Phase Transformations and Mechanical Properties of Fe-Mn-Si-Al TRIP-Steels
J. Phys. IV France, 07 C5 (1997) C5-383-C5-388
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Influence of build orientation on mechanical properties of Fe–22Mn–9Al–1C lightweight steel fabricated by selective laser melting
Zixian Gu, Bao Guo, Chun Yu and Yanjin LuJournal of Materials Science 61 (21) 15172 (2026)
https://doi.org/10.1007/s10853-026-12717-9
Microstructure and Crystallographic Texture Evolution in Dual-Phase High-Mn Low-Density Steel during Homogenization
Kishan Bharti and Nitin Kumar SharmaJournal of Materials Engineering and Performance (2026)
https://doi.org/10.1007/s11665-026-13157-x
Adapting medium manganese steels for different wear conditions: insights from aluminum modification
Lin-lv Xu, Zhi-bin Zheng, Hao-kun Yang, Zhi-biao Xu, Jun Long, Shuai Wang, Si-yong Zhao and Hai-yan WangJournal of Iron and Steel Research International 32 (10) 3504 (2025)
https://doi.org/10.1007/s42243-025-01516-2
Component Surfaces
Marek Smaga, Tilmann Beck, Michael Kopnarski, et al.Springer Series in Advanced Manufacturing, Component Surfaces 289 (2024)
https://doi.org/10.1007/978-3-031-35575-2_12
Efficient ab initio stacking fault energy mapping for dilute interstitial alloys
Frank Niessen, Konstantin V. Werner, Wei Li, Song Lu, Levente Vitos, Matteo Villa and Marcel A.J. SomersComputational Materials Science 231 112542 (2024)
https://doi.org/10.1016/j.commatsci.2023.112542
Thermodynamic Prediction and Experimental Verification of Transformation‐Induced Plasticity/Twinning‐Induced Plasticity Effects in Advanced Low‐C High‐Mn Steel at Different Deformation Temperatures
Aleksandra Kozłowska, Jarosław Opara, Piotr Stawarczyk, Krzysztof Radwański and Adam GrajcarAdvanced Engineering Materials 26 (11) (2024)
https://doi.org/10.1002/adem.202400207
Formation of Heterogeneous Nucleation of B2-NiAl in Hot Rolled Fe-Mn-Al-C Plate: A Novel Composition and Processing Route for Lightweight High Strength Steel Containing Nickel
Michael Piston, Laura Bartlett, Krista R. Limmer, Daniel M. Field and Billy C. HornbuckleMetals 14 (12) 1342 (2024)
https://doi.org/10.3390/met14121342
Research Status of High-Manganese High-Aluminum Steel and Key Points of Continuous Casting
Guo-Xing Qiu, Jia-Ning Li, Kui Chen, Guang Xu, Yong-Kun Yang and Xiao-Ming LiJOM 76 (12) 7011 (2024)
https://doi.org/10.1007/s11837-024-06651-x
Thermodynamic modeling of stacking fault energy in Fe–Mn–C austenitic steels
Xinlong Yang and Peng LanHigh Temperature Materials and Processes 43 (1) (2024)
https://doi.org/10.1515/htmp-2024-0053
Effect of Ti micro-addition on the hot tensile behaviour, microstructure and fractography of low-C high-manganese steels
Gabriela Fojt-Dymara, Marek Opiela, Barbara Grzegorczyk, Klaudiusz Gołombek and Adam GrajcarArchives of Civil and Mechanical Engineering 24 (3) (2024)
https://doi.org/10.1007/s43452-024-00980-z
Favourable conditions for strain induced transformations in unstable high-manganese steel
Joanna Kowalska, Janusz Ryś and Agnieszka RadziszewskaMaterials Characterization 211 113884 (2024)
https://doi.org/10.1016/j.matchar.2024.113884
Effect of Rolling Temperature on Martensitic Transformation and Strain Hardening of Fe–21.2Mn–0.68C Steel
