Observation and modeling of dynamic recrystallization in high-strain, high-strain rate deformation of metals
J. Phys. IV France, 10 PR9 (2000) Pr9-51-Pr9-56
Article cité par
La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).
Article cité :
Citations de cet article :
Enhancing edge integrity of high-strength steels by high-speed blanking to achieve improved crashworthiness
Olaf Schrage, Roald Lingbeek, Priidu Peetsalu, Marlon Hahn, Hamed Dardaei Joghan, Yannis P. Korkolis and A. Erman TekkayaAdvances in Industrial and Manufacturing Engineering 12 100181 (2026)
https://doi.org/10.1016/j.aime.2026.100181
Differences in ballistic performance induced by building direction of additively manufactured 316L stainless steel cylindrical projectiles
Hao Xue, Tao Wang, Xin-yu Cui, Zi-qi Luo and Guang-yan HuangEngineering Failure Analysis 169 109223 (2025)
https://doi.org/10.1016/j.engfailanal.2024.109223
Dynamic microstructure evolution in cold sprayed Ni Ti composite coatings
Roghayeh Nikbakht, Mohammad Saadati, Hamid Assadi, Kamal Jahani and Bertrand JodoinSurface and Coatings Technology 421 127456 (2021)
https://doi.org/10.1016/j.surfcoat.2021.127456
Recrystallization behaviour of cubic boron nitride under high pressure
Jiawei Zhang, Fangming Liu, Shuaiqi Li, Hao Liang, Shixue Guan, Junpu Wang, Yi Tian, Mengxi Zhao and Duanwei HeJournal of the European Ceramic Society 41 (16) 132 (2021)
https://doi.org/10.1016/j.jeurceramsoc.2021.09.036
Microstructural softening induced adiabatic shear banding in Ti-23Nb-0.7Ta-2Zr-O gum metal
Silu Liu, Y.Z. Guo, Z.L. Pan, X.Z. Liao, E.J. Lavernia, Y.T. Zhu, Q.M. Wei and Yonghao ZhaoJournal of Materials Science & Technology 54 31 (2020)
https://doi.org/10.1016/j.jmst.2020.03.042
The Influence of the Microstructure of an HHA Steel on the Formation of Adiabatic Shear Bands, after High Deformation Rates
Suzane de Sant’ana Oliveira, Ricardo Pondé Weber, Andersan dos Santos Paula and Sergio Neves MonteiroMaterials Science Forum 1012 366 (2020)
https://doi.org/10.4028/www.scientific.net/MSF.1012.366
Experimental and numerical analyses of microstructure evolution of Cu-Cr-Zr alloys during severe plastic deformation
E.N. Borodin, A. Morozova, V. Bratov, A. Belyakov and A.P. JivkovMaterials Characterization 156 109849 (2019)
https://doi.org/10.1016/j.matchar.2019.109849
Strain localization and dynamic recrystallization in polycrystalline metals: thermodynamic theory and simulation framework
Charles K.C. Lieou, Hashem M. Mourad and Curt A. BronkhorstInternational Journal of Plasticity (2019)
https://doi.org/10.1016/j.ijplas.2019.03.005
Non-equilibrium approach to prediction of microstructure evolution for metals undergoing severe plastic deformation
E.N. Borodin and V. BratovMaterials Characterization 141 267 (2018)
https://doi.org/10.1016/j.matchar.2018.05.002
Dynamic recrystallization in adiabatic shear banding: Effective-temperature model and comparison to experiments in ultrafine-grained titanium
Charles K.C. Lieou and Curt A. BronkhorstInternational Journal of Plasticity 111 107 (2018)
https://doi.org/10.1016/j.ijplas.2018.07.011
Microstructure and Mechanical Properties of Laser Solid Formed Ti-6Al-4V Alloy Under Dynamic Shear Loading
Ping Zhou, Wei-Guo Guo, Yu Su, et al.Journal of Materials Engineering and Performance 26 (7) 3121 (2017)
https://doi.org/10.1007/s11665-017-2748-x
Chip formation and microstructure evolution in the adiabatic shear band when machining titanium metal matrix composites
Roland Bejjani, Marek Balazinski, Helmi Attia, Philippe Plamondon and Gilles L’ÉspéranceInternational Journal of Machine Tools and Manufacture 109 137 (2016)
https://doi.org/10.1016/j.ijmachtools.2016.08.001
Comparison of dislocation density based approaches for prediction of defect structure evolution in aluminium and copper processed by ECAP
V. Bratov and E.N. BorodinMaterials Science and Engineering: A 631 10 (2015)
https://doi.org/10.1016/j.msea.2015.02.019
Crystal plasticity modeling of the dynamic recrystallization of two-phase titanium alloys during isothermal processing
Hongwei Li, Chuan Wu and He YangInternational Journal of Plasticity 51 271 (2013)
https://doi.org/10.1016/j.ijplas.2013.05.001
Localization of plastic flow at dynamic channel angular pressing
E. N. Borodin and A. E. MayerTechnical Physics 58 (8) 1159 (2013)
https://doi.org/10.1134/S1063784213080070
Microstructure and mechanical properties of friction stir welded oxide dispersion strengthened alloy
Jiye Wang, Wei Yuan, Rajiv S. Mishra and Indrajit CharitJournal of Nuclear Materials (2012)
https://doi.org/10.1016/j.jnucmat.2012.08.001
Development of nanocrystalline structure in Cu during friction stir processing (FSP)
Jian-Qing Su, T.W. Nelson, T.R. McNelley and R.S. MishraMaterials Science and Engineering: A 528 (16-17) 5458 (2011)
https://doi.org/10.1016/j.msea.2011.03.043
A procedure for the definition of the influence of deformations on materials and their structures
V. M. Kosenkov and D. R. AvrametsSurface Engineering and Applied Electrochemistry 47 (5) 450 (2011)
https://doi.org/10.3103/S1068375511050127