CYCLING EFFECTS, FATIGUE AND DEGRADATION OF SHAPE MEMORY ALLOYS
J. Phys. IV France, 01 C4 (1991) C4-189-C4-197
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
АНАЛИЗ ИЗМЕНЕНИЯ МИКРОСТРУКТУРЫ И ТЕМПЕРАТУР МАРТЕНСИТНЫХ ПРЕВРАЩЕНИЙ В СПЛАВЕ TiNi С РАЗЛИЧНОЙ СТРУКТУРОЙ
А.А. Чуракова and Э.И. ИсхаковаNanoindustry Russia 17 (1) 56 (2024)
https://doi.org/10.22184/1993-8578.2023.17.1.56.70
Safe Supervisory Control of Soft Robot Actuators
Andrew P. Sabelhaus, Zach J. Patterson, Anthony T. Wertz and Carmel MajidiSoft Robotics 11 (4) 561 (2024)
https://doi.org/10.1089/soro.2022.0131
Effects of long-term thermal cycling on martensitic transformation temperatures and thermodynamic parameters of polycrystalline CuAlBeCr shape memory alloy
David D. S. Silva, Nilmário G. Guedes, Danniel F. Oliveira, et al.Journal of Thermal Analysis and Calorimetry 147 (14) 7875 (2022)
https://doi.org/10.1007/s10973-021-11106-5
On the microstructure and tensile behaviour of nanostructured NiTi alloy produced by electroplastic rolling
J. V. Tilak Kumar, Sudha Jayaprakasam, V. S. Senthil Kumar , et al.Letters on Materials 12 (2) 83 (2022)
https://doi.org/10.22226/2410-3535-2022-2-83-88
Critical Frequency of Self-Heating in a Superelastic Ni-Ti Belleville Spring: Experimental Characterization and Numerical Simulation
Emmanuel Ferreira de Souza, Paulo César Sales da Silva, Estephanie Nobre Dantas Grassi, Carlos José de Araújo and Antonio Gilson Barbosa de LimaSensors 21 (21) 7140 (2021)
https://doi.org/10.3390/s21217140
Influence of Aging Temperature on Functional Fatigue Behavior of a Ti50Ni45Cu5 Shape Memory Alloy
G. Swaminathan, V. Sampath and S. H. AdarshTransactions of the Indian Institute of Metals 74 (10) 2435 (2021)
https://doi.org/10.1007/s12666-021-02209-6
Biodegradable shape memory alloys: Progress and prospects
Yuan Wang, Jeffrey Venezuela and Matthew DarguschBiomaterials 279 121215 (2021)
https://doi.org/10.1016/j.biomaterials.2021.121215
Comparison of Bending Fatigue of NiTi and CuAlMn Shape Memory Alloy Bars
Haoyu Huang, Yuan-Zhi Zhu, Wen-Shao Chang and Davide PalumboAdvances in Materials Science and Engineering 2020 (1) (2020)
https://doi.org/10.1155/2020/8024803
An energy-flexible mechanism for qPCR thermal cycling using shape memory alloys
Ryan Snodgrass, Duncan McCloskey, Paul Benecke and David EricksonSmart Materials and Structures 29 (4) 045038 (2020)
https://doi.org/10.1088/1361-665X/ab7739
Three-dimensional constitutive model for structural and functional fatigue of shape memory alloy actuators
Yves Chemisky, Darren J. Hartl and Fodil MeraghniInternational Journal of Fatigue (2018)
https://doi.org/10.1016/j.ijfatigue.2018.03.016
Fatigue of NiTi SMA–pulley system using Taguchi and ANOVA
Jaronie Mohd Jani, Martin Leary and Aleksandar SubicSmart Materials and Structures 25 (5) 057001 (2016)
https://doi.org/10.1088/0964-1726/25/5/057001
Efficiency and work performance of TiNi alloy undergoing B2 ↔ R martensitic transformation
Natalia Resnina, Sergey Belyaev, Ksenia Anshukova and Roman ZhuravlevInternational Journal of Materials Research 105 (5) 440 (2014)
https://doi.org/10.3139/146.111058
Micro and Smart Devices and Systems
S. K. Bhaumik, K. V. Ramaiah and C. N. SaikrishnaSpringer Tracts in Mechanical Engineering, Micro and Smart Devices and Systems 181 (2014)
https://doi.org/10.1007/978-81-322-1913-2_11
Stability of mechanical behavior and work performance in TiNi-based alloys during thermal cycling
Sergey Belyaev and Natalia ResninaInternational Journal of Materials Research 104 (1) 11 (2013)
https://doi.org/10.3139/146.110830
Peculiarities of residual strain accumulation during thermal cycling of TiNi alloy
