Modelling the Marangoni convection in laser heat treatment
J. Phys. IV France, 120 (2004) 299-306
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Direct Laser Interference Patterning of Nickel Electrodes: Enhanced Hydrogen Evolution and Bubble Dynamics through Surface Engineering
Vincent Piscitelli, Melisa J. Gomez, Daniel M. Olmi, Maximiliano Rossa, Gabriela I. Lacconi and Gustavo A. PinoACS Applied Energy Materials 9 (2) 953 (2026)
https://doi.org/10.1021/acsaem.5c03212
Integrating Computational Modeling and Experiments for the Additive Manufacturing of Copper-Based Antibacterial Coatings on 304SS Surface
Valentin Romanovski, Nickolay Sdobnyakov, Andrey Kolosov, Kseniya Savina, Mohammad Sharifian Gh, Nikita Nepsha, Denis Sokolov, Saravana Kumar M., Abhijit Bhowmik, Dmitry Moskovskikh, Marcos M. Pires and Elena RomanovskaiaACS Physical Chemistry Au 6 (1) 227 (2026)
https://doi.org/10.1021/acsphyschemau.5c00123
Modeling electron beam melting through electron trajectory control in electromagnetic fields for homogeneous titanium ingot manufacturing
HyunChul Kim, Soosung Kim, YongKwan Lee, Jae-Hong Shin, Donghyun Kim, SoongJu Oh and Kyoung-Tae ParkInternational Journal of Heat and Mass Transfer 242 126799 (2025)
https://doi.org/10.1016/j.ijheatmasstransfer.2025.126799
In-situ laser polishing morphology evolutionary behavior of additive manufacturing surfaces and prediction of surface roughness
Yunning Zhou, Min Wang, Xinran Mu, Minjiang Xie and Lihong LiangSurface and Coatings Technology 511 132302 (2025)
https://doi.org/10.1016/j.surfcoat.2025.132302
The Influence of Physical Phenomena and Material Properties on the Quality of Parts during Selective Laser Melting
Progress in Physics of Metals 26 (4) (2025)https://doi.org/10.15407/ufm.26.04.796
On the Investigation of a Sustainable Two Step Laser‐Based Surface Treatment for the Functionalization of Additive Manufactured Ti–6Al–4V Components
Ignacio Tabares, Marcelo Sallese, Marcos Soldera, Ugo Andral, Eddie Kavanagh, Aidan Cloonan, Flavio Soldera and Andrés Fabián LasagniAdvanced Engineering Materials 27 (22) (2025)
https://doi.org/10.1002/adem.202501224
Optimizing process for pulsed laser additive manufacturing of nickel-based single crystal superalloy
Shiwei Ci, Jingjing Liang, Jinguo Li, et al.Materials Research Express 10 (9) 096511 (2023)
https://doi.org/10.1088/2053-1591/acf7ad
Effect of B4C Addition on Microstructure and Wear Resistance of Laser Cladding NiCrBSi Coatings
Hongliang Ma, Yunlong Liang and Hanguang FuJOM 75 (2) 515 (2023)
https://doi.org/10.1007/s11837-022-05610-8
Effect of Cr3C2 Content on Microstructure and Properties of Laser Cladding Ti(C, B)/Ni Coatings
Liang Yunlong, Fu Hanguang, Xing Zhenguo, Guo Xingye and Lin JianJournal of Materials Engineering and Performance 31 (7) 5189 (2022)
https://doi.org/10.1007/s11665-022-06604-y
Effect of laser cladding parameters in NbC reinforced 316L austenitic stainless steel composite depositions on a mild steel
Luis Henrique Rodrigues Apolinário, Edwar Andres Torres, Helen Rodrigues Araújo, André de Albuquerque Vicente and Tiago Felipe de Abreu SantosThe International Journal of Advanced Manufacturing Technology 122 (7-8) 3095 (2022)
https://doi.org/10.1007/s00170-022-10067-9
Theoretical and experimental study of bulge formation in laser polishing of 304 stainless steel
Jilin Xu, Ping Zou, Di Kang and Wenjie WangJournal of Manufacturing Processes 66 39 (2021)
https://doi.org/10.1016/j.jmapro.2021.03.059
Study on the mechanism of surface topography evolution in melting and transition regimes of laser polishing
Jilin Xu, Ping Zou, Wenjie Wang and Di KangOptics & Laser Technology 139 106947 (2021)
https://doi.org/10.1016/j.optlastec.2021.106947
Ultrasonic vibration-assisted (UV-A) manufacturing processes: State of the art and future perspectives
Fuda Ning and Weilong CongJournal of Manufacturing Processes 51 174 (2020)
https://doi.org/10.1016/j.jmapro.2020.01.028
