Materials selection in mechanical design
J. Phys. IV France, 03 C7 (1993) C7-1-C7-9
Articles citing this article
The Citing articles tool gives a list of articles citing the current article.
The citing articles come from EDP Sciences database, as well as other publishers participating in CrossRef Cited-by Linking Program. You can set up your personal account to receive an email alert each time this article is cited by a new article (see the menu on the right-hand side of the abstract page).
Cited article:
This article has been cited by the following article(s):
Ceramic reaction-sintered material diamond ‒ silicon carbide for use in special-purpose products
A. N. Belyakov, M. A. Markov, A. D. Kashtanov, A. D. Bykova, A. G. Chekuryaev, D. A. Dyuskina and A. N. NikolaevNOVYE OGNEUPORY (NEW REFRACTORIES) (4) 20 (2026)
https://doi.org/10.17073/1683-4518-2025-4-20-26
A Qualitative Correlation Between Microstructure and Tribological Responses of Ni-Based Alloys Under Complex Working Conditions
Mohammed Seyf Eddine Bougoffa, Mamoun Fellah, Mohamed Nabil Bachirbey, Sayhia Benchaa, Chahrazed Benouali, Hind Saidani Scott, Ahlem Guesmi and Lotfi KhezamiJOM 78 (1) 1005 (2026)
https://doi.org/10.1007/s11837-025-07909-8
A Dual‐Frequency Sensitivity Model for Optical Fibre Ultrasonic Sensors in Power Transformer Partial Discharge Detection
Sihan Wang, Jihang Sun, Jialin Wang, Bin Wei and Guoming MaHigh Voltage (2026)
https://doi.org/10.1049/hve2.70124
Reevaluating brittleness in material selection: why fracture toughness alone is insufficient
Michelle Hedvard, Maja Eichler and Philipp WeißgraeberMaterials & Design 114109 (2025)
https://doi.org/10.1016/j.matdes.2025.114109
Graph‐Theory Approach to Element Miscibility and Alloy Design
Andrew Martin, Kien Nguyen, Sebastian Zaatini, Michael Lastovich, Bharat Gwalani, Paul Bogdan and Martin M. ThuoAdvanced Science (2025)
https://doi.org/10.1002/advs.202521018
Online prediction of composite material drilling quality based on multi-sensor fusion
Wei Liu, ·Jiacheng Cui, Yongkang Lu, Pengbo Yin, Lei Han, Yingxin Jiang and Yang ZhangJournal of Intelligent Manufacturing 36 (8) 5889 (2025)
https://doi.org/10.1007/s10845-024-02503-2
Thermal expansion of boron nitride nanotubes and additively manufactured ceramic nanocomposites
Dingli Wang, Rachel Chen, Nasim Anjum and Changhong KeNanotechnology 36 (6) 065703 (2025)
https://doi.org/10.1088/1361-6528/ad933a
Experimental study on parameter identification and isolator characteristics of viscoelastic damping material
Hsien-Hsiu Hung, Yu-Hsi Huang and Chien-Ching MaInternational Journal of Mechanics and Materials in Design 21 (6) 1357 (2025)
https://doi.org/10.1007/s10999-025-09786-0
97 (2025)
https://doi.org/10.1109/3M-NANO65639.2025.11261100
Effect of Process Parameters and Geometry on the Quasi-Static and Dynamic Behavior of Additively Manufactured Lower-Extremity Metallic Lattice Bone Implants: A Design-of-Experiment Study
Siamak Ghadami-Badrlou, Mohsen Khajehzadeh and Mohammad Reza Razfar3D Printing and Additive Manufacturing (2025)
https://doi.org/10.1089/3dp.2024.0190
Study on Mechanical Properties and Energy Absorption of PA12 Topological Lattice Structures Prepared by Selective Laser Sintering
