Journal de Physique IV

Synthesis and oxidation resistance of MoSi₂-SiC composites p. Pr6-3

K. Kurokawa, M. Ube, Hideaki Takahashi et Heishichiro Takahashi

DOI: https://doi.org/10.1051/jp4:2000601

PDF (1.877 MB)

Microstructural design criteria of fully lamellar TiAl alloys for improved creep strength p. Pr6-9

K. Maruyama, R. Yamamoto et G. Wegmann

DOI: https://doi.org/10.1051/jp4:2000602

PDF (337.2 KB)

Variations in the α₂/γ lamellar microstructure in Ti48Al alloys as a function of cooling rate and oxygen content p. Pr6-15

F. Perdrix, M. Cornet, J. Bigot et J.-P. Chevalier

DOI: https://doi.org/10.1051/jp4:2000603

PDF (255.8 KB)

Correlation between microstructure and transformation behaviour in bulk and rapidly solidified shape memory alloys p. Pr6-21

C. Elgoyhen, M. Larnicol, P. Ochin et R. Portier

DOI: https://doi.org/10.1051/jp4:2000604

PDF (2.274 MB)

Magnetic and mechanical properties of ultrafine Fe/Cu laminates produced by repeated rolling p. Pr6-27

M. Sasaki, D. Imai, K. Shirae et N. Igata

DOI: https://doi.org/10.1051/jp4:2000605

PDF (1006 KB)

Nanostructure formation and phase transformation in intermetallic compounds during severe plastic deformation p. Pr6-33

O. Dimitrov, A.V. Korznikov, G.F. Korznikova et G. Tram

DOI: https://doi.org/10.1051/jp4:2000606

PDF (1.428 MB)

Control of primary α phase morphology in beta metastable titanium alloys p. Pr6-39

E. Gautier, E. Laude, R. Sanguinetti-Ferrera et S. Denis

DOI: https://doi.org/10.1051/jp4:2000607

PDF (36.61 KB)

Grain boundary engineering for high performance structural and functional materials p. Pr6-41

T. Watanabe

DOI: https://doi.org/10.1051/jp4:2000608

PDF (862.2 KB)

Mechanical behaviour of thin films on substrates : Debonding and buckling p. Pr6-47

F. Cleymand, C. Coupeau, J. Colin et J. Grilhé

DOI: https://doi.org/10.1051/jp4:2000609

PDF (694.6 KB)

Structure and properties of hard coatings produced by dynamic ion mixing p. Pr6-53

J.P. Rivière

DOI: https://doi.org/10.1051/jp4:2000610

PDF (1.645 MB)

Martensitic transition of Cu-13.2Al-3Ni (wt.%) shape memory alloy studied by isothermal mechanical spectrometry p. Pr6-59

V. Pelosin, G. Covarel et A. Rivière

DOI: https://doi.org/10.1051/jp4:2000611

PDF (238.0 KB)

Island formation by stress induced diffusion on the surface of a very thin layer epitaxially stressed on a substrate p. Pr6-65

J. Colin et J. Grilhé

DOI: https://doi.org/10.1051/jp4:2000612

PDF (616.7 KB)

Microstructure and texture in secondary recrystallized silicon steel p. Pr6-73

S. Suzuki, S. Takebayashi et Y. Ushigami

DOI: https://doi.org/10.1051/jp4:2000613

PDF (2.010 MB)

An experimental and theoretical study of bonding mechanisms in ternary γ-TiAl + X (X = Cr, Mn, Nb) alloys p. Pr6-79

M. Jaouen, T. Sikora, G. Hug et M.G. Walls

DOI: https://doi.org/10.1051/jp4:2000614

PDF (281.8 KB)

High-angle annular dark-field STEM of partially ordered Ni-19.5at%Mo alloys p. Pr6-85

N. Tanaka, N. Suzuki, M. Kawasaki, S. Hata, N. Kuwano et K. Oki

DOI: https://doi.org/10.1051/jp4:2000615

PDF (1.360 MB)

3D atom probe investigation of nanocomposite wires p. Pr6-91

X. Sauvage, A. Guillet, F. Danoix et D. Blavette

DOI: https://doi.org/10.1051/jp4:2000616

PDF (241.9 KB)