E. Dryzek, M. Wróbel, Ł. Rogal and M. SarnekMetallurgical and Materials Transactions A 55 (3) 839 (2024)
https://doi.org/10.1007/s11661-023-07289-1
The evolution of deformation twinning microstructures in random face-centered cubic solid solutions
Ritesh Jagatramka, Junaid Ahmed and Matthew DalyJournal of Applied Physics 133 (5) (2023)
https://doi.org/10.1063/5.0135538
Enhanced mechanical properties of a Fe-Mn-Al-C austenitic low-density steel by increasing hot-rolling reduction
Ziyuan Gao, Qingfeng Kang, Xueliang An, Hui Wang, Cunyu Wang and Wenquan CaoMaterials Characterization 204 113237 (2023)
https://doi.org/10.1016/j.matchar.2023.113237
Effect of low aluminum additions in the microstructure and mechanical properties of hot forged high-manganese steels
E.U. Morales-Cruz, M. Vargas-Ramírez, A. Lobo-Guerrero, et al.Journal of Mining and Metallurgy, Section B: Metallurgy 59 (1) 77 (2023)
https://doi.org/10.2298/JMMB220919007M
Features and Restrictions of Electroslag Remelting with Silica‐Bearing Slags for Lightweight High Manganese Steel
Lev Medovar, Ganna Stovpchenko, Liudmila Lisova, Zhouhua Jiang, Yanwu Dong and Congpeng Kangsteel research international 94 (11) (2023)
https://doi.org/10.1002/srin.202300161
Improving Mechanical Properties of a Forged High-Manganese Alloy by Regulating Carbon Content and Carbide Precipitation
Zhizhou Pan, Tao Liu, Jiang Li, et al.Metals 12 (3) 473 (2022)
https://doi.org/10.3390/met12030473
Material oriented crash-box design – Combining structural and material design to improve specific energy absorption
Sebastian Wesselmecking, Marion Kreins, Martin Dahmen and Wolfgang BleckMaterials & Design 213 110357 (2022)
https://doi.org/10.1016/j.matdes.2021.110357
Characterization of deformation-induced martensite with various AGSs upon Charpy impact loading and correlation with transformation mechanisms
Minghao Huang, Lingyu Wang, Chenchong Wang, Anna Mogucheva and Wei XuMaterials Characterization 184 111704 (2022)
https://doi.org/10.1016/j.matchar.2021.111704
Tensile deformation behavior related with strain-induced martensitic transformation in a duplex Fe-Mn-Al-C low-density steel
Peng Chen, Rong Chen and Xiao-Wu LiMaterials Characterization 189 111954 (2022)
https://doi.org/10.1016/j.matchar.2022.111954
Ultimate Behaviors of Stiffened Panel Built up with TWIP Steel Subjected to Perpendicular Pressure
Kyung Sik KimJournal of Korean Society of Steel Construction 33 (1) 43 (2021)
https://doi.org/10.7781/kjoss.2021.33.1.043
Stacking Fault Driven Phase Transformation in CrCoNi Medium Entropy Alloy
Haiyan He, Muhammad Naeem, Fan Zhang, et al.Nano Letters 21 (3) 1419 (2021)
https://doi.org/10.1021/acs.nanolett.0c04244
Deformation Behavior of Metastable Austenitic Steel at Low and Moderate Temperatures
V. V. Stolyarov, A. V. Frolova, J. V. Tilak Kumar and J. SudhaMetal Science and Heat Treatment 63 (5-6) 334 (2021)
https://doi.org/10.1007/s11041-021-00691-9
Features of TRIP steel deformation at low and moderate temperatures
A V Frolova, V V Stolyarov, J V Tilak Kumar and J SudhaIOP Conference Series: Materials Science and Engineering 1129 (1) 012003 (2021)
https://doi.org/10.1088/1757-899X/1129/1/012003
Microstructural Evolution Study of Fe–Mn–Al–C Steels Through Variable Thermomechanical Treatments
J. F. Durán, G. A. Pérez, J. S. Rodríguez, et al.Metallurgical and Materials Transactions A 52 (11) 4785 (2021)