B. Hao, Z. J. Yan, G. N. Li and Y. HanMechanics of Solids 60 (4) 3271 (2025)
https://doi.org/10.1134/S0025654425601946
Similitude laws for the vibroacoustic response of fluid-loaded plates under a turbulent boundary layer excitation
Xavier Plouseau-Guédé, Alain Berry, Laurent Maxit and Valentin MeyerThe Journal of the Acoustical Society of America 157 (1) 595 (2025)
https://doi.org/10.1121/10.0034868
Generalizable Metamaterials Design Techniques Inspire Efficient Mycelial Materials Inverse Design
Joseph Zavorskas, Harley Edwards, Mark R. Marten, Steven Harris and Ranjan SrivastavaACS Biomaterials Science & Engineering 11 (4) 1897 (2025)
https://doi.org/10.1021/acsbiomaterials.4c01986
1 (2025)
https://doi.org/10.1109/ICM66518.2025.11321326
1 (2025)
https://doi.org/10.4018/979-8-3693-6341-6.ch001
Failure assessment of the engineered composite stiffened plates with geometric variations under high velocity impact by nonlinear finite element approach
Wardiman Devany Rizky, Aditya Rio Prabowo, Jung Min Sohn, Tuswan Tuswan, Rahimuddin Rahimuddin, Teguh Muttaqie and Bambang KusharjantaJournal of Umm Al-Qura University for Engineering and Architecture 16 (4) 1590 (2025)
https://doi.org/10.1007/s43995-025-00197-y
71 (2025)
https://doi.org/10.1007/978-3-031-85829-1_11
Effect of reinforcements mechanical properties on the performance of anisotropic colloidal crystal composites
Shitong Zhou, Ao Li, Victoria Vilchez, Oriol Gavalda‐Diaz and Florian BouvilleJournal of the American Ceramic Society 108 (11) (2025)
https://doi.org/10.1111/jace.70074
Effects of silanized nano-Al2O3 fillers on the mechanical properties and printing accuracy of photopolymer resins for 3D printing dental applications
Shiyu Ji, Jingyi Ren, Jing Zhang, Wenjuan Zhou and Zhonghao LiuMaterials Research Express 12 (8) 085401 (2025)
https://doi.org/10.1088/2053-1591/adf709
Splitting the difference: Genetically-tunable mycelial films using natural genetic variations in schizophyllum commune
Viraj Whabi and Jianping XuJournal of Bioresources and Bioproducts 10 (3) 336 (2025)
https://doi.org/10.1016/j.jobab.2025.05.004
Material Selection for the Development of Orthoses Using Multicriteria Methods (MCDMs) and Simulation
Rodger Benjamin Salazar Loor, Javier Martínez-Gómez and Josencka Sarmiento AnchundiaProcesses 13 (6) 1796 (2025)
https://doi.org/10.3390/pr13061796
Process Development Methods in Microtechnology and the Associated Process Environment
Korbinian T. Metz, Faruk Civelek and André ZimmermannMicromachines 16 (6) 606 (2025)
https://doi.org/10.3390/mi16060606
Material Selection for Gear Manufacture in Terms of the Probabilistic Multi-objective Optimization
Maosheng Zheng and Jie YuResearch on Intelligent Manufacturing and Assembly 4 (1) 180 (2025)
https://doi.org/10.25082/RIMA.2025.01.004
Methodology for BESS Design Assisted by Choice Matrix Approach
Rodrigo Cassio De Barros, William Caires Silva Amorim, Wallace do Couto Boaventura, Allan Fagner Cupertino, Victor Flores Mendes and Heverton Augusto PereiraEletrônica de Potência 29 e202412 (2024)
https://doi.org/10.18618/REP.2005.1.019027
Engineered colossal linear thermal expansion in nanocrystalline NiTi micropillars by stress
