Experimental characterisation of a Cu-based shape memory alloy toward its exploitation in passive control devices
J. Phys. IV France, 115 (2004) 299-306
Article cité par
La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).
Article cité :
Citations de cet article :
Microstructural and superficial modification in a Cu-Al-Be shape memory alloy due to superficial severe plastic deformation under sliding wear conditions
C G Figueroa, F N Garcia-Castillo, V H Jacobo, J Cortés-Pérez and R SchouwenaarsIOP Conference Series: Materials Science and Engineering 194 012011 (2017)
https://doi.org/10.1088/1757-899X/194/1/012011
FNCATB Superelastic damper for seismic vibration mitigation
Sutanu Bhowmick and Sudib Kumar MishraJournal of Intelligent Material Systems and Structures 27 (15) 2062 (2016)
https://doi.org/10.1177/1045389X15620039
Feasibility of tension braces using Cu-Al-Mn superelastic alloy bars
Yoshikazu Araki, Nao Maekawa, Kshitij C. Shrestha, et al.Structural Control and Health Monitoring 21 (10) 1304 (2014)
https://doi.org/10.1002/stc.1644
Rate-dependent response of superelastic Cu–Al–Mn alloy rods to tensile cyclic loads
Yoshikazu Araki, Nao Maekawa, Toshihiro Omori, et al.Smart Materials and Structures 21 (3) 032002 (2012)
https://doi.org/10.1088/0964-1726/21/3/032002
Robust structural control with system constraints
Annibale Luigi Materazzi and Filippo UbertiniStructural Control and Health Monitoring 19 (3) 472 (2012)
https://doi.org/10.1002/stc.447
Effect of grain size on the stress–temperature relationship in a β CuAlBe shape memory alloy
S. Montecinos, A. Cuniberti and R. RomeroIntermetallics 19 (1) 35 (2011)
https://doi.org/10.1016/j.intermet.2010.09.002
Combined use of FBG sensors and SMA actuators for concrete beams repair
Federica Daghia, Alessio Giammarruto and Giovanni PascaleStructural Control and Health Monitoring 18 (8) 908 (2011)
https://doi.org/10.1002/stc.410
Potential of superelastic Cu–Al–Mn alloy bars for seismic applications
Y. Araki, T. Endo, T. Omori, et al.Earthquake Engineering & Structural Dynamics 40 (1) 107 (2011)
https://doi.org/10.1002/eqe.1029
Fatigue tests on SMA bars in span control
Sara Casciati and Alessandro MarziEngineering Structures 33 (4) 1232 (2011)
https://doi.org/10.1016/j.engstruct.2010.12.045
Toward a hybrid control solution for cable dynamics: Theoretical prediction and experimental validation
Lucia Faravelli, Clemente Fuggini and Filippo UbertiniStructural Control and Health Monitoring n/a (2009)
https://doi.org/10.1002/stc.313
A passive control device with SMA components: from the prototype to the model
Fabio Casciati and Lucia FaravelliStructural Control and Health Monitoring n/a (2009)
https://doi.org/10.1002/stc.328
Seismic performance of benchmark base-isolated bridges with superelastic Cu-Al-Be restraining damping device
Yunfeng Zhang, Xiaobin Hu and Songye ZhuStructural Control and Health Monitoring 16 (6) 668 (2009)
https://doi.org/10.1002/stc.327
Modelling the uncertainty in the response of a base isolator
Fabio Casciati and Karim HamdaouiProbabilistic Engineering Mechanics 23 (4) 427 (2008)
https://doi.org/10.1016/j.probengmech.2007.10.014
Variability in mechanical properties and microstructure characterization of CuAlBe shape memory alloys for vibration mitigation
Fabio Casciati and Casper van der EijkSmart Structures and Systems 4 (2) 103 (2008)
https://doi.org/10.12989/sss.2008.4.2.103
Application of shape memory alloy prestressing devices on an ancient aqueduct
Christis Z. Chrysostomou, Andreas Stassis, Themos Demetriourder and Karim HamdaouiSmart Structures and Systems 4 (2) 261 (2008)
https://doi.org/10.12989/sss.2008.4.2.261
Cable vibration mitigation by added SMA wires
F. Casciati, L. Faravelli and C. FugginiActa Mechanica 195 (1-4) 141 (2008)
https://doi.org/10.1007/s00707-007-0541-x
Grain size and pseudoelastic behaviour of a Cu–Al–Be alloy
S. Montecinos, A. Cuniberti and A. SepúlvedaMaterials Characterization 59 (2) 117 (2008)
https://doi.org/10.1016/j.matchar.2006.11.009
Health-monitoring and system-identification of an ancient aqueduct
Christis Z. Chrysostomou and Andreas StassisSmart Structures and Systems 4 (2) 183 (2008)
https://doi.org/10.12989/sss.2008.4.2.183
Mechanical properties of superelastic Cu–Al–Be wires at cold temperatures for the seismic protection of bridges
Yunfeng Zhang, Joseph A Camilleri and Songye ZhuSmart Materials and Structures 17 (2) 025008 (2008)
https://doi.org/10.1088/0964-1726/17/2/025008
Steel beam–column connection using copper-based shape memory alloy dampers
José Sepúlveda, Rubén Boroschek, Ricardo Herrera, Ofelia Moroni and Mauricio SarrazinJournal of Constructional Steel Research 64 (4) 429 (2008)
https://doi.org/10.1016/j.jcsr.2007.09.002
Experimental and numerical studies toward the implementation of shape memory alloy ties in masonry structures
Sara Casciati and Karim HamdaouiSmart Structures and Systems 4 (2) 153 (2008)
https://doi.org/10.12989/sss.2008.4.2.153
Effect of SMA Braces in a Steel Frame Building
Ruben L. Boroschek, Gloria Farias, Ofelia Moroni and Mauricio SarrazinJournal of Earthquake Engineering 11 (3) 326 (2007)
https://doi.org/10.1080/13632460601125763
Performance of a base isolator with shape memory alloy bars
Fabio Casciati, Lucia Faravelli and Karim HamdaouiEarthquake Engineering and Engineering Vibration 6 (4) 401 (2007)
https://doi.org/10.1007/s11803-007-0787-2
Structural Engineering with NiTi . II: Mechanical Behavior and Scaling
Jason McCormick, Jeff Tyber, Reginald DesRoches, Ken Gall and Hans J. MaierJournal of Engineering Mechanics 133 (9) 1019 (2007)
https://doi.org/10.1061/(ASCE)0733-9399(2007)133:9(1019)