Numéro
J. Phys. IV France
Volume 04, Numéro C4, Avril 1994
3rd International Conference Laser M2P
Page(s) C4-77 - C4-80
DOI http://dx.doi.org/10.1051/jp4:1994415
3rd International Conference Laser M2P

J. Phys. IV France 04 (1994) C4-77-C4-80

DOI: 10.1051/jp4:1994415

Laser surface alloying of 316L stainless steel : different hardening routes and related microstructures

F. LAROUDIE, C. TASSIN and M. PONS

Laboratoire Science des Surfaces et Matériaux Carbonés, URA 413 du CNRS, ENS d'Electrochimie et d'Electrométallurgie de Grenoble, Institut National Polytechnique de Grenoble, Domaine Universitaire, BP. 75, 38402 Saint-Martin-d'Hères, France


Abstract
The goal of this study is to investigate different hardening routes for 316L stainless steel by laser surface alloying. We have investigated the incorporation of hard submicronic particles of Tic, the precipitation of titanium carbide from mixtures of Ti and SiC and the formation of iron-chromium carbides by carbon incorporation. For each hardening route we present the microstructure and the hardness of the processed surface alloys and the conditions leading to the best compromise between highest hardness, best homogeneity and lowest occurence of cracks. From these results it can be reasoned that hardening by iron-chromium carbides is the best route and that this surface alloy is a good candidate for some tribological applications.



© EDP Sciences 1994