https://doi.org/10.1007/s11661-021-06424-0
Grain size dependence of twinning behaviors and resultant cryogenic impact toughness in high manganese austenitic steel
Jun Chen, Fu-tao Dong, Zhen-yu Liu and Guo-dong WangJournal of Materials Research and Technology 10 175 (2021)
https://doi.org/10.1016/j.jmrt.2020.12.030
The current state and the prospects for the development of high-plasticity ultrastrong Fe-Mn-Al-C steels
O.P. Verzilov, M.M. Voron, A.Yu. Semenko and V.Zh. ShemetMetal and Casting of Ukraine 29 (2) 101 (2021)
https://doi.org/10.15407/steelcast2021.02.101
Adjustment of Mechanical Properties of Medium Manganese Steel Produced by Laser Powder Bed Fusion with a Subsequent Heat Treatment
Lena Heemann, Farhad Mostaghimi, Bernd Schob, et al.Materials 14 (11) 3081 (2021)
https://doi.org/10.3390/ma14113081
Enhanced Mechanical Properties of Fe-Mn-Al-C Low Density Steel via Aging Treatment
Li Kang, Hao Yuan, Hua-ying Li, et al.Frontiers in Materials 8 (2021)
https://doi.org/10.3389/fmats.2021.680776
Consequences of Deep Rolling at Elevated Temperature on Near-Surface and Fatigue Properties of High-Manganese TWIP Steel X40MnCrAl19-2
Thomas Wegener, Marcel Krochmal, Torben Oevermann and Thomas NiendorfApplied Sciences 11 (21) 10406 (2021)
https://doi.org/10.3390/app112110406
Stacking Fault Energy Determination in Fe-Mn-Al-C Austenitic Steels by X-ray Diffraction
Jaime A. Castañeda, Oscar A. Zambrano, Germán A. Alcázar, Sara A. Rodríguez and John J. CoronadoMetals 11 (11) 1701 (2021)
https://doi.org/10.3390/met11111701
Mechanical Properties of VNS9-Sh TRIP Steel at Various Test Temperatures
V. F. Terent’ev, V. V. Stolyarov, A. V. Frolova and V. P. SirotinkinRussian Metallurgy (Metally) 2020 (4) 416 (2020)
https://doi.org/10.1134/S0036029520040321
Stacking Fault Energy Based Alloy Screening for Hydrogen Compatibility
P. J. Gibbs, P. D. Hough, K. Thürmer, et al.JOM 72 (5) 1982 (2020)
https://doi.org/10.1007/s11837-020-04106-7
Deformation Processes in TRIP/TWIP Steels
Anja WeidnerSpringer Series in Materials Science, Deformation Processes in TRIP/TWIP Steels 295 71 (2020)
https://doi.org/10.1007/978-3-030-37149-4_4
Development of Microstructure and Texture After Cold-Rolling Fe-24Mn-3Al-3Si High-Manganese Steel
Joanna Kowalska and Marcin KowalskiJournal of Materials Engineering and Performance 29 (3) 1495 (2020)
https://doi.org/10.1007/s11665-019-04516-y
Microstructure and Mechanical Properties of a Harmonic Structure Designed Fe-0.3 mass%C Steel
Ryohei Iritani, Kenta Hori, Bhupendra Sharma, et al.Tetsu-to-Hagane 106 (10) 735 (2020)
https://doi.org/10.2355/tetsutohagane.TETSU-2020-007
Design of high-manganese nanostructured austenitic steel with particle swarm optimization
Sushrita Dash and Amlan DuttaMaterials and Manufacturing Processes 35 (6) 635 (2020)
https://doi.org/10.1080/10426914.2019.1686520
Effect of deformation temperature on mechanical properties and microstructure of TWIP steel for expansion tube
Xue Haitao, Wang Dengke and Song KaihongHigh Temperature Materials and Processes 39 (1) 63 (2020)
https://doi.org/10.1515/htmp-2020-0020
The effect of reduced temperatures on microstructure development in tensile tested high-manganese steel
Joanna Kowalska, Janusz Ryś, Grzegorz Cios and Wiktor BednarczykMaterials Science and Engineering: A 767 138406 (2019)
