EDP Sciences logo
Subscriber Authentication Point
Rechercher
Menu

Articles citing this article

The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).

Cited article:

Surface-based cohesive modeling of Mode I delamination in vascular self-healing composites: finite element analysis and multi-objective optimization

Mir Abolfazl Mokhtari, Hossein Dastgir and Meysam Jalalvand
Physica Scripta 101 (6) 065909 (2026)
https://doi.org/10.1088/1402-4896/ae3fd5

An analytical method to predict stiffener debonding in postbuckled compression panels

Richard Butler, Chanel Fallon, Thomas Maierhofer and David Kennedy
Composite Structures 379 119957 (2026)
https://doi.org/10.1016/j.compstruct.2025.119957

Dynamic crack branching in anisotropic coal: a rate-dependent modeling approach and ABAQUS implementation

Shen Wang, Kehao Chen, Feng Du, Liangliang Kong, Dongyin Li, Dake Liu and Huawei Xu
Geomechanics and Geophysics for Geo-Energy and Geo-Resources 12 (1) (2026)
https://doi.org/10.1007/s40948-025-01078-3

Theoretical Models Describing the Failure Behavior of Brittle Materials Based on Compression: A Review

M. A. Minghui, Y. U. Yilei and G. A. O. Guangfa
Mechanics of Solids 60 (8) 7176 (2025)
https://doi.org/10.1134/S0025654425606317

Analytical Shear-Band Process Zone Model Incorporating Nonlinear Viscous Effects and Initial Defects

J.D. Clayton
Journal of Applied Mechanics 92 (9) (2025)
https://doi.org/10.1115/1.4068648

Comparative Analysis on Modelling Approaches for the Simulation of Fatigue Disbonding with Cohesive Zone Models

Johan Birnie, Maria Pia Falaschetti and Enrico Troiani
Aerospace 12 (2) 139 (2025)
https://doi.org/10.3390/aerospace12020139

Advances of Science and Technology

Habtamu A. Tadesse, Temesgen Wondimu Aure and Alemayehu Golla Gualu
Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, Advances of Science and Technology 412 15 (2022)
https://doi.org/10.1007/978-3-030-93712-6_2

Comparison of Lightweight Structures in Bearing Impact Loads during Ice–Hull Interaction

Harsha Cheemakurthy, Zuheir Barsoum, Magnus Burman and Karl Garme
Journal of Marine Science and Engineering 10 (6) 794 (2022)
https://doi.org/10.3390/jmse10060794

Enhanced cohesive zone model to predict delamination behavior of carbon/epoxy laminated curved beams

David Ranz, Jesús Cuartero, Luis Castejón, Ramón Miralbes and David Valladares
Mechanics of Advanced Materials and Structures 29 (3) 331 (2022)
https://doi.org/10.1080/15376494.2020.1769232

On the formulation and implementation of extrinsic cohesive zone models with contact

N.A. Collins-Craft, F. Bourrier and V. Acary
Computer Methods in Applied Mechanics and Engineering 400 115545 (2022)
https://doi.org/10.1016/j.cma.2022.115545

Finite element analysis of concrete cracking: a comparative study between a diffuse interface model and an embedded crack model

Umberto De Maio, David Cendón, Fabrizio Greco, Lorenzo Leonetti, Paolo Nevone Blasi and Andrea Pranno
Procedia Structural Integrity 33 954 (2021)
https://doi.org/10.1016/j.prostr.2021.10.106

Integration of an adaptive cohesive zone and continuum ductile fracture model to simulate crack propagation in steel structures

Vincente Pericoli, Xai Lao, Andy Ziccarelli, Amit Kanvinde and Gregory Deierlein
Engineering Fracture Mechanics 258 108041 (2021)
https://doi.org/10.1016/j.engfracmech.2021.108041

Investigation of concrete cracking phenomena by using cohesive fracture-based techniques: A comparison between an embedded crack model and a refined diffuse interface model

Umberto De Maio, David Cendón, Fabrizio Greco, Lorenzo Leonetti, Paolo Nevone Blasi and Jaime Planas
Theoretical and Applied Fracture Mechanics 115 103062 (2021)
https://doi.org/10.1016/j.tafmec.2021.103062

Failure Modeling and Sensitivity Analysis of Ceramics Under Impact

Amartya Bhattacharjee, Anindya Bhaduri, Ryan C. Hurley and Lori Graham-Brady
Journal of Applied Mechanics 88 (5) (2021)
https://doi.org/10.1115/1.4049807

Three-dimensional modeling of fracture in quasi-brittle materials using plasticity and cohesive finite elements

Raul Durand and Fernando Hipólito Barros Trinidade da Silva
International Journal of Fracture 228 (1) 45 (2021)
https://doi.org/10.1007/s10704-021-00514-1