Kangjie Chu, Qiao Li, Qingping Sun and Fuzeng RenActa Materialia 262 119442 (2024)
https://doi.org/10.1016/j.actamat.2023.119442
Alkyl ketene dimer modification of thermomechanical pulp promotes processability with polypropylene
Seyedehsan Hosseini, Robin Nilsson, Anna Ström, Anette Larsson and Gunnar WestmanPolymer Composites 45 (1) 825 (2024)
https://doi.org/10.1002/pc.27818
Wood and plywood as eco-materials for sustainable mobility: A review
B. Castanié, A. Peignon, C. Marc, F. Eyma, A. Cantarel, J. Serra, R. Curti, H. Hadiji, L. Denaud, S. Girardon and B. MarconComposite Structures 329 117790 (2024)
https://doi.org/10.1016/j.compstruct.2023.117790
A model‐based failure times identification for a system governed by a 2D parabolic partial differential equation
Mohamed Salim Bidou, Laetitia Perez, Sylvain Verron and Laurent AutriqueIET Control Theory & Applications 18 (9) 1163 (2024)
https://doi.org/10.1049/cth2.12652
Microstructure and deformation behavior of novel metal–ceramic laminated composites Ta/Ti3Al(Si)C2–TiC
A. V. Abdulmenova, E. B. Kashkarov, D. G. Krotkevich and N. TravitzkyPoverhnostʹ. Rentgenovskie, sinhrotronnye i nejtronnye issledovaniâ (9) 106 (2024)
https://doi.org/10.31857/S1028096024090148
Microstructure and Deformation Behavior of Novel Metal–Ceramic Laminated Composites Ta/Ti3Al(Si)C2–TiC
A. V. Abdulmenova, E. B. Kashkarov, D. G. Krotkevich and N. TravitzkyJournal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques 18 (5) 1105 (2024)
https://doi.org/10.1134/S1027451024700897
Influence of wood modification on parameter settings and treatment results in CO2 laser structuring of beech veneers
Güneş Akın Doğan, Richard Wascher, Georg Avramidis, Wolfgang Viöl and Christoph GerhardJournal of Materials Science: Materials in Engineering 19 (1) (2024)
https://doi.org/10.1186/s40712-024-00192-6
Coarsening mechanism of M2B-borides and their effect on the mechanical properties of high modulus steels
M. Gathmann, D. Moisi and H. SpringerMaterials & Design 247 113411 (2024)
https://doi.org/10.1016/j.matdes.2024.113411
Review of criteria and methods for evaluating properties of ceramic materials designed for impact load protection
V. Ya. Shevchenko, A. S. Dolgin, M. M. Sychev and S. V. BalabanovVoprosy Materialovedeniya (1(117)) 127 (2024)
https://doi.org/10.22349/1994-6716-2024-117-1-127-142
Surface hardening of high modulus steels through carburizing and nitriding: First insights into microstructure property relationships
M. Gathmann, N. Tönnißen, C. Baron, A. Kostka, M. Steinbacher and H. SpringerSurface and Coatings Technology 494 131354 (2024)
https://doi.org/10.1016/j.surfcoat.2024.131354
Nanoporous amorphous carbon nanopillars with lightweight, ultrahigh strength, large fracture strain, and high damping capability
Zhongyuan Li, Ayush Bhardwaj, Jinlong He, Wenxin Zhang, Thomas T. Tran, Ying Li, Andrew McClung, Sravya Nuguri, James J. Watkins and Seok-Woo LeeNature Communications 15 (1) (2024)
https://doi.org/10.1038/s41467-024-52359-6
Stress-Induced Martensitic Transformation in Na3YCl6