https://doi.org/10.1016/j.msea.2019.138406
A comparison of the internal stresses in a transformation-induced plasticity-assisted steel and a twinning-induced plasticity steel
Javier Gil Sevillano and Fernando de las CuevasMaterials Science and Technology 35 (4) 409 (2019)
https://doi.org/10.1080/02670836.2019.1567044
Physical Metallurgy of High Manganese Steels
Wolfgang Bleck and Christian HaaseMetals 9 (10) 1053 (2019)
https://doi.org/10.3390/met9101053
https://doi.org/10.12794/metadc1538654
Anomalous Twinning as the Macroscopic Deformation Mechanism for AZ31 Magnesium Alloy
Yusuke Onuki and Shigeo SatoKey Engineering Materials 810 95 (2019)
https://doi.org/10.4028/www.scientific.net/KEM.810.95
Research Progress on Strengthening Method of TWIP Steel for Automobile
清稳 李Material Sciences 09 (05) 511 (2019)
https://doi.org/10.12677/MS.2019.95065
The Effect of Heat Treatment and Precipitation on Grain Growth of TRIP Steel
Zhen‐Lei Li, Dong Chen, Jian Kang, Guo Yuan and Guo‐Dong Wangsteel research international 89 (5) (2018)
https://doi.org/10.1002/srin.201700484
A general perspective of Fe–Mn–Al–C steels
O. A. ZambranoJournal of Materials Science 53 (20) 14003 (2018)
https://doi.org/10.1007/s10853-018-2551-6
Modeling the Effect of Primary and Secondary Twinning on Texture Evolution during Severe Plastic Deformation of a Twinning-Induced Plasticity Steel
Laszlo Toth, Christian Haase, Robert Allen, et al.Materials 11 (5) 863 (2018)
https://doi.org/10.3390/ma11050863
Un estudio adicional de la cinética de recristalización y crecimiento de grano del acero twip laminado en frío
Fernando De las Cuevas, Claudio Aguilar and Javier Gil SevillanoRevista de Metalurgia 54 (4) 131 (2018)
https://doi.org/10.3989/revmetalm.131
In-situ neutron diffraction investigation on twinning/detwinning activities during tension-compression load reversal in a twinning induced plasticity steel
Q. Xie, Y. Chen, P. Yang, Z. Zhao, Y.D. Wang and K. AnScripta Materialia 150 168 (2018)
https://doi.org/10.1016/j.scriptamat.2018.03.017
Materials Science and Engineering
G. Anand and P. P. ChattopadhyayMaterials Science and Engineering 72 (2017)
https://doi.org/10.4018/978-1-5225-1798-6.ch004
Twinning-Induced Plasticity (TWIP) Steels
Bruno C. De Cooman, Yuri Estrin and Sung Kyu KimActa Materialia (2017)
https://doi.org/10.1016/j.actamat.2017.06.046
A novel ultrafine-grained Fe 22Mn 0.6C TWIP steel with superior strength and ductility
Y.Z. Tian, Y. Bai, L.J. Zhao, et al.Materials Characterization 126 74 (2017)
https://doi.org/10.1016/j.matchar.2016.12.026
Hot deformation of a Fe-Mn-Al-C steel susceptible of κ-carbide precipitation
O.A. Zambrano, J. Valdés, Y. Aguilar, et al.Materials Science and Engineering: A 689 269 (2017)
https://doi.org/10.1016/j.msea.2017.02.060
Mechanical Properties, Microstructure and Phase Composition of Thin Magnetron Sputtered TWIP Steel Foils
J. Kovac, A. Mehner, B. Köhler, B. Clausen and H.-W. ZochHTM Journal of Heat Treatment and Materials 72 (3) 168 (2017)
https://doi.org/10.3139/105.110326
Effect of Weld Current on the Microstructure and Mechanical Properties of a Resistance Spot-Welded TWIP Steel Sheet
Mumin Tutar, Hakan Aydin and Ali BayramMetals 7 (12) 519 (2017)
https://doi.org/10.3390/met7120519
Recent progress in medium-Mn steels made with new designing strategies, a review
