| Issue |
J. Phys. IV France
Volume 10, Number PR9, September 2000
EURODYMAT 2000 - 6th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Page(s) | Pr9-243 - Pr9-248 | |
| DOI | https://doi.org/10.1051/jp4:2000941 | |
EURODYMAT 2000 - 6th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading
J. Phys. IV France 10 (2000) Pr9-243-Pr9-248
DOI: 10.1051/jp4:2000941
1 Institute of Fundamental Technological Research, Polish Academy of Sciences, Swietokrzyska 21, 00-049 Warsaw, Poland
2 Military University of Technology, Kaliskiego 2, Warsaw, Poland
© EDP Sciences 2000
J. Phys. IV France 10 (2000) Pr9-243-Pr9-248
DOI: 10.1051/jp4:2000941
Measurements of temperature during dynamic shear deformation of carbon steel
W. Oliferuk1, L. Kruszka2 and W.K. Nowacki11 Institute of Fundamental Technological Research, Polish Academy of Sciences, Swietokrzyska 21, 00-049 Warsaw, Poland
2 Military University of Technology, Kaliskiego 2, Warsaw, Poland
Abstract
In the present paper the modification of the method of temperature measurements on the basis of infrared (IR) radiation detection is presented. The modification was carried out in order to satisfy the conditions of the dynamic shear with strain rate about 5 . 103 s-1. Owing to stopping the horizontal prism in the scanning system of the IR Camera, the frequency of a line of thermovision image has been reached 1.6 kHz. The theoretical ground of calibration procedure of the temperature rneasurement system is given.
© EDP Sciences 2000