Akira Miura, Koki Muraoka, Kotaro Maki, Saori Kawaguchi, Kazuhiro Hikima, Hiroyuki Muto, Atsunori Matsuda, Ichiro Yamane, Toshihiro Shimada, Hiroaki Ito, Yoshikazu Mizuguchi, Chikako Moriyoshi, Hiroshi Nakajima, Shigeo Mori, Hiroshi Oike, Akira Nakayama, Wenhao Sun, Nataly Carolina Rosero-Navarro and Kiyoharu TadanagaJournal of the American Chemical Society 146 (36) 25263 (2024)
https://doi.org/10.1021/jacs.4c09476
Assessment of voltage detection-based Selective Harmonic Current Compensation Strategies for Different Non-linear Load Signatures
João Marcus Soares Callegari, Rodrigo Rodrigues Bastos, Allan Fagner Cupertino, Danilo Iglesias Brandao and Heverton Augusto PereiraEletrônica de Potência 29 e202425 (2024)
https://doi.org/10.18618/REP.2005.2.053060
Reducing friction between metal and thermo-mechanical pulp using alkyl ketene dimers and magnesium stearate
Seyedehsan Hosseini, Roujin Ghaffari, Anette Larsson, Gunnar Westman and Anna StrömTribology International 109280 (2024)
https://doi.org/10.1016/j.triboint.2024.109280
On the data-driven description of lattice materials mechanics
Ismael Ben-Yelun, Luis Irastorza-Valera, Luis Saucedo-Mora, Francisco Javier Montáns and Francisco ChinestaResults in Engineering 102235 (2024)
https://doi.org/10.1016/j.rineng.2024.102235
The wettability of metallic glasses: a review
Yu-yao Guo, Jun-jie Xu, Li-na Zhu, Jia-jie Kang, Yong-kuan Zhou, Zhi-qiang Fu and Ding-shun SheSurface Science and Technology 2 (1) (2024)
https://doi.org/10.1007/s44251-024-00035-8
Screening Life Cycle Assessment comparing One-step and Two-step Injection Molding Compounding using Conservative and Optimistic Scenarios
Ulrike Kirschnick, Zahra Shahroodi, Nina Krempl and Ralf SchledjewskiWSEAS TRANSACTIONS ON ENVIRONMENT AND DEVELOPMENT 19 1293 (2023)
https://doi.org/10.37394/232015.2023.19.117
Inferring Effective Interphase Properties in Composites by Inverse Analysis
J. Caleb Arp, John Nicholson, Joseph Geddes, D. Andrew Brown, Sez Atamturktur Russcher and Christopher L. KitchensACS Applied Polymer Materials 5 (10) 7733 (2023)
https://doi.org/10.1021/acsapm.3c00891
Investigation of Solid-State Batteries for Safer and More Efficient Energy Storage
Jordan Y. ArpilledaInternational Journal of Advanced Research in Science, Communication and Technology 620 (2023)
https://doi.org/10.48175/IJARSCT-11300
Shock compression of reactive Al/Ni multilayers—Phase transformations and mechanical properties
Fabian Schwarz and Ralph SpolenakJournal of Applied Physics 133 (22) (2023)
https://doi.org/10.1063/5.0147880
Bioinspired fracture toughness enhancement of a fully bio-based epoxy resin
Markus Schwaiger, Christoph Waly, Michael Huszar, Gernot Oreski, Michael Feuchter, Florian Arbeiter and Katharina Resch-FausterPolymer Testing 124 108098 (2023)
https://doi.org/10.1016/j.polymertesting.2023.108098
Fourier-transform rheology and printability maps of complex fluids for three-dimensional printing
Esther García-Tuñón, Rishav Agrawal, Bin Ling and David J. C. DennisPhysics of Fluids 35 (1) (2023)
https://doi.org/10.1063/5.0128658
Elastic metamaterials for guided waves: from fundamentals to applications
Jeseung Lee and Yoon Young KimSmart Materials and Structures 32 (12) 123001 (2023)
https://doi.org/10.1088/1361-665X/ad0393
