| Numéro |
J. Phys. IV France
Volume 08, Numéro PR2, June 1998
Soft Magnetic Materials 13
|
|
|---|---|---|
| Page(s) | Pr2-713 - Pr2-716 | |
| DOI | https://doi.org/10.1051/jp4:19982166 | |
Soft Magnetic Materials 13
J. Phys. IV France 08 (1998) Pr2-713-Pr2-716
DOI: 10.1051/jp4:19982166
1 Faculty of Engineering, Oita University, 700 Dannoharu, Oita 870-11, Japan
2 Steel Research Laboratories, Nippon Steel Corporation, 20-1 Shintomi, Futtu, Chiba 293, Japan
© EDP Sciences 1998
J. Phys. IV France 08 (1998) Pr2-713-Pr2-716
DOI: 10.1051/jp4:19982166
Local iron loss distribution in a grain-oriented 3% silicon steel sheet. Two dimensional magnetic measurement
M. Enokizono1, I. Tanabe1 and T. Kubota21 Faculty of Engineering, Oita University, 700 Dannoharu, Oita 870-11, Japan
2 Steel Research Laboratories, Nippon Steel Corporation, 20-1 Shintomi, Futtu, Chiba 293, Japan
Abstract
This paper presents the distributions of local magnetic properties in a grain-oriented silicon steel sheet (23ZH) without insulator coating, measured by using the two-dimensional magnetic sensor. It is well known that the local distributions of the flux density B and the field strength H in a grain-oriented silicon steel sheet are not uniform due to orientation. The properties, namely, the H-vector, the B-vector, the hysteresis loop and the iron losses are depending on the local orientation in a grain. The result shows the relationship between the magnetic properties and the grain structure in the specimen.
© EDP Sciences 1998