TEXTURE DEVELOPMENT AND TEXTURE INHOMOGENEITIES IN A HOT-ROLLED CuZnAl SHAPE MEMORY ALLOY

N.J. PARK; H.J. BUNGE

doi:doi:10.1051/jp4:1991448

Accès gratuit

Numéro		J. Phys. IV France Volume 01, Numéro C4, Novembre 1991 EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATION AND SHAPE MEMORY PROPERTIES


Page(s)		C4-323 - C5-328
DOI		https://doi.org/10.1051/jp4:1991448

EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATION AND SHAPE MEMORY PROPERTIES

J. Phys. IV France 01 (1991) C4-323-C5-328
DOI: 10.1051/jp4:1991448

TEXTURE DEVELOPMENT AND TEXTURE INHOMOGENEITIES IN A HOT-ROLLED CuZnAl SHAPE MEMORY ALLOY

N.J. PARK and H.J. BUNGE

Department of Physical Metallurgy, TU Clausthal Grosser Bruch 23, D-3392 Clausthal-Zellerfeld, Germany

Abstract
The texture development in a hot rolled Cu-14.2wt.%Zn-5.6wt.%Al in the surface and centre of the sheet was studied. The observed texture in the centre of the sheet can be understood in terms of the {001}(011) and {211}(011) hot rolling texture in the austenite phase and the reported crystallographic orientation relationships between monoclinic martensite and b.c.c. austenit. In the surface of the sheet the texture was developed with the influence of shear deformation. Therefore in the martensitic phase only the orientation components were observed which were originated from the {001}(011) of the b.c.c. phase. Besides the variant selection of the crystal orientation was observed during the pahse transformation in the surface of the sheet.