Optimum alternate material selection methodology for an aircraft skin
Fareed AHMAD, Mohammed Al AWADH and Sahar NOORChinese Journal of Aeronautics 36 (7) 476 (2023)
https://doi.org/10.1016/j.cja.2023.05.019
Design of Parallel Variable Stiffness Actuators
Chase W. Mathews and David J. BraunIEEE Transactions on Robotics 39 (1) 768 (2023)
https://doi.org/10.1109/TRO.2022.3197088
Concepts towards bio-inspired multilayered polymer-composites
Johannes Wiener, Florian Arbeiter and Gerald PinterProcedia Structural Integrity 47 253 (2023)
https://doi.org/10.1016/j.prostr.2023.07.018
Design of a syringe extension device (Chloe SED®) for low-resource settings in sub-Saharan Africa: a circular economy approach
Karlheinz Tondo Samenjo, Aparna Ramanathan, Stephen Otieno Gwer, Robert C. Bailey, Fredrick Odhiambo Otieno, Erin Koksal, Benjamin Sprecher, Rebecca Anne Price, Conny Bakker and Jan Carel DiehlFrontiers in Medical Technology 5 (2023)
https://doi.org/10.3389/fmedt.2023.1183179
Determination of the Mechanical Characteristics of the Ideal Ceramic (Diamond–Silicon Carbide Composite
A. N. Belyakov, S. N. Perevislov, V. Ya. Shevchenko and A. S. OryshchenkoФизика и химия стекла 49 (6) 573 (2023)
https://doi.org/10.31857/S0132665123600401
Enhancing the Properties of Yttria-Stabilized Zirconia Composites with Zeolitic Imidazolate Framework-Derived Nanocarbons
Niyaz Cakan, Abduselam Abubeker Issa, Hamza Alsalman, Emin Aliyev, Enes Ibrahim Duden, Kubra Gurcan Bayrak, Mujdat Caglar, Servet Turan, Mustafa Erkartal and Unal SenACS Applied Materials & Interfaces 15 (50) 58931 (2023)
https://doi.org/10.1021/acsami.3c15359
Xylan Plastic
Siyu Jia, Ziwen Lv, Jun Rao, Baozhong Lü, Gegu Chen, Jing Bian, Mingfei Li and Feng PengACS Nano 17 (14) 13627 (2023)
https://doi.org/10.1021/acsnano.3c02327
Case study of low-alloy steel material selection for the bodies of subsea valves: failure prevention approaches
Karan SotoodehProgress in Additive Manufacturing 8 (2) 77 (2023)
https://doi.org/10.1007/s40964-022-00313-7
Material Selection Process for Acoustic and Vibration Applications Using the Example of a Plate Resonator
Moritz Neubauer, Felix Schwaericke, Vincent Radmann, Ennes Sarradj, Niels Modler and Martin DannemannMaterials 15 (8) 2935 (2022)
https://doi.org/10.3390/ma15082935
Optimized design of straight bevel gear tooth root transition surface
Haohan Zeng, Liangmo Wang, Huiming Sun, Tao Wang and Qiang GaoStructural and Multidisciplinary Optimization 65 (1) (2022)
https://doi.org/10.1007/s00158-021-03146-0
Impact of spherulite-type crystalline defects on the mechanical and electrochemical properties of TiCuZrPd metallic glasses
Laurabelle Gautier, Aléthea Liens, Benoit Ter-Ovanessian, Sabrina Marcelin, Thierry Douillard, Hervé Richard, Nicolas Courtois, Jérôme Chevalier and Damien FabrègueMaterialia 101353 (2022)
https://doi.org/10.1016/j.mtla.2022.101353
Elastic properties, fracture toughness, ideal tensile strength and thermal conductivities of the stable hexagonal WB2, W2B5, WB3 and WB4
Ancang Yang, Yonghua Duan, Mingjun Peng, Li Shen and Huarong QiApplied Physics A 128 (2) (2022)
https://doi.org/10.1007/s00339-022-05299-1
A Review on the Mechanical Behaviour of Bamboo Reinforced Concrete Beams