Application of HRTEM to studies of electronic structure and atomic configuration of interface in SiC/SiC composites p. Pr6-97

T. Shibayama, G.W. He, Heishichiro Takahashi et A. Kohyama

DOI: https://doi.org/10.1051/jp4:2000617

PDF (653.8 KB)

Ultrafine-grain ferrite steel and its mechanical properties p. Pr6-105

K. Nagai

DOI: https://doi.org/10.1051/jp4:2000618

PDF (551.2 KB)

3D atomic investigation of solute segregation to both planar and line defects in metallic alloys p. Pr6-111

D. Blavette, A. Fraczkeiwicz et E. Cadel

DOI: https://doi.org/10.1051/jp4:2000619

PDF (47.60 KB)

Internal friction of Fe/Cu laminated composite metal p. Pr6-113

N. Igata, M. Sasaki, Y. Kogo et K. Hishitani

DOI: https://doi.org/10.1051/jp4:2000620

PDF (743.0 KB)

Mechanical relaxations in LAS-type glass and glass-ceramics related with microstructure p. Pr6-119

L. Arnault et A. Rivière

DOI: https://doi.org/10.1051/jp4:2000621

PDF (249.0 KB)

In situ straining deformation of superalloys and intermetallics p. Pr6-125

A. Coujou, A. Couret, F. Pettinari et N. Clement

DOI: https://doi.org/10.1051/jp4:2000622

PDF (1.857 MB)

Electron diffraction (LACBED) and HRTEM Moiré fringe pattern study of stress in YBaCuO thin film on Mg0 p. Pr6-131

F. Pailloux et R.J. Gaboriaud

DOI: https://doi.org/10.1051/jp4:2000623

PDF (1.379 MB)

Deformation behavior of Zr-based bulk metallic glasses in a wide temperature range p. Pr6-139

S. Takeuchi, T. Kakegawa,, N. Hirose et K. Jinzai

DOI: https://doi.org/10.1051/jp4:2000624

PDF (1.665 MB)

A discrete dislocation model of Stage I fatigue crack growth and an analysis of Mode I to Mode II transition at low ΔK₁ p. Pr6-145

V. Doquet

DOI: https://doi.org/10.1051/jp4:2000625

PDF (312.2 KB)

Strain hardening rate in relation to microstructure in precipitation hardening materials p. Pr6-151

A. Deschamps, S. Esmaeili, W.J. Poole et M. Militzer

DOI: https://doi.org/10.1051/jp4:2000626

PDF (287.9 KB)

Grain boundary-related high temperature plasticity in oxide ceramics : The effect of cation doping p. Pr6-157

T. Sakuma

DOI: https://doi.org/10.1051/jp4:2000627

PDF (311.3 KB)

Dislocation pinning by glissile interstitial loops in a FCC nickel crystal. A molecular dynamics study p. Pr6-163

D. Rodney et G. Martin

DOI: https://doi.org/10.1051/jp4:2000628

PDF (18.50 KB)

Intragranular plasticity of β Si₃N₄ between 20 °C and 700 °C p. Pr6-165

X. Milhet, J.L. Demenet et J. Rabier

DOI: https://doi.org/10.1051/jp4:2000629

PDF (1.183 MB)

Misorientation dependence of grain boundary segregation under electron irradiation in an austenitic stainless steel p. Pr6-173

S. Watanabe, Y. Takamatsu, N. Sakaguchi et Heishichiro Takahashi

DOI: https://doi.org/10.1051/jp4:2000630

PDF (246.1 KB)

Modelling of hydrogen - dislocation interactions during stress corrosion cracking p. Pr6-179

T. Magnin et D. Delafosse

DOI: https://doi.org/10.1051/jp4:2000631

PDF (1.732 MB)

Statistical approach for evaluating SCC initiation and propagation behavior of sensitized Type 304 stainless steel p. Pr6-185

T. Shibata, S. Zhang et T. Haruna

DOI: https://doi.org/10.1051/jp4:2000632

PDF (245.3 KB)

Simulation of the irradiation effects in reactor materials : The REVE project p. Pr6-191

S. Jumel, C. Domain, J. Ruste, J.C. Van Duysen, C. Becquart, A. Legris, P. Pareige, A. Barbu et V. Pontikis

DOI: https://doi.org/10.1051/jp4:2000633

PDF (233.2 KB)