Bin Hu, Haiwen Luo, Feng Yang and Han DongJournal of Materials Science & Technology 33 (12) 1457 (2017)
https://doi.org/10.1016/j.jmst.2017.06.017
On the Prediction of α-Martensite Temperatures in Medium Manganese Steels
Daniel M. Field, Daniel S. Baker and David C. Van AkenMetallurgical and Materials Transactions A 48 (5) 2150 (2017)
https://doi.org/10.1007/s11661-017-4020-2
Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel
Binhan Sun, Nicolas Vanderesse, Fateh Fazeli, et al.Scripta Materialia 133 9 (2017)
https://doi.org/10.1016/j.scriptamat.2017.01.022
Exploiting Process-Related Advantages of Selective Laser Melting for the Production of High-Manganese Steel
Christian Haase, Jan Bültmann, Jan Hof, et al.Materials 10 (1) 56 (2017)
https://doi.org/10.3390/ma10010056
Investigation of the Microstructure Evolution in a Fe-17Mn-1.5Al-0.3C Steel via In Situ Synchrotron X-ray Diffraction during a Tensile Test
Yan Ma, Wenwen Song and Wolfgang BleckMaterials 10 (10) 1129 (2017)
https://doi.org/10.3390/ma10101129
Effect of the Cold Rolling Reduction on the Microstructural Characteristics and Mechanical Behavior of a 0.06%C–17%Mn TRIP/TWIP Steel
Diana Pérez Escobar, Sara Silva Ferreira de Dafé, Kim Verbeken and Dagoberto Brandão Santossteel research international 87 (1) 95 (2016)
https://doi.org/10.1002/srin.201400555
Stacking Fault Energy Maps of Fe–Mn–Al–C–Si Steels: Effect of Temperature, Grain Size, and Variations in Compositions
O. A. ZambranoJournal of Engineering Materials and Technology 138 (4) (2016)
https://doi.org/10.1115/1.4033632
Thermodynamic Driving Force of the γ → ε Transformation and Resulting MS Temperature in High-Mn Steels
S. T. Pisarik and D. C. Van AkenMetallurgical and Materials Transactions A 47 (3) 1009 (2016)
https://doi.org/10.1007/s11661-015-3265-x
On the potential of magnetron sputtering for manufacturing of thin high Mn TWIP steel foils
Julien Kovac, Jeremy Epp, Andreas Mehner, et al.Surface and Coatings Technology 308 136 (2016)
https://doi.org/10.1016/j.surfcoat.2016.07.105
Computational Approaches to Materials Design
G. Anand and P. P. ChattopadhyayAdvances in Chemical and Materials Engineering, Computational Approaches to Materials Design 61 (2016)
https://doi.org/10.4018/978-1-5225-0290-6.ch004
Effect of Ti and B microadditions on the hot ductility behavior of a High-Mn austenitic Fe–23Mn–1.5Al–1.3Si–0.5C TWIP steel
I. Mejía, A.E. Salas-Reyes, J. Calvo and J.M. CabreraMaterials Science and Engineering: A 648 311 (2015)
https://doi.org/10.1016/j.msea.2015.09.079
The influence of stacking fault energy on the microstructural and strain-hardening evolution of Fe–Mn–Al–Si steels during tensile deformation
D.T. Pierce, J.A. Jiménez, J. Bentley, D. Raabe and J.E. WittigActa Materialia 100 178 (2015)
https://doi.org/10.1016/j.actamat.2015.08.030
First-principles study of Mn, Al and C distribution and their effect on stacking fault energies in fcc Fe
N.I. Medvedeva, M.S. Park, D.C. Van Aken and J.E. MedvedevaJournal of Alloys and Compounds 582 475 (2014)
https://doi.org/10.1016/j.jallcom.2013.08.089
Crystallographic Orientation of the ε → α′ Martensitic (Athermal) Transformation in a FeMnAlSi Steel
S. T. Pisarik and D. C. Van AkenMetallurgical and Materials Transactions A 45 (8) 3173 (2014)
