Article cité par

La fonctionnalité Article cité par… liste les citations d'un article. Ces citations proviennent de la base de données des articles de EDP Sciences, ainsi que des bases de données d'autres éditeurs participant au programme CrossRef Cited-by Linking Program. Vous pouvez définir une alerte courriel pour être prévenu de la parution d'un nouvel article citant " cet article (voir sur la page du résumé de l'article le menu à droite).

Article cité :

Analytical Shear-Band Process Zone Model Incorporating Nonlinear Viscous Effects and Initial Defects

J.D. Clayton
Journal of Applied Mechanics 92 (9) (2025)
https://doi.org/10.1115/1.4068648

Comparative Analysis on Modelling Approaches for the Simulation of Fatigue Disbonding with Cohesive Zone Models

Johan Birnie, Maria Pia Falaschetti and Enrico Troiani
Aerospace 12 (2) 139 (2025)
https://doi.org/10.3390/aerospace12020139

On the formulation and implementation of extrinsic cohesive zone models with contact

N.A. Collins-Craft, F. Bourrier and V. Acary
Computer Methods in Applied Mechanics and Engineering 400 115545 (2022)
https://doi.org/10.1016/j.cma.2022.115545

Advances of Science and Technology

Habtamu A. Tadesse, Temesgen Wondimu Aure and Alemayehu Golla Gualu
Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, Advances of Science and Technology 412 15 (2022)
https://doi.org/10.1007/978-3-030-93712-6_2

Comparison of Lightweight Structures in Bearing Impact Loads during Ice–Hull Interaction

Harsha Cheemakurthy, Zuheir Barsoum, Magnus Burman and Karl Garme
Journal of Marine Science and Engineering 10 (6) 794 (2022)
https://doi.org/10.3390/jmse10060794

Enhanced cohesive zone model to predict delamination behavior of carbon/epoxy laminated curved beams

David Ranz, Jesús Cuartero, Luis Castejón, Ramón Miralbes and David Valladares
Mechanics of Advanced Materials and Structures 29 (3) 331 (2022)
https://doi.org/10.1080/15376494.2020.1769232

Prediction of Cohesive Zone Length and Accurate Numerical Simulation of Delamination under Mixed-mode Loading

Chetan H. C., Subhaschandra Kattimani and S. M. Murigendrappa
Applied Composite Materials 28 (6) 1861 (2021)
https://doi.org/10.1007/s10443-021-09939-2

Dynamic cracking simulation by the nonlocal macro‐meso‐scale damage model for isotropic materials

Guangda Lu and Jianbing Chen
International Journal for Numerical Methods in Engineering 122 (12) 3070 (2021)
https://doi.org/10.1002/nme.6654

Study on the cohesive edge crack in a square plate with the cohesive element method

Leon Kellner, Wenjun Lu, Sören Ehlers and Knut V. Høyland
International Journal of Fracture (2021)
https://doi.org/10.1007/s10704-021-00560-9

Finite element analysis of concrete cracking: a comparative study between a diffuse interface model and an embedded crack model

Umberto De Maio, David Cendón, Fabrizio Greco, et al.
Procedia Structural Integrity 33 954 (2021)
https://doi.org/10.1016/j.prostr.2021.10.106

Investigation of concrete cracking phenomena by using cohesive fracture-based techniques: A comparison between an embedded crack model and a refined diffuse interface model

Umberto De Maio, David Cendón, Fabrizio Greco, et al.
Theoretical and Applied Fracture Mechanics 115 103062 (2021)
https://doi.org/10.1016/j.tafmec.2021.103062

Three-dimensional modeling of fracture in quasi-brittle materials using plasticity and cohesive finite elements

Raul Durand and Fernando Hipólito Barros Trinidade da Silva
International Journal of Fracture 228 (1) 45 (2021)
https://doi.org/10.1007/s10704-021-00514-1

Integration of an adaptive cohesive zone and continuum ductile fracture model to simulate crack propagation in steel structures

Vincente Pericoli, Xai Lao, Andy Ziccarelli, Amit Kanvinde and Gregory Deierlein
Engineering Fracture Mechanics 258 108041 (2021)
https://doi.org/10.1016/j.engfracmech.2021.108041

Failure Modeling and Sensitivity Analysis of Ceramics Under Impact

Amartya Bhattacharjee, Anindya Bhaduri, Ryan C. Hurley and Lori Graham-Brady
Journal of Applied Mechanics 88 (5) (2021)
https://doi.org/10.1115/1.4049807

A cohesive zone model approach to interlaminar behaviour of carbon/epoxy laminated curved beams

David Ranz, Jesus Cuartero, Luis Castejon, Ramon Miralbes and Hugo Malon
Composite Structures 238 111983 (2020)
https://doi.org/10.1016/j.compstruct.2020.111983