Electron backscattered diffraction and atomic force microscopy analysis of slip bands induced by fatigue in 316L austenitic stainless steel p. Pr6-197

L. Sabatier, P. Villechaise et J.C. Girard

DOI: https://doi.org/10.1051/jp4:2000634

PDF (1.492 MB)

Le Journal de Physique IV

Volume 10 / Numéro PR6 (April 2000)

The Sixth Japan-France Materials Science Seminar
JFMSS-6
Microstructural Design for Improved Mechanical Behaviour of Advanced Materials

Synthesis and oxidation resistance of MoSi₂-SiC composites p. Pr6-3

Microstructural design criteria of fully lamellar TiAl alloys for improved creep strength p. Pr6-9

Variations in the α₂/γ lamellar microstructure in Ti48Al alloys as a function of cooling rate and oxygen content p. Pr6-15

Correlation between microstructure and transformation behaviour in bulk and rapidly solidified shape memory alloys p. Pr6-21

Magnetic and mechanical properties of ultrafine Fe/Cu laminates produced by repeated rolling p. Pr6-27

Nanostructure formation and phase transformation in intermetallic compounds during severe plastic deformation p. Pr6-33

Control of primary α phase morphology in beta metastable titanium alloys p. Pr6-39

Grain boundary engineering for high performance structural and functional materials p. Pr6-41

Mechanical behaviour of thin films on substrates : Debonding and buckling p. Pr6-47

Structure and properties of hard coatings produced by dynamic ion mixing p. Pr6-53

Martensitic transition of Cu-13.2Al-3Ni (wt.%) shape memory alloy studied by isothermal mechanical spectrometry p. Pr6-59

Island formation by stress induced diffusion on the surface of a very thin layer epitaxially stressed on a substrate p. Pr6-65

Microstructure and texture in secondary recrystallized silicon steel p. Pr6-73

An experimental and theoretical study of bonding mechanisms in ternary γ-TiAl + X (X = Cr, Mn, Nb) alloys p. Pr6-79

High-angle annular dark-field STEM of partially ordered Ni-19.5at%Mo alloys p. Pr6-85

3D atom probe investigation of nanocomposite wires p. Pr6-91

Application of HRTEM to studies of electronic structure and atomic configuration of interface in SiC/SiC composites p. Pr6-97

Ultrafine-grain ferrite steel and its mechanical properties p. Pr6-105

3D atomic investigation of solute segregation to both planar and line defects in metallic alloys p. Pr6-111

Internal friction of Fe/Cu laminated composite metal p. Pr6-113

Mechanical relaxations in LAS-type glass and glass-ceramics related with microstructure p. Pr6-119

In situ straining deformation of superalloys and intermetallics p. Pr6-125

Electron diffraction (LACBED) and HRTEM Moiré fringe pattern study of stress in YBaCuO thin film on Mg0 p. Pr6-131

Deformation behavior of Zr-based bulk metallic glasses in a wide temperature range p. Pr6-139

A discrete dislocation model of Stage I fatigue crack growth and an analysis of Mode I to Mode II transition at low ΔK₁ p. Pr6-145

Strain hardening rate in relation to microstructure in precipitation hardening materials p. Pr6-151

Grain boundary-related high temperature plasticity in oxide ceramics : The effect of cation doping p. Pr6-157

Dislocation pinning by glissile interstitial loops in a FCC nickel crystal. A molecular dynamics study p. Pr6-163

Intragranular plasticity of β Si₃N₄ between 20 °C and 700 °C p. Pr6-165

Misorientation dependence of grain boundary segregation under electron irradiation in an austenitic stainless steel p. Pr6-173

Modelling of hydrogen - dislocation interactions during stress corrosion cracking p. Pr6-179

Statistical approach for evaluating SCC initiation and propagation behavior of sensitized Type 304 stainless steel p. Pr6-185

Simulation of the irradiation effects in reactor materials : The REVE project p. Pr6-191

Electron backscattered diffraction and atomic force microscopy analysis of slip bands induced by fatigue in 316L austenitic stainless steel p. Pr6-197

Le Journal de Physique IV

Volume 10 / Numéro PR6 (April 2000)

