Accès gratuit
| Numéro |
J. Phys. IV France
Volume 01, Numéro C4, Novembre 1991
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATION AND SHAPE MEMORY PROPERTIES
|
|
|---|---|---|
| Page(s) | C4-163 - C4-168 | |
| DOI | https://doi.org/10.1051/jp4:1991425 | |
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATION AND SHAPE MEMORY PROPERTIES
J. Phys. IV France 01 (1991) C4-163-C4-168
DOI: 10.1051/jp4:1991425
1 S.G.M. P.O. Box 8039, 7550 KA, Hengelo (O), The Netherlands
2 Foundation for Advanced Metals Science, Enschede, The Netherlands
© EDP Sciences 1991
J. Phys. IV France 01 (1991) C4-163-C4-168
DOI: 10.1051/jp4:1991425
ASSESSMENT OF THE DURATION OF TIME REQUIRED FOR CONVENTIONAL Ti-Ni SINTERING
N. ZHANG1, P. BABAYAN KHOSROVABADI2, J.H. LINDENHOVIUS2 and B.H. KOLSTER21 S.G.M. P.O. Box 8039, 7550 KA, Hengelo (O), The Netherlands
2 Foundation for Advanced Metals Science, Enschede, The Netherlands
Abstract
Elemental blends of Ti-Ni powder in the Ti50Ni50 ratio were tested by the conventional press and sintered method. The sintering conditions employed were based on solid-state diffusion which resulted in a homogeneous alloy exhibiting the shape-memory effect. An attempt has been made to establish a mathematical model to predict the time required for complete homogenization. The comparison of the calculated values with that of the experimental results revealed consistency.
© EDP Sciences 1991