Finite element analysis and acoustic emission monitoring of progressive failure of corrugated core composite structures

Fatih E. Oz, Emre Calik and Nuri Ersoy
Composite Structures 253 112775 (2020)
https://doi.org/10.1016/j.compstruct.2020.112775

A variational multiscale discontinuous Galerkin formulation for both implicit and explicit dynamic modeling of interfacial fracture

Sunday C. Aduloju and Timothy J. Truster
Computer Methods in Applied Mechanics and Engineering 343 602 (2019)
https://doi.org/10.1016/j.cma.2018.08.025

A computationally efficient cohesive zone model for fatigue

Sarmed Salih, Keith Davey and Zhenmin Zou
Fatigue & Fracture of Engineering Materials & Structures 42 (2) 518 (2019)
https://doi.org/10.1111/ffe.12927

A refined diffuse cohesive approach for the failure analysis in quasibrittle materials—part II: Application to plain and reinforced concrete structures

Umberto De Maio, Fabrizio Greco, Lorenzo Leonetti, et al.
Fatigue & Fracture of Engineering Materials & Structures 42 (12) 2764 (2019)
https://doi.org/10.1111/ffe.13115

A methodology to simulate low velocity impact and compression after impact in large composite stiffened panels

A. Soto, E.V. González, P. Maimí, et al.
Composite Structures 204 223 (2018)
https://doi.org/10.1016/j.compstruct.2018.07.081

Cohesive zone modeling of crack propagation influenced by martensitic phase transformation

Sally Issa, Sara Eliasson, Alexander Lundberg, Mathias Wallin and Håkan Hallberg
Materials Science and Engineering: A (2017)
https://doi.org/10.1016/j.msea.2017.12.009

On the assessment of the load-bearing capacity of Z-pinned composite T-joint under out-of-plane tension

Dajun Huan, Yong Li, Yan Tan, Xiangyang Zhang and Jun Xiao
Journal of Reinforced Plastics and Composites 36 (22) 1639 (2017)
https://doi.org/10.1177/0731684417722409

Adaptive modelling of delamination initiation and propagation using an equivalent single‐layer shell approach

Johannes Främby, Martin Fagerström and Jim Brouzoulis
International Journal for Numerical Methods in Engineering 112 (8) 882 (2017)
https://doi.org/10.1002/nme.5536

3D dynamic fragmentation with parallel dynamic insertion of cohesive elements

M. Vocialta, N. Richart and J.‐F. Molinari
International Journal for Numerical Methods in Engineering 109 (12) 1655 (2017)
https://doi.org/10.1002/nme.5339

Strain injection techniques in dynamic fracture modeling

O. Lloberas-Valls, A.E. Huespe, J. Oliver and I.F. Dias
Computer Methods in Applied Mechanics and Engineering (2016)
https://doi.org/10.1016/j.cma.2016.05.023

Analysis of the Numerical and Geometrical Parameters Influencing the Simulation of Mode I and Mode II Delamination Growth in Unidirectional and Textile Composites

S. Jacques, I. De Baere and W. Van Paepegem
Applied Composite Materials 22 (6) 637 (2015)
https://doi.org/10.1007/s10443-014-9429-9

Softening behaviour modelling of aluminium alloy 6082 using a non-linear cohesive zone law

Kyungmok Kim
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 229 (5) 431 (2015)
https://doi.org/10.1177/1464420714525134

Dynamic crack propagation in a heterogeneous ceramic microstructure, insights from a cohesive model

S.M. Taheri Mousavi, N. Richart, C. Wolff and J.F. Molinari
Acta Materialia 88 136 (2015)
https://doi.org/10.1016/j.actamat.2015.01.003

A stochastic description on the traction-separation law of an interface with non-covalent bonding

Yujie Wei
Journal of the Mechanics and Physics of Solids 70 227 (2014)
https://doi.org/10.1016/j.jmps.2014.05.014

Fluid effect on hydraulic fracture propagation behavior: a comparison between water and supercritical CO2‐like fluid

X. Zhou and T. J. Burbey
Geofluids 14 (2) 174 (2014)
https://doi.org/10.1111/gfl.12061

Numerical Simulations of Dynamic Fracture Growth Based on a Cohesive Zone Model with Microcracks

Liqiang Lin, Rahul Dhanawade and Xiaowei Zeng
Journal of Nanomechanics and Micromechanics 4 (3) (2014)
https://doi.org/10.1061/(ASCE)NM.2153-5477.0000096

Distinguishing fluid injection induced ground deformation caused by fracture pressurization from porous medium pressurization

Xuejun Zhou and Thomas J. Burbey
Journal of Petroleum Science and Engineering (2014)
https://doi.org/10.1016/j.petrol.2014.06.028