Study on the cohesive edge crack in a square plate with the cohesive element method

Leon Kellner, Wenjun Lu, Sören Ehlers and Knut V. Høyland
International Journal of Fracture (2021)
https://doi.org/10.1007/s10704-021-00560-9

Prediction of Cohesive Zone Length and Accurate Numerical Simulation of Delamination under Mixed-mode Loading

Chetan H. C., Subhaschandra Kattimani and S. M. Murigendrappa
Applied Composite Materials 28 (6) 1861 (2021)
https://doi.org/10.1007/s10443-021-09939-2

Dynamic cracking simulation by the nonlocal macro‐meso‐scale damage model for isotropic materials

Guangda Lu and Jianbing Chen
International Journal for Numerical Methods in Engineering 122 (12) 3070 (2021)
https://doi.org/10.1002/nme.6654

Finite element analysis and acoustic emission monitoring of progressive failure of corrugated core composite structures

Fatih E. Oz, Emre Calik and Nuri Ersoy
Composite Structures 253 112775 (2020)
https://doi.org/10.1016/j.compstruct.2020.112775

A cohesive zone model approach to interlaminar behaviour of carbon/epoxy laminated curved beams

David Ranz, Jesus Cuartero, Luis Castejon, Ramon Miralbes and Hugo Malon
Composite Structures 238 111983 (2020)
https://doi.org/10.1016/j.compstruct.2020.111983

A refined diffuse cohesive approach for the failure analysis in quasibrittle materials—part II: Application to plain and reinforced concrete structures

Umberto De Maio, Fabrizio Greco, Lorenzo Leonetti, et al.
Fatigue & Fracture of Engineering Materials & Structures 42 (12) 2764 (2019)
https://doi.org/10.1111/ffe.13115

A computationally efficient cohesive zone model for fatigue

Sarmed Salih, Keith Davey and Zhenmin Zou
Fatigue & Fracture of Engineering Materials & Structures 42 (2) 518 (2019)
https://doi.org/10.1111/ffe.12927

A variational multiscale discontinuous Galerkin formulation for both implicit and explicit dynamic modeling of interfacial fracture

Sunday C. Aduloju and Timothy J. Truster
Computer Methods in Applied Mechanics and Engineering 343 602 (2019)
https://doi.org/10.1016/j.cma.2018.08.025

Low velocity impact and compression after impact simulation of thin ply laminates

A. Soto, E.V. González, P. Maimí, F. Martín de la Escalera, J.R. Sainz de Aja and E. Alvarez
Composites Part A: Applied Science and Manufacturing 109 413 (2018)
https://doi.org/10.1016/j.compositesa.2018.03.017

A methodology to simulate low velocity impact and compression after impact in large composite stiffened panels

A. Soto, E.V. González, P. Maimí, J.A. Mayugo, P.R. Pasquali and P.P. Camanho
Composite Structures 204 223 (2018)
https://doi.org/10.1016/j.compstruct.2018.07.081

Adaptive modelling of delamination initiation and propagation using an equivalent single‐layer shell approach

Johannes Främby, Martin Fagerström and Jim Brouzoulis
International Journal for Numerical Methods in Engineering 112 (8) 882 (2017)
https://doi.org/10.1002/nme.5536

3D dynamic fragmentation with parallel dynamic insertion of cohesive elements

M. Vocialta, N. Richart and J.‐F. Molinari
International Journal for Numerical Methods in Engineering 109 (12) 1655 (2017)
https://doi.org/10.1002/nme.5339

Cohesive zone modeling of crack propagation influenced by martensitic phase transformation

Sally Issa, Sara Eliasson, Alexander Lundberg, Mathias Wallin and Håkan Hallberg
Materials Science and Engineering: A (2017)
https://doi.org/10.1016/j.msea.2017.12.009

On the assessment of the load-bearing capacity of Z-pinned composite T-joint under out-of-plane tension

Dajun Huan, Yong Li, Yan Tan, Xiangyang Zhang and Jun Xiao
Journal of Reinforced Plastics and Composites 36 (22) 1639 (2017)
https://doi.org/10.1177/0731684417722409

Strain injection techniques in dynamic fracture modeling

O. Lloberas-Valls, A.E. Huespe, J. Oliver and I.F. Dias
Computer Methods in Applied Mechanics and Engineering (2016)
https://doi.org/10.1016/j.cma.2016.05.023

Dynamic crack propagation in a heterogeneous ceramic microstructure, insights from a cohesive model

S.M. Taheri Mousavi, N. Richart, C. Wolff and J.F. Molinari
Acta Materialia 88 136 (2015)
https://doi.org/10.1016/j.actamat.2015.01.003

Analysis of the Numerical and Geometrical Parameters Influencing the Simulation of Mode I and Mode II Delamination Growth in Unidirectional and Textile Composites