Usama Sayed, Assima Dauletbek, Xue Xin, Rodolfo Lorenzo and Haitao LiJournal of Renewable Materials 10 (12) 3629 (2022)
https://doi.org/10.32604/jrm.2022.022624
Open-Source Library of Tissue Engineering Scaffolds
Adrián Martínez Cendrero, Francisco Franco Martínez, William Solórzano Requejo and Andres Diaz LantadaSSRN Electronic Journal (2022)
https://doi.org/10.2139/ssrn.4166571
Performance Evaluation of Sandwich Structures Printed by Vat Photopolymerization
Shukantu Dev Nath and Sabrina NilufarPolymers 14 (8) 1513 (2022)
https://doi.org/10.3390/polym14081513
Bionic Design Method of a Non-Uniform Lattice Structure for a Landing Footpad
Haoyu Deng, Junpeng Zhao and Chunjie WangAerospace 9 (4) 220 (2022)
https://doi.org/10.3390/aerospace9040220
99 315 (2022)
https://doi.org/10.1007/978-981-19-3092-8_16
A novel decision-making methodology for materials selection under uncertainty: modified fuzzy logic method
Mostafa Sharifan, Ali Abedian and Pardis RazaghianSoft Computing 26 (22) 12093 (2022)
https://doi.org/10.1007/s00500-022-07444-7
Mitigation and Mechanism of Tin Whisker on Micro-bumps by Hard and Soft Underfills
Zhenzhen Shan, Ke Lin, Anmin Hu and Ming LiElectronic Materials Letters 18 (6) 547 (2022)
https://doi.org/10.1007/s13391-022-00372-6
Composite strut-plate lattice: A high-stiffness design of cellular metamaterial having excellent strength and energy absorption ability
Manash Jyoti Baishya, Bikram Jyoti Sahariah, Nelson Muthu and Prasenjit KhanikarMaterials Today Communications 33 104939 (2022)
https://doi.org/10.1016/j.mtcomm.2022.104939
1 (2022)
https://doi.org/10.1109/MMA55579.2022.9993338
Additive manufacturing of biomaterials for bone tissue engineering – A critical review of the state of the art and new concepts
Marie-Michèle Germaini, Sofiane Belhabib, Sofiane Guessasma, Rémi Deterre, Pierre Corre and Pierre WeissProgress in Materials Science 130 100963 (2022)
https://doi.org/10.1016/j.pmatsci.2022.100963
Open-source library of tissue engineering scaffolds
Adrián Martínez Cendrero, Francisco Franco Martínez, William Gabriel Solórzano Requejo and Andrés Díaz LantadaMaterials & Design 223 111154 (2022)
https://doi.org/10.1016/j.matdes.2022.111154
Design of smart nanomedicines for effective cancer treatment
Niloofar Heshmati Aghda, Maedeh Dabbaghianamiri, James W. Tunnell and Tania BetancourtInternational Journal of Pharmaceutics 621 121791 (2022)
https://doi.org/10.1016/j.ijpharm.2022.121791
Large tunable thermal expansion in ferroelastic alloys by stress
Qiao LI, Yusuke ONUKI, Aslan AHADI and Qingping SUNActa Materialia 240 118350 (2022)
https://doi.org/10.1016/j.actamat.2022.118350
Pseudoelasticity of SrNi2P2 Micropillar via Double Lattice Collapse and Expansion
Shuyang Xiao, Vladislav Borisov, Guilherme Gorgen-Lesseux, Sarshad Rommel, Gyuho Song, Jessica M. Maita, Mark Aindow, Roser Valentí, Paul C. Canfield and Seok-Woo LeeNano Letters 21 (19) 7913 (2021)
https://doi.org/10.1021/acs.nanolett.1c01750
Experimental and Numerical Study on a Non-Explosive Reactive Armour with the Rubber Interlayer Applied against Kinetic-Energy Penetrators—The ‘Bulging Effect’ Analysis
Teresa FrasMaterials 14 (12) 3334 (2021)
https://doi.org/10.3390/ma14123334
