Issue
J. Phys. IV France
Volume 04, Number C8, Septembre 1994
EURODYMAT 1994 - 4th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading
Page(s) C8-707 - C8-712
DOI https://doi.org/10.1051/jp4:19948108
EURODYMAT 1994 - 4th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading

J. Phys. IV France 04 (1994) C8-707-C8-712

DOI: 10.1051/jp4:19948108

Dynamic properties and spall plane formation of brass

H. Nahme1 and M.J. Worswick2

1  Ernst-Mach-Institute, Eckerstrasse 4, 79104 Freiburg, Germany
2  Carleton University, Department of Mechanical and Aerospace Engineering, C. J. Mackenzie Building, Ottawa, Canada, KIS 5B6


Résumé
Pour mieux comprendre les processus de la formation des fissures y compris la nucléation des cavités, la croissance et la coalescence et l'évolution des fissures, des expériences d'impacts de plaque ont été effectués en combinaison avec la technique VISAR. Une attention particulière a été portée aux conditions de l'impact autour du seuil de écaillage. Trois types des échantillons du laiton contenant du plomb ont été choc-chargés au niveau de contrainte 0.85 Gpa < σ < 3.8 GPa. Des données d'Hugoniot ont été obténues par des courbes vitesse - temps. Des échantillons récupérés ont été examinés par des méthodes métallographiques et par la microscopie électronique à balayage. Les données des matériaux dynamiques servent de données d'entrée pour les calculs 2D LS-DYNA en utilisant un modèle de comportement basé sur la fonction d'écroussage de Gurson.


Abstract
For a better understanding of crack forming processes including void nucleation, growth and coalescence and the evolution of cracks, planar plate impact experiments in combination with VISAR- technique have been performed. Special attention was focused to impact conditions around the spall threshold. Three types of lead-containing brass samples were shock loaded to stress levels 0.85 Gpa < σ < 3.8 GPa. From the measured velocity-time-histories Hugoniot data were obtained. Recovered samples have been examined by means of metallographic methods and scanning electron microscopy. The dynamic material data serve as input data for LS-DYNA 2D-calculations employing a Gurson-based constitutive model.



© EDP Sciences 1994