The Sixth Japan-France Materials Science SeminarJFMSS-6Microstructural Design for Improved Mechanical Behaviour of Advanced Materials

Synthesis and oxidation resistance of MoSi2-SiC composites p. Pr6-3

Microstructural design criteria of fully lamellar TiAl alloys for improved creep strength p. Pr6-9

Variations in the α2/γ lamellar microstructure in Ti48Al alloys as a function of cooling rate and oxygen content p. Pr6-15

Correlation between microstructure and transformation behaviour in bulk and rapidly solidified shape memory alloys p. Pr6-21

Magnetic and mechanical properties of ultrafine Fe/Cu laminates produced by repeated rolling p. Pr6-27

Nanostructure formation and phase transformation in intermetallic compounds during severe plastic deformation p. Pr6-33

Control of primary α phase morphology in beta metastable titanium alloys p. Pr6-39

Grain boundary engineering for high performance structural and functional materials p. Pr6-41

Mechanical behaviour of thin films on substrates : Debonding and buckling p. Pr6-47

Structure and properties of hard coatings produced by dynamic ion mixing p. Pr6-53

Martensitic transition of Cu-13.2Al-3Ni (wt.%) shape memory alloy studied by isothermal mechanical spectrometry p. Pr6-59

Island formation by stress induced diffusion on the surface of a very thin layer epitaxially stressed on a substrate p. Pr6-65

Microstructure and texture in secondary recrystallized silicon steel p. Pr6-73

An experimental and theoretical study of bonding mechanisms in ternary γ-TiAl + X (X = Cr, Mn, Nb) alloys p. Pr6-79

High-angle annular dark-field STEM of partially ordered Ni-19.5at%Mo alloys p. Pr6-85

3D atom probe investigation of nanocomposite wires p. Pr6-91

Application of HRTEM to studies of electronic structure and atomic configuration of interface in SiC/SiC composites p. Pr6-97

Ultrafine-grain ferrite steel and its mechanical properties p. Pr6-105

3D atomic investigation of solute segregation to both planar and line defects in metallic alloys p. Pr6-111

Internal friction of Fe/Cu laminated composite metal p. Pr6-113

Mechanical relaxations in LAS-type glass and glass-ceramics related with microstructure p. Pr6-119

In situ straining deformation of superalloys and intermetallics p. Pr6-125

Electron diffraction (LACBED) and HRTEM Moiré fringe pattern study of stress in YBaCuO thin film on Mg0 p. Pr6-131

Deformation behavior of Zr-based bulk metallic glasses in a wide temperature range p. Pr6-139

A discrete dislocation model of Stage I fatigue crack growth and an analysis of Mode I to Mode II transition at low ΔK1 p. Pr6-145

Strain hardening rate in relation to microstructure in precipitation hardening materials p. Pr6-151

Grain boundary-related high temperature plasticity in oxide ceramics : The effect of cation doping p. Pr6-157

Dislocation pinning by glissile interstitial loops in a FCC nickel crystal. A molecular dynamics study p. Pr6-163

Intragranular plasticity of β Si3N4 between 20 °C and 700 °C p. Pr6-165

Misorientation dependence of grain boundary segregation under electron irradiation in an austenitic stainless steel p. Pr6-173

Modelling of hydrogen - dislocation interactions during stress corrosion cracking p. Pr6-179

Statistical approach for evaluating SCC initiation and propagation behavior of sensitized Type 304 stainless steel p. Pr6-185

Simulation of the irradiation effects in reactor materials : The REVE project p. Pr6-191

Electron backscattered diffraction and atomic force microscopy analysis of slip bands induced by fatigue in 316L austenitic stainless steel p. Pr6-197

The Sixth Japan-France Materials Science Seminar
JFMSS-6
Microstructural Design for Improved Mechanical Behaviour of Advanced Materials

Synthesis and oxidation resistance of MoSi₂-SiC composites p. Pr6-3

Variations in the α₂/γ lamellar microstructure in Ti48Al alloys as a function of cooling rate and oxygen content p. Pr6-15

A discrete dislocation model of Stage I fatigue crack growth and an analysis of Mode I to Mode II transition at low ΔK₁ p. Pr6-145

Intragranular plasticity of β Si₃N₄ between 20 °C and 700 °C p. Pr6-165