Journal de Physique IV

H. Bel Hadj Salah, A. Khalfallah, A. Znaidi, A. Dogui et F. Sidoroff

DOI: https://doi.org/10.1051/jp4:20030165

Identification of anisotropic Hill criteria from the channel die compression test. Application to a normal anisotropy of zirconium 702α p. 11

A. Gavrus et H. Francillette

DOI: https://doi.org/10.1051/jp4:20030166

Anisotropy in thin Canning sheet metals p. 19

D.W.A. Rees

DOI: https://doi.org/10.1051/jp4:20030167

On the use of evolving structure tensors to model initial and induced elastic and inelastic anisotropy at finite deformation p. 31

S. Reese et B. Svendsen

DOI: https://doi.org/10.1051/jp4:20030168

Convex fourth and sixth-order plastic potentials derived from crystallographic texture p. 39

A. Van Bael et P. Van Houtte

DOI: https://doi.org/10.1051/jp4:20030169

Anisotropic yield function of sheet forming simulation for aluminum alloy by using commercial FEM software “LS-DYNA V950" p. 47

K. Yamada, H. Mizukoshi, K. Okada, N. Ma et N. Sugitomo

DOI: https://doi.org/10.1051/jp4:20030170

A non-classical micro-macro transition towards the anisotropic damage behaviour of particulate composites p. 55

C. Nadot-Martin, N. Lesur, D. Halm, H. Trumel et A. Dragon

DOI: https://doi.org/10.1051/jp4:20030171

The effects of plastic anisotropy and latent hardening in 3D FCC single crystals on the formation of shear band p. 63

J. Nitta, K. Ito, S. Kanno et T. Sagawa

DOI: https://doi.org/10.1051/jp4:20030172

Study on forming limit diagrams prediction using a phenomenological and a physical approach of plasticity theory p. 73

M.C. Butuc, A. Barata da Rocha, J.J. Gracier et J. Ferreira Duarte

DOI: https://doi.org/10.1051/jp4:20030173

Multiscale modelling of anisotropic damage of discontinuous reinforced metal matrix composites p. 81

D. Baptiste, K. Derrien et E. Lepen

DOI: https://doi.org/10.1051/jp4:20030174

Wrinkling of anisotropic sheet metals under deep drawing p. 89

J.P. de Magalhaes Correia et G. Ferron

DOI: https://doi.org/10.1051/jp4:20030175

Stress concentrations in non-convex second phase particles embedded in metal matrix submitted to large plastic deformations p. 99

A. Baldacci, H. Klöcker et J.H. Driver

DOI: https://doi.org/10.1051/jp4:20030176

The modified affine homogenisation scheme for nonlinear composites: Comparison with variational bounds and estimates p. 107

R. Brenner, O. Castelnau et P. Gilormini

DOI: https://doi.org/10.1051/jp4:20030177

The local composite architecture of MMCs-Effects on the local deformation and fracture behavior p. 115

K. Unterweger, Th. Dick, R. Pippan et O. Kolednik

DOI: https://doi.org/10.1051/jp4:20030178

Simulation by periodic homogenization of the behavior of a polycrystalline material in large elastoplastic transformations p. 123

S. Elbououni, S. Bourgeois, O. Débordes et A. Dogui

DOI: https://doi.org/10.1051/jp4:20030179

Modelling at the dislocation level the reinforcement of alloys by hard precipitates: The example of Ni-base superalloys p. 131

B. Fedelich

DOI: https://doi.org/10.1051/jp4:20030180

Micromechanical modeling of plastic anisotropy and strain induced phase transformation in dual-elastoplastic phase materials p. 139

F. Lani, Q. Furnémont, P.J. Jacques, F. Delannay et T. Pardoen

DOI: https://doi.org/10.1051/jp4:20030181

Anisotropic damage effects in masonry walls p. 149

T. Massart, P. Bouillard, M.G.D. Geers et R.H.J. Peerlings

DOI: https://doi.org/10.1051/jp4:20030182

Multiscale modelling of hardening in BCC crystal plasticity p. 157

L. Stainier, A.M. Cuitino et M. Ortiz

DOI: https://doi.org/10.1051/jp4:20030183

Crystallographic texture induced anisotropy in copper: An approach based on a tensorial Fourier expansion of the CODF p. 167

T. Böhlke et A. Bertram

DOI: https://doi.org/10.1051/jp4:20030184

Prediction of residual stresses and springback after bending of a textured aluminium plate p. 175

L. Delannay, R.E. Logé, Y. Chastel et P. Van Houtte

DOI: https://doi.org/10.1051/jp4:20030185

Finite element simulation and experimental validation of the local texture of an IF steel aggregate submitted to channel die compression p. 183

P. Erieau et C. Rey

DOI: https://doi.org/10.1051/jp4:20030186

Simulation of the Portevin-Le Chatelier effect using polycrystal plasticity p. 191

