materials and ProcessesTroisiéme Conférence Européenne sur les Matériaux et les Procédés Avancés |
|
|---|---|---|
| Page(s) | C7-1129 - C7-1134 | |
| DOI | https://doi.org/10.1051/jp4:19937175 | |
The 3rd European Conference on Advanced Materials and Processes
Troisiéme Conférence Européenne sur les Matériaux et les Procédés Avancés
J. Phys. IV France 03 (1993) C7-1129-C7-1134
DOI: 10.1051/jp4:19937175
University of Twente, Department of Mechanical Engineering, P.O. Box 217, 7500 AE Enschede, The Netherlands
© EDP Sciences 1993
Troisiéme Conférence Européenne sur les Matériaux et les Procédés Avancés
J. Phys. IV France 03 (1993) C7-1129-C7-1134
DOI: 10.1051/jp4:19937175
Application of numerical simulation in design and control of forming processes
J. HUÉTINK and H.G. MOOIUniversity of Twente, Department of Mechanical Engineering, P.O. Box 217, 7500 AE Enschede, The Netherlands
Abstract
A short overview is given of the development of the mixed Eulerian-Lagrangian formulation as a combination of the pure Eulerian and pure Lagrangian formulation. Emphasis is laid upon the formulation for forming processes, where the updating of material variables is important. Convection is added to the original Lagrangian method. Shortly, smoothing, the constitutive behaviour and a method to accelerate steady state calculations are treated. Two applications are shown : a rolling and an extrusion problem.
© EDP Sciences 1993