Newly Synthesized Three-Dimensional Boron-Rich Chalcogenides B12X (X = S and Se): Theoretical Characterization of the Physical Properties for Optoelectronic and Mechanical Applications
Md. Mukter Hossain, Md. Ashraf Ali, Md. Mohi Uddin, Saleh Hasan Naqib and A. K. M. Azharul IslamACS Omega 6 (49) 33899 (2021)
https://doi.org/10.1021/acsomega.1c05172
Using of metakaolin to produce colored geopolymer concrete
M Mohammed Hameed and A Mohammed AliJournal of Physics: Conference Series 2114 (1) 012018 (2021)
https://doi.org/10.1088/1742-6596/2114/1/012018
1 (2021)
https://doi.org/10.1109/WEEF/GEDC53299.2021.9657227
Hollow-walled lattice materials by additive manufacturing: Design, manufacture, properties, applications and challenges
J. Noronha, M. Qian, M. Leary, E. Kyriakou and M. BrandtCurrent Opinion in Solid State and Materials Science 25 (5) 100940 (2021)
https://doi.org/10.1016/j.cossms.2021.100940
Universal Relation for Effective Interaction between Polymer-Grafted Nanoparticles
Nitin K. Hansoge, Agam Gupta, Heather White, Andrea Giuntoli and Sinan KetenMacromolecules 54 (7) 3052 (2021)
https://doi.org/10.1021/acs.macromol.0c02600
Bending Response of 3D-Printed Titanium Alloy Sandwich Panels with Corrugated Channel Cores
Zhenyu Zhao, Jianwei Ren, Shaofeng Du, et al.Materials 14 (3) 556 (2021)
https://doi.org/10.3390/ma14030556
Origin of high hardness and optoelectronic and thermo-physical properties of boron-rich compounds B6X (X = S, Se): A comprehensive study via DFT approach
M. M. Hossain, M. A. Ali, M. M. Uddin, A. K. M. A. Islam and S. H. NaqibJournal of Applied Physics 129 (17) (2021)
https://doi.org/10.1063/5.0047139
An enhanced flexoelectric dielectric elastomer actuator with stretchable electret
Shuwen Zhang, Shubao Shao, Xuxu Yang, Peijian Chen, Hui Ji, Kaiyuan Liu, Tonghui Wu, Shengping Shen and Minglong XuSmart Materials and Structures 30 (12) 125004 (2021)
https://doi.org/10.1088/1361-665X/ac2de1
The thermodynamic stability and mechanical properties of TiC x N1−x (0 ⩽ x ⩽ 1) compounds by cluster expansion method and first-principles calculations
Yijie Chen, Canhui Xu, Shuanglin Hu, Xiaojun Zhao, Lairong Xiao and Zhenyang CaiJournal of Physics: Condensed Matter 33 (15) 155701 (2021)
https://doi.org/10.1088/1361-648X/abdf93
Structural Batteries: A Review
Federico Danzi, Rui Martim Salgado, Joana Espain Oliveira, et al.Molecules 26 (8) 2203 (2021)
https://doi.org/10.3390/molecules26082203
Analysis of thermoelastic damping in trilayered composite microplates based on three-dimensional heat conduction
Jinchi Xu, Xiaopeng Li, Renzhen Chen, Linlin Wang, Zemin Yang and Hexu YangJournal of the Brazilian Society of Mechanical Sciences and Engineering 43 (10) (2021)
https://doi.org/10.1007/s40430-021-03182-3
Materials Selection Approaches and Fabrication Methods in RF MEMS Switches
Kurmendra and Rajesh KumarJournal of Electronic Materials 50 (6) 3149 (2021)
https://doi.org/10.1007/s11664-021-08817-8
Leaf Vein-Inspired Bionic Design Method for Heat Exchanger Infilled with Graded Lattice Structure
Haoyu Deng, Junpeng Zhao and Chunjie WangAerospace 8 (9) 237 (2021)
https://doi.org/10.3390/aerospace8090237