Switching between positive and negative movement near an air/water interface through lateral laser illumination
Mayu Shono, Satoshi Takatori, Jose M. Carnerero and Kenichi YoshikawaApplied Physics Letters 117 (7) (2020)
https://doi.org/10.1063/5.0015247
109 (2020)
https://doi.org/10.1016/B978-0-12-819600-7.00007-1
Numerical simulation of hydromagnetic Marangoni convection flow in a Darcian porous semiconductor melt enclosure with buoyancy and heat generation effects
O. Anwar Bég, K. Venkatadri, V. Ramachandra Prasad, T.A. Bég, A. Kadir and Henry J. LeonardMaterials Science and Engineering: B 261 114722 (2020)
https://doi.org/10.1016/j.mseb.2020.114722
Modeling of solidification microstructure evolution in laser powder bed fusion fabricated 316L stainless steel using combined computational fluid dynamics and cellular automata
Yi Zhang and Jing ZhangAdditive Manufacturing 28 750 (2019)
https://doi.org/10.1016/j.addma.2019.06.024
Effect of process parameters on the density and porosity of laser melted AlSi10Mg/SiC metal matrix composite
Omotoyosi H. Famodimu, Mark Stanford, Chike F. Oduoza and Lijuan ZhangFrontiers of Mechanical Engineering 13 (4) 520 (2018)
https://doi.org/10.1007/s11465-018-0521-y
TiC Reinforcement Composite Coating Produced Using Graphite of the Cast Iron by Laser Cladding
Yanhui Liu, Weicheng Qu and Yu SuMaterials 9 (10) 815 (2016)
https://doi.org/10.3390/ma9100815
Direct Laser Interference Patterning of Nickel Molds for Hot Embossing of Polymers
Andreas Rank, Tim Kunze, Tina Hoffmann and Andrés F. LasagniAdvanced Engineering Materials 18 (7) 1280 (2016)
https://doi.org/10.1002/adem.201600068
Experimental and numerical analyses of laser remelted Sn–0.7 wt%Cu solder surfaces
Bismarck Luiz Silva, José Eduardo Spinelli, Manuel V. Canté, et al.Journal of Materials Science: Materials in Electronics 26 (5) 3100 (2015)
https://doi.org/10.1007/s10854-015-2802-0
NUMERICAL SIMULATION OF MARANGONI MAGNETOHYDRODYNAMIC BIO-NANOFLUID CONVECTION FROM A NON-ISOTHERMAL SURFACE WITH MAGNETIC INDUCTION EFFECTS: A BIO-NANOMATERIAL MANUFACTURING TRANSPORT MODEL
O. ANWAR BÉG, M. FERDOWS, S. SHAMIMA and M. NAZRUL ISLAMJournal of Mechanics in Medicine and Biology 14 (03) 1450039 (2014)
https://doi.org/10.1142/S0219519414500390
Wetting Properties of Steel Surfaces Modified by Laser Interference Metallurgy
Brice Raillard, Justine Rémond, Esteban Ramos‐Moore, Nicolas Souza, Carsten Gachot and Frank MücklichAdvanced Engineering Materials 15 (5) 341 (2013)
https://doi.org/10.1002/adem.201200247
Interaction of micro-discharges in heptane with metallic multi-layers
A. Hamdan, J.-N. Audinot, C. Noel, et al.Applied Surface Science 274 378 (2013)
https://doi.org/10.1016/j.apsusc.2013.03.074
Fabrication and Characterization in the Micro-Nano Range
Andrés Fabián LasagniAdvanced Structured Materials, Fabrication and Characterization in the Micro-Nano Range 10 1 (2011)
https://doi.org/10.1007/978-3-642-17782-8_1
900 (2010)
https://doi.org/10.2351/1.5062135
Effects of Melt Pool Variables and Process Parameters in Laser Direct Metal Deposition of Aerospace Alloys
Kamran Shah, Andrew J. Pinkerton, Ahmad Salman and Lin LiMaterials and Manufacturing Processes 25 (12) 1372 (2010)
https://doi.org/10.1080/10426914.2010.480999
Direct Fabrication of Hierarchical Microstructures on Metals by Means of Direct Laser Interference Patterning
Matthias Bieda, Eckhard Beyer and Andrés F. LasagniJournal of Engineering Materials and Technology 132 (3) (2010)
https://doi.org/10.1115/1.4001835
Unusual wavy weld pool boundary from dimensional analysis
A. Arora, G.G. Roy and T. DebRoyScripta Materialia 60 (2) 68 (2009)
https://doi.org/10.1016/j.scriptamat.2008.08.035
Direct micro-patterning of aluminum substrates via laser interference metallurgy
M. D’Alessandria, A. Lasagni and F. MücklichApplied Surface Science 255 (5) 3210 (2008)
https://doi.org/10.1016/j.apsusc.2008.09.018
804 (2006)
https://doi.org/10.2351/1.5060851
1006 (2005)
https://doi.org/10.2351/1.5060406