The dynamics of rapid fracture: instabilities, nonlinearities and length scales

Eran Bouchbinder, Tamar Goldman and Jay Fineberg
Reports on Progress in Physics 77 (4) 046501 (2014)
https://doi.org/10.1088/0034-4885/77/4/046501

Progressive failure analysis of perforated aluminium/CFRP fibre metal laminates using a combined elastoplastic damage model and including delamination effects

Jing-Fen Chen, Evgeny V. Morozov and Krishnakumar Shankar
Composite Structures 114 64 (2014)
https://doi.org/10.1016/j.compstruct.2014.03.046

Full Fluid–Solid Cohesive Finite-Element Model to Simulate Near Wellbore Fractures

Saeed Salehi and Runar Nygaard
Journal of Energy Resources Technology 137 (1) 012903 (2014)
https://doi.org/10.1115/1.4028251

3D Nonlinear XFEM Simulation of Delamination in Unidirectional Composite Laminates: A Sensitivity Analysis of Modeling Parameters

Damoon Motamedi and Abbas S. Milani
Open Journal of Composite Materials 03 (04) 113 (2013)
https://doi.org/10.4236/ojcm.2013.34012

Experiments and Three-Dimensional Modeling of Delamination in an Encapsulated Microelectronic Package Under Thermal Loading

Siow Ling Ho, Shailendra P. Joshi and Andrew A. O. Tay
IEEE Transactions on Components, Packaging and Manufacturing Technology 3 (11) 1859 (2013)
https://doi.org/10.1109/TCPMT.2013.2266406

Computational Methods for Fracture in Brittle and Quasi-Brittle Solids: State-of-the-Art Review and Future Perspectives

Timon Rabczuk
ISRN Applied Mathematics 2013 1 (2013)
https://doi.org/10.1155/2013/849231

Cohesive Zone Models: A Critical Review of Traction-Separation Relationships Across Fracture Surfaces

Kyoungsoo Park and Glaucio H. Paulino
Applied Mechanics Reviews 64 (6) 060802 (2013)
https://doi.org/10.1115/1.4023110

Quasi-explicit time-integration schemes for dynamic fracture with set-valued cohesive zone models

D. Doyen, A. Ern and S. Piperno
Computational Mechanics 52 (2) 401 (2013)
https://doi.org/10.1007/s00466-012-0819-2

Numerical study on the effects of hierarchical wavy interface morphology on fracture toughness

Bing-Wei Li, Hong-Ping Zhao, Qing-Hua Qin, Xi-Qiao Feng and Shou-Wen Yu
Computational Materials Science 57 14 (2012)
https://doi.org/10.1016/j.commatsci.2011.01.032

Simulation of Ductile Fracture of Slabs Subjected to Dynamic Loading Using Cohesive Elements

K. Nilsson and P. Lidström
International Journal of Damage Mechanics 21 (6) 871 (2012)
https://doi.org/10.1177/1056789511420892

An atomistic-based interphase zone model for crystalline solids

Shaofan Li, Xiaowei Zeng, Bo Ren, et al.
Computer Methods in Applied Mechanics and Engineering 229-232 87 (2012)
https://doi.org/10.1016/j.cma.2012.03.023

Dynamic crack growth: Analytical and numerical cohesive zone models approaches from basic tests to industrial structures

G. Debruyne, J. Laverne and P.E. Dumouchel
Engineering Fracture Mechanics 90 1 (2012)
https://doi.org/10.1016/j.engfracmech.2012.04.002

Numerical Modeling of Concrete Cracking

Alfredo E. Huespe and Javier Oliver
CISM International Centre for Mechanical Sciences, Numerical Modeling of Concrete Cracking 532 99 (2011)
https://doi.org/10.1007/978-3-7091-0897-0_3

Cohesive zone criterion for cracking along the Cu/Si interface in nanoscale components

Yabin Yan, Takashi Sumigawa, Fulin Shang and Takayuki Kitamura
Engineering Fracture Mechanics 78 (17) 2935 (2011)
https://doi.org/10.1016/j.engfracmech.2011.08.010

The role of cohesive properties on intergranular crack propagation in brittle polycrystals

Z Shabir, E Van der Giessen, C A Duarte and A Simone
Modelling and Simulation in Materials Science and Engineering 19 (3) 035006 (2011)
https://doi.org/10.1088/0965-0393/19/3/035006

Advances in Ceramics Armor VI

Reuben H. Kraft, Iskander (Sasha) Batyrev, Sukbin Lee, A.D.(Tony) Rollett and Betsy Rice
Ceramic Engineering and Science Proceedings, Advances in Ceramics Armor VI 31 143 (2010)
https://doi.org/10.1002/9780470944004.ch13

