DETERMINATION OF CONSTANTS AND COMPARISON OF RESULTS FOR VARIOUS CONSTITUTIVE MODELS
J. Phys. IV France, 01 C3 (1991) C3-853-C3-860
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Experimental validation and 3D finite element modelling of scratch-induced deformation in Ti-6Al-4V alloy
Erkan Tur, Joseph Betts, Laurent Perge, Quanren Zeng and Alborz ShokraniProcedia CIRP 133 8 (2025)
https://doi.org/10.1016/j.procir.2025.02.003
HLFEMP: A coupled MPM-FEM method under a hybrid updated and total Lagrangian framework
Shijie Zhou, Guangsong Chen, Linfang Qian and Jia MaApplied Mathematical Modelling 136 115644 (2024)
https://doi.org/10.1016/j.apm.2024.115644
An upper bound analysis of channel angular pressing process considering die geometric characteristics, friction, and material strain-hardening
H. Khanlari and M. HonarpishehCIRP Journal of Manufacturing Science and Technology 41 259 (2023)
https://doi.org/10.1016/j.cirpj.2022.12.007
1 (2022)
https://doi.org/10.1109/ISIEA54517.2022.9873757
Numerical Simulation of Material Plastic Deformation Using the Drawing Forming Process of Contoured Internal Surface Tubes
Martin Necpal, Erika Hodúlová and Maroš MartinkovičKey Engineering Materials 841 54 (2020)
https://doi.org/10.4028/www.scientific.net/KEM.841.54
A Total-Lagrangian Material Point Method for solid mechanics problems involving large deformations
Alban de Vaucorbeil, Vinh Phu Nguyen and Christopher R. HutchinsonComputer Methods in Applied Mechanics and Engineering 360 112783 (2020)
https://doi.org/10.1016/j.cma.2019.112783
The modified temperature term on Johnson-Cook constitutive model of AZ31 magnesium alloy with {0002} texture
Feng Zhang, Zheng Liu, Yue Wang, et al.Journal of Magnesium and Alloys 8 (1) 172 (2020)
https://doi.org/10.1016/j.jma.2019.05.013
2272 110003 (2020)
https://doi.org/10.1063/12.0000933
A Constitutive Model of Plate-Like Entangled Metallic Wire Material in Wide Temperature Range
Zheyu Ding, Hongbai Bai, Yiwan Wu, Zhiying Ren and Yichuan ShaoMaterials 12 (16) 2538 (2019)
https://doi.org/10.3390/ma12162538
Determination of the Coefficient of Friction Under Cold Tube Drawing Using FEM Simulation and Drawing Force Measurement
Martin Necpal, Maroš Martinkovič and Štefan VáclavResearch Papers Faculty of Materials Science and Technology Slovak University of Technology 26 (42) 29 (2018)
https://doi.org/10.2478/rput-2018-0003
Mechanical Response and Shear-Induced Initiation Properties of PTFE/Al/MoO3 Reactive Composites
Junyi Huang, Xiang Fang, Shuangzhang Wu, et al.Materials 11 (7) 1200 (2018)
https://doi.org/10.3390/ma11071200
Temperature Effects on Fracture Toughness Parameters for Pipeline Steels
Sourayon Chanda and C. Q. RuInternational Journal of Steel Structures 18 (5) 1754 (2018)
https://doi.org/10.1007/s13296-018-0075-1
Deformation prediction and Finite Element Analyses of precision seamless tubes during cold drawing
Martin Necpal, Maroš Martinkovič, Ivan Buranský and N. BalcMATEC Web of Conferences 137 05005 (2017)
https://doi.org/10.1051/matecconf/201713705005
Analysis of Dynamic Bending Test Using Ultra High Speed DIC and the Virtual Fields Method
Behrad Koohbor, Addis Kidane, Michael A. Sutton, Xing Zhao and Silas MallonInternational Journal of Impact Engineering (2017)
https://doi.org/10.1016/j.ijimpeng.2016.12.021
The Science of Armour Materials
M. Saleh, L. Edwards and I.G. CrouchThe Science of Armour Materials 483 (2017)
https://doi.org/10.1016/B978-0-08-100704-4.00009-8
A dynamic constitutive-micromechanical model to predict the strain rate-dependent mechanical behavior of carbon nanofiber/epoxy nanocomposites