S. Jacques, I. De Baere and W. Van Paepegem
Applied Composite Materials 22 (6) 637 (2015)
https://doi.org/10.1007/s10443-014-9429-9

Softening behaviour modelling of aluminium alloy 6082 using a non-linear cohesive zone law

Kyungmok Kim
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 229 (5) 431 (2015)
https://doi.org/10.1177/1464420714525134

A stochastic description on the traction-separation law of an interface with non-covalent bonding

Yujie Wei
Journal of the Mechanics and Physics of Solids 70 227 (2014)
https://doi.org/10.1016/j.jmps.2014.05.014

Progressive failure analysis of perforated aluminium/CFRP fibre metal laminates using a combined elastoplastic damage model and including delamination effects

Jing-Fen Chen, Evgeny V. Morozov and Krishnakumar Shankar
Composite Structures 114 64 (2014)
https://doi.org/10.1016/j.compstruct.2014.03.046

Full Fluid–Solid Cohesive Finite-Element Model to Simulate Near Wellbore Fractures

Saeed Salehi and Runar Nygaard
Journal of Energy Resources Technology 137 (1) 012903 (2014)
https://doi.org/10.1115/1.4028251

Distinguishing fluid injection induced ground deformation caused by fracture pressurization from porous medium pressurization

Xuejun Zhou and Thomas J. Burbey
Journal of Petroleum Science and Engineering (2014)
https://doi.org/10.1016/j.petrol.2014.06.028

Numerical Simulations of Dynamic Fracture Growth Based on a Cohesive Zone Model with Microcracks

Liqiang Lin, Rahul Dhanawade and Xiaowei Zeng
Journal of Nanomechanics and Micromechanics 4 (3) (2014)
https://doi.org/10.1061/(ASCE)NM.2153-5477.0000096

Fluid effect on hydraulic fracture propagation behavior: a comparison between water and supercritical CO2‐like fluid

X. Zhou and T. J. Burbey
Geofluids 14 (2) 174 (2014)
https://doi.org/10.1111/gfl.12061

The dynamics of rapid fracture: instabilities, nonlinearities and length scales

Eran Bouchbinder, Tamar Goldman and Jay Fineberg
Reports on Progress in Physics 77 (4) 046501 (2014)
https://doi.org/10.1088/0034-4885/77/4/046501

Computational Methods for Fracture in Brittle and Quasi-Brittle Solids: State-of-the-Art Review and Future Perspectives

Timon Rabczuk
ISRN Applied Mathematics 2013 1 (2013)
https://doi.org/10.1155/2013/849231

3D Nonlinear XFEM Simulation of Delamination in Unidirectional Composite Laminates: A Sensitivity Analysis of Modeling Parameters

Damoon Motamedi and Abbas S. Milani
Open Journal of Composite Materials 03 (04) 113 (2013)
https://doi.org/10.4236/ojcm.2013.34012

Quasi-explicit time-integration schemes for dynamic fracture with set-valued cohesive zone models

D. Doyen, A. Ern and S. Piperno
Computational Mechanics 52 (2) 401 (2013)
https://doi.org/10.1007/s00466-012-0819-2

Cohesive Zone Models: A Critical Review of Traction-Separation Relationships Across Fracture Surfaces

Kyoungsoo Park and Glaucio H. Paulino
Applied Mechanics Reviews 64 (6) 060802 (2013)
https://doi.org/10.1115/1.4023110

Experiments and Three-Dimensional Modeling of Delamination in an Encapsulated Microelectronic Package Under Thermal Loading

Siow Ling Ho, Shailendra P. Joshi and Andrew A. O. Tay
IEEE Transactions on Components, Packaging and Manufacturing Technology 3 (11) 1859 (2013)
https://doi.org/10.1109/TCPMT.2013.2266406

Dynamic crack growth: Analytical and numerical cohesive zone models approaches from basic tests to industrial structures

G. Debruyne, J. Laverne and P.E. Dumouchel
Engineering Fracture Mechanics 90 1 (2012)
https://doi.org/10.1016/j.engfracmech.2012.04.002

Simulation of Ductile Fracture of Slabs Subjected to Dynamic Loading Using Cohesive Elements

K. Nilsson and P. Lidström
International Journal of Damage Mechanics 21 (6) 871 (2012)
https://doi.org/10.1177/1056789511420892

Numerical study on the effects of hierarchical wavy interface morphology on fracture toughness

Bing-Wei Li, Hong-Ping Zhao, Qing-Hua Qin, Xi-Qiao Feng and Shou-Wen Yu
Computational Materials Science 57 14 (2012)
https://doi.org/10.1016/j.commatsci.2011.01.032