Expanding Materials Selection Via Transfer Learning for High-Temperature Oxide Selection
Zachary D. McClure and Alejandro StrachanJOM 73 (1) 103 (2021)
https://doi.org/10.1007/s11837-020-04411-1
A novel method for predicting delamination of carbon fiber reinforced plastic (CFRP) based on multi-sensor data
Jiacheng Cui, Wei Liu, Yang Zhang, Changyong Gao, Zhe Lu, Ming Li and Fuji WangMechanical Systems and Signal Processing 157 107708 (2021)
https://doi.org/10.1016/j.ymssp.2021.107708
Long-Term Strength Development of Fly Ash-Based One-Part Alkali-Activated Binders
Sani Haruna, Bashar S. Mohammed, Mohamed Mubarak A. Wahab, Mubarak Usman Kankia, Mugahed Amran and Abdurra’uf Mukhtar GoraMaterials 14 (15) 4160 (2021)
https://doi.org/10.3390/ma14154160
A Critical Assessment of the Processing Parameters Yielding an Optimum Combination of Mechanical Properties in Cast Al-B4C Composites
Pooja Maurya, Lakshmi Vaishnavi, Indrani Sen and Siddhartha RoyTransactions of the Indian Institute of Metals 74 (6) 1279 (2021)
https://doi.org/10.1007/s12666-021-02220-x
Machine Learning Based Methods for Obtaining Correlations between Microstructures and Thermal Stresses
Akshay Bhutada, Sunni Kumar, Dayalan Gunasegaram and Alankar AlankarMetals 11 (8) 1167 (2021)
https://doi.org/10.3390/met11081167
Kinetic and Microhydrodynamic Modeling of Fenofibrate Nanosuspension Production in a Wet Stirred Media Mill
Gulenay Guner, Dogacan Yilmaz and Ecevit BilgiliPharmaceutics 13 (7) 1055 (2021)
https://doi.org/10.3390/pharmaceutics13071055
Optimization of Mechanical Properties and Damage Tolerance in Polymer-Mineral Multilayer Composites
Johannes Wiener, Hannes Kaineder, Otmar Kolednik and Florian ArbeiterMaterials 14 (4) 725 (2021)
https://doi.org/10.3390/ma14040725
Conformal Wireframe Nets for Trimmed Symmetric Unit Cells in Functionally Graded Lattice Materials
Eric Trudel and Mostafa S. A. ElSayedApplied Mechanics 2 (1) 81 (2021)
https://doi.org/10.3390/applmech2010006
Design of a Lightweight Multifunctional Composite Railway Axle Utilising Coaxial Skins
Preetum J. Mistry, Michael S. Johnson, Charles A. McRobie and Ivor A. JonesJournal of Composites Science 5 (3) 77 (2021)
https://doi.org/10.3390/jcs5030077
A Rule-Based System to Promote Design for Manufacturing and Assembly in the Development of Welded Structure: Method and Tool Proposition
Claudio Favi, Roberto Garziera and Federico CampiApplied Sciences 11 (5) 2326 (2021)
https://doi.org/10.3390/app11052326
A Systematic Approach for Evaluating the Adoption of Additive Manufacturing in the Product Design Process
Roberto Raffaeli, Jacopo Lettori, Juliana Schmidt, Margherita Peruzzini and Marcello PellicciariApplied Sciences 11 (3) 1210 (2021)
https://doi.org/10.3390/app11031210
Uncoiling springs promote mechanical functionality of spider cribellate silk
Dakota Piorkowski, Todd A. Blackledge, Chen-Pan Liao, et al.Journal of Experimental Biology 223 (5) jeb215269 (2020)
https://doi.org/10.1242/jeb.215269
Mesoscale informed parameter estimation through machine learning: A case-study in fracture modeling
Nishant Panda, Dave Osthus, Gowri Srinivasan, et al.Journal of Computational Physics 109719 (2020)
https://doi.org/10.1016/j.jcp.2020.109719