Article cité par

La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).

Article cité :

Deformation Behavior of Aluminum Alloys under Various Stress States: Material Modeling and Testing

Toshihiko Kuwabara and Frédéric Barlat
MATERIALS TRANSACTIONS 65 (10) 1193 (2024)
https://doi.org/10.2320/matertrans.MT-L2024010

A study on the fracture pattern change of high-burnup fuel cladding failed by pellet-cladding mechanical interaction failure under reactivity-initiated accident conditions

Feng Li, Takeshi Mihara and Yutaka Udagawa
Journal of Nuclear Science and Technology 61 (9) 1265 (2024)
https://doi.org/10.1080/00223131.2024.2313553

An Improved Approach for Forming Limit Prediction of Strongly Anisotropic Thin-Walled Tube Combining M–K Model and Ductile Fracture Criterion

Haihui Zhu, Yanli Lin, Zhubin He and Shijian Yuan
Journal of Manufacturing Science and Engineering 145 (6) (2023)
https://doi.org/10.1115/1.4056708

Measurement and analysis of deformation behavior of thermoplastic elastomer tube subjected to biaxial tensile stress under loading and unloading

Sohta Kubo, Toshihiko Kuwabara, Takuya Sumiyama, et al.
International Journal of Material Forming 16 (3) (2023)
https://doi.org/10.1007/s12289-023-01752-5

Measurement and Analysis of Deformation Behavior of Polyethylene Tube Subjected to Biaxial Tensile Stress with Large Strain

Sohta KUBO, Toshihiko KUWABARA, Takuya SUMIYAMA, et al.
Journal of the Japan Society for Technology of Plasticity 62 (725) 73 (2021)
https://doi.org/10.9773/sosei.62.73

Fracture behavior of recrystallized and stress-relieved Zircaloy-4 cladding under biaxial stress conditions

Takeshi Mihara, Yutaka Udagawa and Masaki Amaya
Journal of Nuclear Science and Technology 56 (8) 724 (2019)
https://doi.org/10.1080/00223131.2019.1621783

Deformation behavior of recrystallized and stress-relieved Zircaloy-4 fuel cladding under biaxial stress conditions

Takeshi Mihara, Yutaka Udagawa and Masaki Amaya
Journal of Nuclear Science and Technology 55 (2) 151 (2018)
https://doi.org/10.1080/00223131.2017.1383213

Methods for Determining Yield Surfaces of Sheet Metals

Toshihiko KUWABARA
Journal of the Japan Society for Technology of Plasticity 57 (669) 934 (2016)
https://doi.org/10.9773/sosei.57.934

Anisotropic Yield Conditions in Mathematical Theory of Plasticity

Frédéric BARLAT and Toshihiko KUWABARA
Journal of the Japan Society for Technology of Plasticity 57 (662) 230 (2016)
https://doi.org/10.9773/sosei.57.230

Fracture Prediction for Ultralow Carbon Steel Sheet Subjected to Draw-Bending Using Forming Limit Stress Criterion

Chiharu Sekiguchi, Masazumi Saito, Toshihiko Kuwabara and Hiroshi Fukiharu
Key Engineering Materials 665 1 (2015)
https://doi.org/10.4028/www.scientific.net/KEM.665.1

Measurement of Fracture Limit of Cold-rolled Ultra-low Carbon Steel Sheets Subjected to Biaxial Tensile Stress

Masazumi SAITO
Journal of the Japan Society for Technology of Plasticity 56 (659) 1068 (2015)
https://doi.org/10.9773/sosei.56.1068

Work-hardening behavior of polycrystalline aluminum alloy under multiaxial stress paths

Kengo Yoshida, Asato Ishii and Yuichi Tadano
International Journal of Plasticity 53 17 (2014)
https://doi.org/10.1016/j.ijplas.2013.07.003

Material Modeling of 590 MPa High Strength Steel Sheet Using Multiaxial Tube Expansion Test with Digital Image Correlation System

Tomoyuki HAKOYAMA
Journal of the Japan Society for Technology of Plasticity 55 (647) 1126 (2014)
https://doi.org/10.9773/sosei.55.1126

Measurement and Material Modeling of Work Hardening Behavior of High Strength Steel Sheet Using Multiaxial Tube Expansion Testing Method

Tomoyuki HAKOYAMA, Fuminori SUGAWARA and Toshihiko KUWABARA
Journal of the Japan Society for Technology of Plasticity 54 (630) 628 (2013)
https://doi.org/10.9773/sosei.54.628

Measurement and Material Modeling of Work Hardening Behavior of Cold Rolled IF Steel Sheet Using Multiaxial Tube Expansion Test

Toshihiko Kuwabara, Ryotaro Enatsu, Shunsuke Yamagishi and Fuminori Sugawara
Tetsu-to-Hagane 98 275 (2012)
https://doi.org/10.2355/tetsutohagane.98.275

Multiaxial Tube Expansion Test Method for Measurement of Sheet Metal Deformation Behavior Under Biaxial Tension for a Large Strain Range

Toshihiko Kuwabara and Fuminori Sugawara
International Journal of Plasticity (2012)
https://doi.org/10.1016/j.ijplas.2012.12.003

Measurement and analysis of differential work hardening behavior of pure titanium sheet using spline function

Mantaro Ishiki, Toshihiko Kuwabara and Yasuhiro Hayashida
International Journal of Material Forming 4 (2) 193 (2011)
https://doi.org/10.1007/s12289-010-1024-5

Advances in anisotropy and formability

Dorel Banabic, Frédéric Barlat, Oana Cazacu and Toshihiko Kuwabara
International Journal of Material Forming 3 (3) 165 (2010)
https://doi.org/10.1007/s12289-010-0992-9

Differential Work Hardening Behavior of Pure Titanium Sheet under Biaxial Loading

Mantaro ISHIKI, Toshihiko KUWABARA, Makoto YAMAGUCHI, et al.
Transactions of the Japan Society of Mechanical Engineers Series A 75 (752) 491 (2009)
https://doi.org/10.1299/kikaia.75.491

Determining Subsequent Yield Surface of Pure Titanium Sheet by Use of Abrupt Strain Path Change

T. Kuwabara and Y. Horiuchi
International Journal of Material Forming 1 (S1) 237 (2008)
https://doi.org/10.1007/s12289-008-0360-1

Measurement of anisotropy in deformation and fracture strength of aluminum beverage can using biaxial stress tests

Toshihiko Kuwabara, Hiroyuki Inoue, Yasuhiro Hanabusa, Ryoichi Ito and Hideo Takizawa
Journal of Japan Institute of Light Metals 58 (9) 449 (2008)
https://doi.org/10.2464/jilm.58.449

Experimental and Numerical Studies on Stress-Based Forming Limit Criterion

Kengo YOSHIDA
Journal of the Japan Society for Technology of Plasticity 48 (563) 1107 (2007)
https://doi.org/10.9773/sosei.48.1107