An atomistic-based interphase zone model for crystalline solids

Shaofan Li, Xiaowei Zeng, Bo Ren, et al.
Computer Methods in Applied Mechanics and Engineering 229-232 87 (2012)
https://doi.org/10.1016/j.cma.2012.03.023

Cohesive zone criterion for cracking along the Cu/Si interface in nanoscale components

Yabin Yan, Takashi Sumigawa, Fulin Shang and Takayuki Kitamura
Engineering Fracture Mechanics 78 (17) 2935 (2011)
https://doi.org/10.1016/j.engfracmech.2011.08.010

The role of cohesive properties on intergranular crack propagation in brittle polycrystals

Z Shabir, E Van der Giessen, C A Duarte and A Simone
Modelling and Simulation in Materials Science and Engineering 19 (3) 035006 (2011)
https://doi.org/10.1088/0965-0393/19/3/035006

Numerical Modeling of Concrete Cracking

Alfredo E. Huespe and Javier Oliver
CISM International Centre for Mechanical Sciences, Numerical Modeling of Concrete Cracking 532 99 (2011)
https://doi.org/10.1007/978-3-7091-0897-0_3

A generalized cohesive element technique for arbitrary crack motion

Spandan Maiti, Dipankar Ghosh and Ghatu Subhash
Finite Elements in Analysis and Design 45 (8-9) 501 (2009)
https://doi.org/10.1016/j.finel.2009.02.003

Numerical difficulties and computational procedures for thermo-hydro-mechanical coupled problems of saturated porous media

L. Simoni, S. Secchi and B. A. Schrefler
Computational Mechanics 43 (1) 179 (2008)
https://doi.org/10.1007/s00466-008-0302-2

A new crack tip element for the phantom‐node method with arbitrary cohesive cracks

Timon Rabczuk, Goangseup Zi, Axel Gerstenberger and Wolfgang A. Wall
International Journal for Numerical Methods in Engineering 75 (5) 577 (2008)
https://doi.org/10.1002/nme.2273

Modeling of Dynamic Fracture and Damage in Two-Dimensional Trabecular Bone Microstructures Using the Cohesive Finite Element Method

Vikas Tomar
Journal of Biomechanical Engineering 130 (2) (2008)
https://doi.org/10.1115/1.2903434

Discontinuous modelling of shear bands using adaptive meshfree methods

T. Rabczuk and E. Samaniego
Computer Methods in Applied Mechanics and Engineering 197 (6-8) 641 (2008)
https://doi.org/10.1016/j.cma.2007.08.027

Quasi‐static crack propagation in plane and plate structures using set‐valued traction‐separation laws

Pedro M. A. Areias and Timon Rabczuk
International Journal for Numerical Methods in Engineering 74 (3) 475 (2008)
https://doi.org/10.1002/nme.2182

Unstable and limited crack propagation

Bing Tie, Haithem Adouani, Clotilde Berdin and Silvère Cattet
European Journal of Computational Mechanics 17 (5-7) 663 (2008)
https://doi.org/10.3166/remn.17.663-675

A comparison of finite element and atomistic modelling of fracture

V R Coffman, J P Sethna, G Heber, et al.
Modelling and Simulation in Materials Science and Engineering 16 (6) 065008 (2008)
https://doi.org/10.1088/0965-0393/16/6/065008

Computational micromechanics of dynamic compressive loading of a brittle polycrystalline material using a distribution of grain boundary properties

R.H. Kraft, J.F. Molinari, K.T. Ramesh and D.H. Warner
Journal of the Mechanics and Physics of Solids 56 (8) 2618 (2008)
https://doi.org/10.1016/j.jmps.2008.03.009

Three-dimensional crack initiation, propagation, branching and junction in non-linear materials by an extended meshfree method without asymptotic enrichment

Stéphane Bordas, Timon Rabczuk and Goangseup Zi
Engineering Fracture Mechanics 75 (5) 943 (2008)
https://doi.org/10.1016/j.engfracmech.2007.05.010

Extrinsic cohesive modelling of dynamic fracture and microbranching instability in brittle materials

Zhengyu (Jenny) Zhang, Glaucio H. Paulino and Waldemar Celes
International Journal for Numerical Methods in Engineering 72 (8) 893 (2007)
https://doi.org/10.1002/nme.2030

Coupled Quantum–Atomistic and Quantum–Continuum Mechanics Methods in Materials Research

Ashwin Ramasubramaniam and Emily A. Carter
MRS Bulletin 32 (11) 913 (2007)
https://doi.org/10.1557/mrs2007.188

Work of adhesion in laser-induced delamination along polymer-metal interfaces

A. Fedorov, R. van Tijum, W. P. Vellinga and J. Th. M. De Hosson
Journal of Applied Physics 101 (4) 043520 (2007)
https://doi.org/10.1063/1.2434805