Advances in aluminium alloy products for structural applications in transportation
J. Phys. IV France, 03 C7 (1993) C7-179-C7-190
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Facilitating Recycling of 6xxx Series Aluminum Alloys by Machine Learning-Based Optimization
Tanu Tiwari, Chamini Mendis and Dmitry EskinJournal of Sustainable Metallurgy (2025)
https://doi.org/10.1007/s40831-025-01112-4
Review on Environmentally Assisted Static and Fatigue Cracking of Al-Mg-Si-(Cu) Alloys
Tetiana Avramenko, Silvain Michel, Jan Kollender, Iurii Burda, Ulrik Hans and Christian AffolterMetals 14 (6) 621 (2024)
https://doi.org/10.3390/met14060621
The Materials Science behind Sustainable Metals and Alloys
Dierk RaabeChemical Reviews 123 (5) 2436 (2023)
https://doi.org/10.1021/acs.chemrev.2c00799
Improving the prediction of mechanical properties of aluminium alloy using data-driven class-based regression
Ninad Bhat, Amanda S. Barnard and Nick BirbilisComputational Materials Science 228 112270 (2023)
https://doi.org/10.1016/j.commatsci.2023.112270
Modeling the Heterogeneity Spatial Distribution of Coarse Second Phase Particle on Recrystallization Behavior in 7XXX Al Alloy
Khaled Adam and David FieldMaterials Science Forum 1103 13 (2023)
https://doi.org/10.4028/p-eu4JYI
Improving Mechanical and Corrosion Behavior of 5052 Aluminum Alloy Processed by Cyclic Extrusion Compression
Jianxin Wu, Faramarz Djavanroodi, Mahmoud Shamsborhan, Shokouh Attarilar and Mahmoud EbrahimiMetals 12 (8) 1288 (2022)
https://doi.org/10.3390/met12081288
Handbook of Research on Advancements in the Processing, Characterization, and Application of Lightweight Materials
Noureddine Ramdani and Mohammed Seddik RazaliAdvances in Chemical and Materials Engineering, Handbook of Research on Advancements in the Processing, Characterization, and Application of Lightweight Materials 101 (2022)
https://doi.org/10.4018/978-1-7998-7864-3.ch005
Making sustainable aluminum by recycling scrap: The science of “dirty” alloys
Dierk Raabe, Dirk Ponge, Peter J. Uggowitzer, et al.Progress in Materials Science 128 100947 (2022)
https://doi.org/10.1016/j.pmatsci.2022.100947
Development of High Strength and Toughness Non-Heated Al–Mg–Si Alloys for High-Pressure Die-Casting
Ling-Yang Yuan, Pan-Wen Han, Ghulam Asghar, et al.Acta Metallurgica Sinica (English Letters) 34 (6) 845 (2021)
https://doi.org/10.1007/s40195-020-01174-1
Real-Time Defects Analyses Using High-Speed Imaging during Aluminum Magnesium Alloy Laser Welding
Sabin Mihai, Diana Chioibasu, Muhammad Arif Mahmood, et al.Metals 11 (11) 1877 (2021)
https://doi.org/10.3390/met11111877
Issues and Requirements for Aluminum Alloys Used in Aircraft Components: State of the Art
Pooja Dwivedi, Arshad Noor Siddiquee and Sachin MaheshwariRussian Journal of Non-Ferrous Metals 62 (2) 212 (2021)
https://doi.org/10.3103/S1067821221020048
Characterisation of a High-Performance Al–Zn–Mg–Cu Alloy Designed for Wire Arc Additive Manufacturing
Paulo J. Morais, Bianca Gomes, Pedro Santos, et al.Materials 13 (7) 1610 (2020)
https://doi.org/10.3390/ma13071610
A New Approach to Implement High Strength 7075 Aluminum for Automotive Application
Cedric Wu, Yudie Yuan, Rajeev Kamat, et al.MATEC Web of Conferences 326 03004 (2020)
https://doi.org/10.1051/matecconf/202032603004
Electro-Magnetic Forming of Fiber Metal Laminates
Vladimir Glushchenkov, Dmitrii Chernikov, Yaroslav Erisov, Ilia Petrov, Sergei Alexandrov and Li Hui LangKey Engineering Materials 794 107 (2019)
https://doi.org/10.4028/www.scientific.net/KEM.794.107
Properties and Selection of Aluminum Alloys
Properties and Selection of Aluminum Alloys 298 (2019)https://doi.org/10.31399/asm.hb.v02b.a0006598
Estimating increasing diversity and dissipative loss of critical metals in the aluminum automotive sector
Ayomipo Arowosola and Gabrielle GaustadResources, Conservation and Recycling 150 104382 (2019)
https://doi.org/10.1016/j.resconrec.2019.06.016
Influence of the Crystallographic Texture of Aluminum Sheets on the Fracture Toughness of Metal–Polymer Composite Materials
F. V. Grechnikov, Ya. A. Erisov and I. N. PetrovRussian Metallurgy (Metally) 2019 (4) 341 (2019)
https://doi.org/10.1134/S003602951904013X
Investigation on the microstructure and mechanical behaviour of post-weld heat treated AA6351 aluminium weldments