https://doi.org/10.1007/s11661-014-2303-4
A fracture-resistant high-entropy alloy for cryogenic applications
Bernd Gludovatz, Anton Hohenwarter, Dhiraj Catoor, Edwin H. Chang, Easo P. George and Robert O. RitchieScience 345 (6201) 1153 (2014)
https://doi.org/10.1126/science.1254581
8732 (2014)
https://doi.org/10.5151/1516-392X-25037
3072 (2014)
https://doi.org/10.5151/1983-4764-25516
Metallographic and fracture characteristics of resistance spot welded TWIP steels
D C Saha, Y Cho and Y-D ParkScience and Technology of Welding and Joining 18 (8) 711 (2013)
https://doi.org/10.1179/1362171813Y.0000000151
Development of 3rd generation AHSS with medium Mn content alloying compositions
Huseyin Aydin, Elhachmi Essadiqi, In-Ho Jung and Stephen YueMaterials Science and Engineering: A 564 501 (2013)
https://doi.org/10.1016/j.msea.2012.11.113
Study of the Combined TWIP/TRIP Effect in a High Mn Steel During Cold Rolling
Kirk Anguah Ofei, Lie Zhao and Jilt Sietsmasteel research international 83 (4) 363 (2012)
https://doi.org/10.1002/srin.201100306
Effects of Al on microstructure and tensile properties of C-bearing high Mn TWIP steel
J.-E. Jin and Y.-K. LeeActa Materialia 60 (4) 1680 (2012)
https://doi.org/10.1016/j.actamat.2011.12.004
Extended Tensile Ductility of a Formable High-Performance High-Manganese Steel
Ludovic Samek, Enno Arenholz and Johannes GentilBHM Berg- und Hüttenmännische Monatshefte 157 (5) 187 (2012)
https://doi.org/10.1007/s00501-012-0076-x
Dynamic mechanical properties of the Fe–30Mn–3Si–4Al TWIP steel after different heat treatments
Zhi-ping Xiong, Xue-ping Ren, Wei-ping Bao, Shu-xia Li and Hai-tao QuMaterials Science and Engineering: A 530 426 (2011)
https://doi.org/10.1016/j.msea.2011.09.106
High-strength Fe–20Mn–Al–C-based Alloys with Low Density
Yuji Sutou, Naohide Kamiya, Reiko Umino, Ikuo Ohnuma and Kiyohito IshidaISIJ International 50 (6) 893 (2010)
https://doi.org/10.2355/isijinternational.50.893
Flow stress analysis of TWIP steel via the XRD measurement of dislocation density
G. Dini, R. Ueji, A. Najafizadeh and S.M. Monir-VaghefiMaterials Science and Engineering: A 527 (10-11) 2759 (2010)
https://doi.org/10.1016/j.msea.2010.01.033
208 (2009)
https://doi.org/10.5151/2594-5297-15576
Derivation and Variation in Composition-Dependent Stacking Fault Energy Maps Based on Subregular Solution Model in High-Manganese Steels
A. Saeed-Akbari, J. Imlau, U. Prahl and W. BleckMetallurgical and Materials Transactions A 40 (13) 3076 (2009)
https://doi.org/10.1007/s11661-009-0050-8
The influence of aluminum on hot deformation behavior and tensile properties of high-Mn TWIP steels
A.S. Hamada, L.P. Karjalainen and M.C. SomaniMaterials Science and Engineering: A 467 (1-2) 114 (2007)
https://doi.org/10.1016/j.msea.2007.02.074
Microstructural Evolution and Crystallographic Texture Formation of Cold Rolled Austenitic Fe‐30Mn‐3Al‐3Si TWIP‐Steel
Steven Vercammen, Bruno C. De Cooman, Nuri Akdut, Bart Blanpain and Patrick Wollantssteel research international 74 (6) 370 (2003)
https://doi.org/10.1002/srin.200300200
Fundamental Issues and Applications of Shock-Wave and High-Strain-Rate Phenomena
L.W. Meyer, L. Krüger, O. Grässel and G. FrommeyerFundamental Issues and Applications of Shock-Wave and High-Strain-Rate Phenomena 107 (2001)
https://doi.org/10.1016/B978-008043896-2/50106-6