Modeling of strain rates and temperature effects on the yield behavior of amorphous polymers
J. Phys. IV France, 110 (2003) 39-44
Article cité par
La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).
Article cité :
Citations de cet article :
Aging behavior of fully 3D printed microfluidic devices
Petr Shvets, Viktor Shapovalov, Daniil Azarov, Alexey Kolesnikov, Pavel Prokopovich, Alexander Popov, Sergei Chapek, Alexander Guda, Mark Leshchinsky, Alexander Soldatov and Alexander GoikhmanThe International Journal of Advanced Manufacturing Technology 134 (1-2) 569 (2024)
https://doi.org/10.1007/s00170-024-14149-8
Development of the Johnson-Cook flow stress and damage parameters for the impact response of polycarbonate: Experimental and numerical approach
Mustafa Sarıkaya, Mustafa Güden, Çağdaş Kambur, Sevim Çankaya Özbek and Alper TaşdemirciInternational Journal of Impact Engineering 179 104674 (2023)
https://doi.org/10.1016/j.ijimpeng.2023.104674
A Review on the Modeling of the Elastic Modulus and Yield Stress of Polymers and Polymer Nanocomposites: Effect of Temperature, Loading Rate and Porosity
Reema H. Alasfar, Said Ahzi, Nicolas Barth, et al.Polymers 14 (3) 360 (2022)
https://doi.org/10.3390/polym14030360
Effect of cross-head speed and temperature on the mechanical properties of polypropylene and glass fiber reinforced polypropylene pipes
R. Singer, A.M. Ollick and M. ElhadaryAlexandria Engineering Journal 60 (6) 4947 (2021)
https://doi.org/10.1016/j.aej.2021.03.073
Identification of the LLDPE Constitutive Material Model for Energy Absorption in Impact Applications
Luděk Hynčík, Petra Kochová, Jan Špička, et al.Polymers 13 (10) 1537 (2021)
https://doi.org/10.3390/polym13101537
Modeling the mechanical response of polymers and nano‐filled polymers: Effects of porosity and fillers content
Reema Alasfar, Saïd Ahzi, Kui Wang and Nicolas BarthJournal of Applied Polymer Science 137 (47) (2020)
https://doi.org/10.1002/app.49545
A comparative experimental study of the hygroscopic and mechanical behaviors of electrospun nanofiber membranes and solution‐cast films of polybenzimidazole
Oksana Zholobko, Xiang‐Fa Wu, Zhengping Zhou, et al.Journal of Applied Polymer Science 137 (39) (2020)
https://doi.org/10.1002/app.49639
A thermodynamic analysis of Argon's yield stress model: Extended influence of strain rate and temperature
C.A. Bernard, J.P.M. Correia and S. AhziMechanics of Materials 130 20 (2019)
https://doi.org/10.1016/j.mechmat.2018.12.013
Experimental evaluation of the elastic limit of carbon‐fibre reinforced epoxy composites under a large range of strain rate and temperature conditions
M. Castres, J. Berthe, E. Deletombe and M. BrieuStrain 53 (6) (2017)
https://doi.org/10.1111/str.12248
Experimentally simulating adiabatic conditions: Approximating high rate polymer behavior using low rate experiments with temperature profiles
Michael J. Kendall and Clive R. SiviourPolymer 54 (18) 5058 (2013)
https://doi.org/10.1016/j.polymer.2013.06.049
Effect of molecular structures on dynamic compression properties of polyethylene
Mohd Firdaus Omar, Hazizan Md Akil and Zainal Arifin AhmadMaterials Science and Engineering: A 538 125 (2012)
https://doi.org/10.1016/j.msea.2011.12.111
Measurement and prediction of compressive properties of polymers at high strain rate loading
Mohd Firdaus Omar, Hazizan Md Akil and Zainal Arifin AhmadMaterials & Design 32 (8-9) 4207 (2011)
https://doi.org/10.1016/j.matdes.2011.04.037
Predictive nonlinear constitutive relations in polymers through loss history
David Porter and Peter J. GouldInternational Journal of Solids and Structures 46 (9) 1981 (2009)
https://doi.org/10.1016/j.ijsolstr.2009.01.012
Thermodynamic investigation of yield-stress models for amorphous polymers
J. Richeton, S. Ahzi and L. DaridonPhilosophical Magazine 87 (24) 3629 (2007)
https://doi.org/10.1080/14786430701381162
Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates
J. Richeton, S. Ahzi, K.S. Vecchio, F.C. Jiang and A. MakradiInternational Journal of Solids and Structures 44 (24) 7938 (2007)
https://doi.org/10.1016/j.ijsolstr.2007.05.018
The influence of matrix modification on fracture mechanisms in rubber toughened polymethylmethacrylate
Laure Lalande, Christopher J.G. Plummer, Jan-Anders E. Månson and Pierre GérardPolymer 47 (7) 2389 (2006)
https://doi.org/10.1016/j.polymer.2006.02.016
Postspinning draw of polymeric fibers: Multiscale micromechanical model for a solid polymer under finite deformation and strain‐induced crystallization
A. Makradi, C. L. Cox, S. Ahzi and S. BelouettarJournal of Applied Polymer Science 100 (3) 2259 (2006)
https://doi.org/10.1002/app.22766
Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: Characterization and modeling of the compressive yield stress
J. Richeton, S. Ahzi, K.S. Vecchio, F.C. Jiang and R.R. AdharapurapuInternational Journal of Solids and Structures 43 (7-8) 2318 (2006)
https://doi.org/10.1016/j.ijsolstr.2005.06.040
A formulation of the cooperative model for the yield stress of amorphous polymers for a wide range of strain rates and temperatures
J. Richeton, S. Ahzi, L. Daridon and Y. RémondPolymer 46 (16) 6035 (2005)
https://doi.org/10.1016/j.polymer.2005.05.079
A unified model for stiffness modulus of amorphous polymers across transition temperatures and strain rates
J. Richeton, G. Schlatter, K.S. Vecchio, Y. Rémond and S. AhziPolymer 46 (19) 8194 (2005)
https://doi.org/10.1016/j.polymer.2005.06.103