Numéro |
J. Phys. IV France
Volume 03, Numéro C9, Décembre 1993
Proceedings of the 3rd International Symposium on High Temperature Corrosion and Protection of MaterialsActes du 3ème Colloque International sur la Corrosion et la Protection des Matériaux à Haute Température |
|
---|---|---|
Page(s) | C9-797 - C9-805 | |
DOI | https://doi.org/10.1051/jp4:1993983 |
Proceedings of the 3rd International Symposium on High Temperature Corrosion and Protection of Materials
Actes du 3ème Colloque International sur la Corrosion et la Protection des Matériaux à Haute Température
J. Phys. IV France 03 (1993) C9-797-C9-805
DOI: 10.1051/jp4:1993983
1 EPRI, 3412 Hillview Avenue Pa10 Alto, California 94303 U.S.A.
2 Lawrence Berkeley Laboratory, University of California, Berkeley, California, U.S.A.
3 Battelle Columbus Laboratories, 505 King Avenue, Columbus, Ohio, 43201, U.S.A.
4 Western Research Institute, 365 N. 9th Street, PO Box 3395, Laramie, Wyoming 82071, U.S.A.
© EDP Sciences 1993
Actes du 3ème Colloque International sur la Corrosion et la Protection des Matériaux à Haute Température
J. Phys. IV France 03 (1993) C9-797-C9-805
DOI: 10.1051/jp4:1993983
Effect of process variables on wastage in fluidized bed combustors: criteria for test procedures
John Stringer1, Stuart S. MacAdam2, Ian G. Wright3 and Vijay K. Sethi41 EPRI, 3412 Hillview Avenue Pa10 Alto, California 94303 U.S.A.
2 Lawrence Berkeley Laboratory, University of California, Berkeley, California, U.S.A.
3 Battelle Columbus Laboratories, 505 King Avenue, Columbus, Ohio, 43201, U.S.A.
4 Western Research Institute, 365 N. 9th Street, PO Box 3395, Laramie, Wyoming 82071, U.S.A.
Abstract
Wastage of in-bed components in bubbling fluidized-bed combustors (FBC) has been a continuing problem. In response to this, there have been a number of attempts recently to develop testing techniques to help in the selection of resistant alloys and coating to resist wastage, and to determine the effect of critical process variables on the wastage. This paper summarizes what is known about the wastage in operating FBCs, to provide a basis for the qualification of the testing techniques.
© EDP Sciences 1993