S. Kok, A.J. Beaudoin, D.A. Tortorelli, M. Lebyodkin, L. Kubin et C. Fressengeas

DOI: https://doi.org/10.1051/jp4:20030187

Description of anisotropy of textured metals using macro and micro models p. 199

K. Kowalczyk et Z. Mroz

DOI: https://doi.org/10.1051/jp4:20030188

Contribution of deformation-induced intragranular microstructure to the plastic anisotropy of metals p. 207

P. Van Houtte et B. Peeters

DOI: https://doi.org/10.1051/jp4:20030189

Anisotropic work-hardening behaviour of structural steels and aluminium alloys at large strains p. 215

S. Bouvier, C. Teodosiu, H. Haddadi et V. Tabacaru

DOI: https://doi.org/10.1051/jp4:20030190

Micro-macro analysis of steel sheet behaviour in finite element simulations. Application to deep-drawing process p. 223

L. Duchêne, A. Godinas, S. Cescotto et A.M. Habraken

DOI: https://doi.org/10.1051/jp4:20030191

New self-consistent approach for inelastic materials based on translated fields p. 231

V. Favier, H. Sabar, M. Berveiller et S. Berbenni

DOI: https://doi.org/10.1051/jp4:20030192

Precipitate induced anisotropy effects in aluminium alloys p. 239

T. Foglesong, H. Sehitoglu et H.J. Maeir

DOI: https://doi.org/10.1051/jp4:20030193

Experimental analysis and multiscale modelling of the anisotropic mechanical and magnetostrictive behaviours of electrical steels p. 247

L. Daniel, O. Hubert, F. Ossart et R. Billardon

DOI: https://doi.org/10.1051/jp4:20030194

On the numerical implementation of non-smooth domains. Part I: Rate-dependent formulations p. 255

E.P. Busso et G. Cailletaud

DOI: https://doi.org/10.1051/jp4:20030195

Modelling crack propagation due to growth stress release in round wood p. 265

D. Jullien et J. Gril

DOI: https://doi.org/10.1051/jp4:20030196

Cosserat moduli of anisotropic cancellous bone: A micromechanical analysis p. 273

J. Fatemi, P.R. Onck, G. Poort et F. Van Keulen

DOI: https://doi.org/10.1051/jp4:20030197

Directional model for anisotropic hyperelastic rubber-like materials p. 281

J. Diani, M. Brieu, J.M. Vacherand et A. Rezgui

DOI: https://doi.org/10.1051/jp4:20030198

Unified constitutive modeling of anisotropic hyperelastic materials at large strains p. 289

M. Itskov et N. Aksel

DOI: https://doi.org/10.1051/jp4:20030199

Description of anisotropic behaviour of AA3103-0 aluminium alloy using two recent yield criteria p. 297

D. Banabic, O. Cazacu, F. Barlat, D.S. Comsa, S. Wagner et K. Siegert

DOI: https://doi.org/10.1051/jp4:20030200

Anisotropic bounding surface plasticity with rotational hardening for unsaturated frictional materials p. 305

M. Datcheva et T. Schanz

DOI: https://doi.org/10.1051/jp4:20030201

Damage model for quasi-brittle solids: Coupled effects of induced and initial anisotropy p. 313

D. Halm, A. Dragon et Y. Charles

DOI: https://doi.org/10.1051/jp4:20030202

Anisotropic damage formation in brittle rock: Experimental study by means of acoustic emission and Kaiser effect p. 321

A. Lavrov, A. Vervoort et M. Wevers

DOI: https://doi.org/10.1051/jp4:20030203

An alternative 3D model for damage induced anisotropy and unilateral effect in microcracked materials p. 329

H. Welemane et F. Cormery

DOI: https://doi.org/10.1051/jp4:20030204

A unified model to describe the anisotropic viscoplastic behaviour of zircaloy-4 cladding tubes between 320 °C and 400 °C from an unirradiated state to high fluence and under fast neutron flux p. 339

P. Delobelle, F. Richard et S. Leclercq

DOI: https://doi.org/10.1051/jp4:20030205

Yield locus and work hardening behavior of a thin-walled steel tube subjected to combined tension-internal pressure p. 347

T. Kuwabara, M. Ishiki, M. Kuroda et S. Takahashi

DOI: https://doi.org/10.1051/jp4:20030206

Strain path dependency in metal plasticity p. 355

E.M. Viatkina, W.A.M. Brekelmans et M.G.D. Geers

DOI: https://doi.org/10.1051/jp4:20030207

Anisotropic growth of materials p. 365

G.A. Maugin et S. Imatani

DOI: https://doi.org/10.1051/jp4:20030208

Finite deformation of random elastic networks: A molecular dynamics study p. 373

A. Alaoui et K. Sab

DOI: https://doi.org/10.1051/jp4:20030209

Journal de Physique IV (Proceedings)

Volume 105 (March 2003)

EUROMECH-MECAMAT p. III

Constitutive parameters identification for elastoplastic materials in finite deformation p. 3