Mahmood M. Shokrieh, Ali Reza Shamaei Kashani and Reza MosalmaniIranian Polymer Journal 25 (6) 487 (2016)
https://doi.org/10.1007/s13726-016-0441-9
1780 060003 (2016)
https://doi.org/10.1063/1.4965956
The response of polymethyl methacrylate (PMMA) subjected to large strains, high strain rates, high pressures, a range in temperatures, and variations in the intermediate principal stress
T.J. Holmquist, J. Bradley, A. Dwivedi and D. CasemThe European Physical Journal Special Topics 225 (2) 343 (2016)
https://doi.org/10.1140/epjst/e2016-02636-5
On the Selection of Johnson-cook Constitutive Model Parameters for Ti-6Al-4V Using Three Types of Numerical Models of Orthogonal Cutting
Yancheng Zhang, J.C. Outeiro and Tarek MabroukiProcedia CIRP 31 112 (2015)
https://doi.org/10.1016/j.procir.2015.03.052
Constitutive Modeling During Simultaneous Forming and Quenching of a Boron Bearing Steel at High Temperatures
S. Salari, M. Naderi and W. BleckJournal of Materials Engineering and Performance 24 (2) 808 (2015)
https://doi.org/10.1007/s11665-014-1345-5
On the calibration strategies of the Johnson-Cook strength model: Discussion and applications to experimental data
Luca Gambirasio and Egidio RizziMaterials Science and Engineering: A (2014)
https://doi.org/10.1016/j.msea.2014.05.006
Material model uncertainty quantification using evidence theory
S Salehghaffari and M Rais-RohaniProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 227 (10) 2165 (2013)
https://doi.org/10.1177/0954406212473390
A new approach for determination of material constants of internal state variable based plasticity models and their uncertainty quantification
S. Salehghaffari, M. Rais-Rohani, E.B. Marin and D.J. BammannComputational Materials Science 55 237 (2012)
https://doi.org/10.1016/j.commatsci.2011.11.035
(2011)
https://doi.org/10.2514/6.2011-2155
(2011)
https://doi.org/10.2514/6.2011-2178
Determination of materials parameters under dynamic loading. Part I: Experiments and simulations
G.H. Majzoobi, F. Freshteh-Saniee, S. Faraj Zadeh Khosroshahi and H. Beik MohammadlooComputational Materials Science 49 (2) 192 (2010)
https://doi.org/10.1016/j.commatsci.2010.03.054
(2010)
https://doi.org/10.2514/6.2010-9277
A Phenomenological Constitutive Equation to Describe Various Flow Stress Behaviors of Materials in Wide Strain Rate and Temperature Regimes
Hyunho Shin and Jong-Bong KimJournal of Engineering Materials and Technology 132 (2) (2010)
https://doi.org/10.1115/1.4000225
Review of experimental techniques for high rate deformation and shock studies
J.E. Field, S.M. Walley, W.G. Proud, H.T. Goldrein and C.R. SiviourInternational Journal of Impact Engineering 30 (7) 725 (2004)
https://doi.org/10.1016/j.ijimpeng.2004.03.005
Gouge development during hypervelocity sliding impact
David J Laird and Anthony N PalazottoInternational Journal of Impact Engineering 30 (2) 205 (2004)
https://doi.org/10.1016/S0734-743X(03)00059-9
(2002)
https://doi.org/10.2514/6.2002-1691
Thermal Diffusion and Associated Stress Field due to High Speed Source
William P. Baker, Anthony N. Palazotto and David J. LairdJournal of Aerospace Engineering 15 (3) 118 (2002)
https://doi.org/10.1061/(ASCE)0893-1321(2002)15:3(118)
Optimizing material strength constants numerically extracted from taylor impact data
D. J. Allen, W. K. Rule and S. E. JonesExperimental Mechanics 37 (3) 333 (1997)
https://doi.org/10.1007/BF02317427
Lagrangian hydrocode simulations of rolled-homogeneous-armor plate perforation by a shaped charge jet
Martin N. RaftenbergInternational Journal of Impact Engineering 15 (5) 619 (1994)
https://doi.org/10.1016/0734-743X(94)90133-6