| Numéro |
J. Phys. IV France
Volume 01, Numéro C3, Octobre 1991
DYMAT 1991 - 3rd International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading
|
|
|---|---|---|
| Page(s) | C3-247 - C3-252 | |
| DOI | https://doi.org/10.1051/jp4:1991334 | |
J. Phys. IV France 01 (1991) C3-247-C3-252
DOI: 10.1051/jp4:1991334
COMPORTEMENT DE PLAQUES ÉPAISSES À L'IMPACT NORMAL DE CYLINDRES
A. NEME1, N. DAHAN1 et S. FOUQUET21 Laboratoire de Mécanique et Technologie/CNRS/PARIS VI, ENS de Cachan, 61 avenue du Président Wilson, F-94230 Cachan, France
2 Etablissement Technique Central de l'Armement, CREA, 16 bis avenue Prieur de la Côte d'Or, F-94114 Arcueil, France
Abstract
The study of normal impact of cylinders on thick plates usually needs finite element calculations. It implies special softwares using and long-time solving. In order to reduce both calculation costs and the analysis field of this large problem, a new approach is performed. An analytical modelling is coupled with a numerical time integration of impact on isotropic rigid plastic metal plates by rigid rods. Impact velocity range is below 2000 m/s. Modelling is based on the choice of a 2-parameters continuum differentiable eulerien velocity field. It also fulfiled the material non compressibility, the kinematic boundary and stress boundary conditions according to the mechanical behaviour of the plate. A new extremum principle is developped and used to obtain the dimensions of the strained area in the plate. The energy balance of the plate-cylinder system leads to rod's acceleration. Meanwhile, only penetration phenomenon is studied in this paper.
© EDP Sciences 1991