B N Sreeharan and T KannanMaterials Research Express 6 (4) 046533 (2019)
https://doi.org/10.1088/2053-1591/aafc3b
Properties and Selection of Aluminum Alloys
Robert Sanders and James StaleyProperties and Selection of Aluminum Alloys 157 (2019)
https://doi.org/10.31399/asm.hb.v02b.a0006516
Strengthening mechanisms, deformation behavior, and anisotropic mechanical properties of Al-Li alloys: A review
Ali Abd El-Aty, Yong Xu, Xunzhong Guo, et al.Journal of Advanced Research 10 49 (2018)
https://doi.org/10.1016/j.jare.2017.12.004
Modeling the Controlled Recrystallization of Particle-Containing Aluminum Alloys
Khaled Adam, Jameson M. Root, Zhengdong Long and David P. FieldJournal of Materials Engineering and Performance 26 (1) 207 (2017)
https://doi.org/10.1007/s11665-016-2436-2
Effect of Fe-Content on the Mechanical Properties of Recycled Al Alloys during Hot Compression
Hongzhou Lu, Zeran Hou, Mingtu Ma and Guimin LuMetals 7 (7) 262 (2017)
https://doi.org/10.3390/met7070262
Experimental determination of accurate fatigue crack growth data in Tailored Welded Blanks
Julian Schwinn, Michael Besel and Ulises Alfaro MercadoEngineering Fracture Mechanics 163 141 (2016)
https://doi.org/10.1016/j.engfracmech.2016.07.006
3 (2015)
https://doi.org/10.1520/STP158420140050
A Review on use of Aluminium Alloys in Aircraft Components
C.S. Jawalkar and Suman Kanti-manager's Journal on Material Science 3 (3) 33 (2015)
https://doi.org/10.26634/jms.3.3.3673
Enhancement on thermal shock resistance of TBCs with EP interlayer
G. X. Lu, L. J. Hao, Z. X. Cheng and F. X. YeSurface Engineering 30 (8) 579 (2014)
https://doi.org/10.1179/1743294414Y.0000000289
Hot Stamping of a B-Pillar Outer from High Strength Aluminum Sheet AA7075
Nia R. Harrison and S. George LuckeySAE International Journal of Materials and Manufacturing 7 (3) 567 (2014)
https://doi.org/10.4271/2014-01-0981
Microstructural Evolution and Solidification Behavior of Al-Mg-Si Alloy in High-Pressure Die Casting
Shouxun Ji, Yun Wang, D. Watson and Z. FanMetallurgical and Materials Transactions A 44 (7) 3185 (2013)
https://doi.org/10.1007/s11661-013-1663-5
Development of a super ductile diecast Al–Mg–Si alloy
S. Ji, D. Watson, Z. Fan and M. WhiteMaterials Science and Engineering: A 556 824 (2012)
https://doi.org/10.1016/j.msea.2012.07.074
Effect of cooling rate on microstructure and mechanical properties of rapidly solidified Al-based bulk alloys
Longchao Zhuo, Shujie Pang, Hui Wang and Tao ZhangJournal of Alloys and Compounds 504 S117 (2010)
https://doi.org/10.1016/j.jallcom.2010.03.211
Residual Stress Analysis of Punched Holes in 6013 Aluminum Alloy Commercial Vehicle Side Rails
Tory Smith, Jeremy Rickli, Sean Fleming and Jaime Andres CamelioSAE International Journal of Commercial Vehicles 3 (1) 32 (2010)
https://doi.org/10.4271/2010-01-1909
The quasi static deformation and fracture behavior of aluminum alloy 7150
T.S. Srivatsan, G. Guruprasad and Vijay K. VasudevanMaterials & Design 29 (4) 742 (2008)
https://doi.org/10.1016/j.matdes.2007.01.006
The tensile deformation and fracture behavior of friction stir welded aluminum alloy 2024
T.S. Srivatsan, Satish Vasudevan and Lisa ParkMaterials Science and Engineering: A 466 (1-2) 235 (2007)
https://doi.org/10.1016/j.msea.2007.02.100
An investigation of the cyclic fatigue and fracture behavior of aluminum alloy 7055
T.S SrivatsanMaterials & Design 23 (2) 141 (2002)
https://doi.org/10.1016/S0261-3069(01)00071-1
The high-cycle fatigue and fracture behavior of aluminum alloy 7055
T.S Srivatsan, S Anand, S Sriram and V.K VasudevanMaterials Science and Engineering: A 281 (1-2) 292 (2000)
https://doi.org/10.1016/S0921-5093(99)00716-9
Temperature and the ductility, deformation, and fracture of Al 7055
T. S. Srivatsan and V. K. VasudevanJOM 51 (1) 42 (1999)
https://doi.org/10.1007/s11837-999-0011-0
Influence of notch severity on the impact fracture behavior of aluminum alloy 7055
Julie Champlin, J. Zakrajsek, T.S. Srivatsan, P.C. Lam and M. ManoharanMaterials & Design 20 (6) 331 (1999)
https://doi.org/10.1016/S0261-3069(99)00039-4
Mechanisms governing deformation and damage during elevated-temperature fatigue of an aluminum-magnesium-silicon alloy
T. S. Srivatsan, S. Anand and N. NarendraJournal of Materials Engineering and Performance 6 (2) 187 (1997)
https://doi.org/10.1007/s11665-997-0013-4