A generalized cohesive element technique for arbitrary crack motion

Spandan Maiti, Dipankar Ghosh and Ghatu Subhash
Finite Elements in Analysis and Design 45 (8-9) 501 (2009)
https://doi.org/10.1016/j.finel.2009.02.003

Computational micromechanics of dynamic compressive loading of a brittle polycrystalline material using a distribution of grain boundary properties

R.H. Kraft, J.F. Molinari, K.T. Ramesh and D.H. Warner
Journal of the Mechanics and Physics of Solids 56 (8) 2618 (2008)
https://doi.org/10.1016/j.jmps.2008.03.009

A new crack tip element for the phantom‐node method with arbitrary cohesive cracks

Timon Rabczuk, Goangseup Zi, Axel Gerstenberger and Wolfgang A. Wall
International Journal for Numerical Methods in Engineering 75 (5) 577 (2008)
https://doi.org/10.1002/nme.2273

Quasi‐static crack propagation in plane and plate structures using set‐valued traction‐separation laws

Pedro M. A. Areias and Timon Rabczuk
International Journal for Numerical Methods in Engineering 74 (3) 475 (2008)
https://doi.org/10.1002/nme.2182

A comparison of finite element and atomistic modelling of fracture

V R Coffman, J P Sethna, G Heber, et al.
Modelling and Simulation in Materials Science and Engineering 16 (6) 065008 (2008)
https://doi.org/10.1088/0965-0393/16/6/065008

Three-dimensional crack initiation, propagation, branching and junction in non-linear materials by an extended meshfree method without asymptotic enrichment

Stéphane Bordas, Timon Rabczuk and Goangseup Zi
Engineering Fracture Mechanics 75 (5) 943 (2008)
https://doi.org/10.1016/j.engfracmech.2007.05.010

Modeling of Dynamic Fracture and Damage in Two-Dimensional Trabecular Bone Microstructures Using the Cohesive Finite Element Method

Vikas Tomar
Journal of Biomechanical Engineering 130 (2) (2008)
https://doi.org/10.1115/1.2903434

Discontinuous modelling of shear bands using adaptive meshfree methods

T. Rabczuk and E. Samaniego
Computer Methods in Applied Mechanics and Engineering 197 (6-8) 641 (2008)
https://doi.org/10.1016/j.cma.2007.08.027

Numerical difficulties and computational procedures for thermo-hydro-mechanical coupled problems of saturated porous media

L. Simoni, S. Secchi and B. A. Schrefler
Computational Mechanics 43 (1) 179 (2008)
https://doi.org/10.1007/s00466-008-0302-2

Unstable and limited crack propagation

Bing Tie, Haithem Adouani, Clotilde Berdin and Silvère Cattet
European Journal of Computational Mechanics 17 (5-7) 663 (2008)
https://doi.org/10.3166/remn.17.663-675

Coupled Quantum–Atomistic and Quantum–Continuum Mechanics Methods in Materials Research

Ashwin Ramasubramaniam and Emily A. Carter
MRS Bulletin 32 (11) 913 (2007)
https://doi.org/10.1557/mrs2007.188

Extrinsic cohesive modelling of dynamic fracture and microbranching instability in brittle materials

Zhengyu (Jenny) Zhang, Glaucio H. Paulino and Waldemar Celes
International Journal for Numerical Methods in Engineering 72 (8) 893 (2007)
https://doi.org/10.1002/nme.2030

The cohesive element approach to dynamic fragmentation: the question of energy convergence

J. F. Molinari, G. Gazonas, R. Raghupathy, A. Rusinek and F. Zhou
International Journal for Numerical Methods in Engineering 69 (3) 484 (2007)
https://doi.org/10.1002/nme.1777

Work of adhesion in laser-induced delamination along polymer-metal interfaces

A. Fedorov, R. van Tijum, W. P. Vellinga and J. Th. M. De Hosson
Journal of Applied Physics 101 (4) 043520 (2007)
https://doi.org/10.1063/1.2434805

A combined dislocation—cohesive zone model for fracture in a confined ductile layer

Nils C. Broedling, Alexander Hartmaier and Huajian Gao
International Journal of Fracture 140 (1-4) 169 (2006)
https://doi.org/10.1007/s10704-005-6025-x

An improved description of the exponential Xu and Needleman cohesive zone law for mixed-mode decohesion

M.J. van den Bosch, P.J.G. Schreurs and M.G.D. Geers
Engineering Fracture Mechanics 73 (9) 1220 (2006)
https://doi.org/10.1016/j.engfracmech.2005.12.006

Simulation of dynamic ductile crack growth using strain-rate and triaxiality-dependent cohesive elements

M. Anvari, I. Scheider and C. Thaulow
Engineering Fracture Mechanics 73 (15) 2210 (2006)
https://doi.org/10.1016/j.engfracmech.2006.03.016