S. Belyaev, N. Resnina and A. SibirevJournal of Alloys and Compounds 542 37 (2012)
https://doi.org/10.1016/j.jallcom.2012.07.082
Microstructural Irreversibilities under Thermal Cycling in Ni-Ti-Fe Shape Memory Alloys
Ritwik Basu, Lokendra Jain, Bikas Maji, et al.Materials Science Forum 702-703 888 (2011)
https://doi.org/10.4028/www.scientific.net/MSF.702-703.888
Cyclic behavior and energy approach to the fatigue of shape memory alloys
Ziad Moumni, Wael Zaki and Habibou MaitournamJournal of Mechanics of Materials and Structures 4 (2) 395 (2009)
https://doi.org/10.2140/jomms.2009.4.395
Influence of A-site size and disorder on metamagnetic transformation in A-site substituted Pr[sub 0.5]Ca[sub 0.5]MnO[sub 3]
Deliang Zhu, Xiaoan Tan, Peijiang Cao, et al.Journal of Applied Physics 105 (6) 063914 (2009)
https://doi.org/10.1063/1.3098228
Effect of mechanical cycling on the stress–strain response of a martensitic Nitinol shape memory alloy
Niraj Nayan, V. Buravalla and U. RamamurtyMaterials Science and Engineering: A 525 (1-2) 60 (2009)
https://doi.org/10.1016/j.msea.2009.07.038
Progress in the understanding of NiTi shape memory alloys
S. K. BhaumikTransactions of the Indian Institute of Metals 61 (5) 435 (2008)
https://doi.org/10.1007/s12666-008-0076-4
Effects of thermo-mechanical cycling on the strain response of Ni–Ti–Cu shape memory alloy wire actuator
C.N. Saikrishna, K. Venkata Ramaiah and S.K. BhaumikMaterials Science and Engineering: A 428 (1-2) 217 (2006)
https://doi.org/10.1016/j.msea.2006.05.008
Fatigue analysis of shape memory alloys: energy approach
Z Moumni, A Van Herpen and P RibertySmart Materials and Structures 14 (5) S287 (2005)
https://doi.org/10.1088/0964-1726/14/5/017
Morphological characterization and in vitro biocompatibility of a porous nickel–titanium alloy
Oleg Prymak, Denise Bogdanski, Manfred Köller, et al.Biomaterials 26 (29) 5801 (2005)
https://doi.org/10.1016/j.biomaterials.2005.02.029
Fatigue resistance of SMA-martensite bars subjected to flexural bending
M. Dolce and D. CardoneInternational Journal of Mechanical Sciences 47 (11) 1693 (2005)
https://doi.org/10.1016/j.ijmecsci.2005.05.007
Staircase effect in metamagnetic transitions of charge and orbitally ordered manganites
V Hardy, S Hébert, A Maignan, et al.Journal of Magnetism and Magnetic Materials 264 (2-3) 183 (2003)
https://doi.org/10.1016/S0304-8853(03)00201-4
Abrupt jumps in the metamagnetic transitions of orbitally ordered manganites
A. Maignan, V. Hardy, C. Martin, S. Hébert and B. RaveauJournal of Applied Physics 93 (10) 7361 (2003)
https://doi.org/10.1063/1.1543896
Staircase-like metamagnetic transitions in phase-separated manganites: Influence of thermal and mechanical treatments
V. Hardy, C. Yaicle, S. Hébert, et al.Journal of Applied Physics 94 (8) 5316 (2003)
https://doi.org/10.1063/1.1606518
Mechanical behaviour of shape memory alloys for seismic applications 1. Martensite and austenite NiTi bars subjected to torsion
Mauro Dolce and Donatello CardoneInternational Journal of Mechanical Sciences 43 (11) 2631 (2001)
https://doi.org/10.1016/S0020-7403(01)00049-2
Microstructural evolution in the pseudoelastic cycling of Cu–Zn–Al single crystals: behavior at a transition stage
J. Malarrı́a, M. Sade and F. LoveyMaterials Science and Engineering: A 308 (1-2) 88 (2001)
https://doi.org/10.1016/S0921-5093(00)02023-2
Non-medical applications of shape memory alloys
Jan Van HumbeeckMaterials Science and Engineering: A 273-275 134 (1999)
https://doi.org/10.1016/S0921-5093(99)00293-2
Cryostat for fatigue tests down to liquid‐nitrogen temperatures
Jorge Malarría, Marcos Sade and Eduardo TaglialavoreReview of Scientific Instruments 65 (6) 2091 (1994)
https://doi.org/10.1063/1.1144817