Numéro
J. Phys. IV France
Volume 03, Numéro C7, Novembre 1993
The 3rd European Conference on Advanced Materials and Processes
Troisiéme Conférence Européenne sur les Matériaux et les Procédés Avancés
Page(s) C7-541 - C7-544
DOI http://dx.doi.org/10.1051/jp4:1993788
The 3rd European Conference on Advanced Materials and Processes
Troisiéme Conférence Européenne sur les Matériaux et les Procédés Avancés

J. Phys. IV France 03 (1993) C7-541-C7-544

DOI: 10.1051/jp4:1993788

Thermal cycling of Pb/Sn eutectic alloy

S.F. MOSTAFA, Z.M. EL-BARADIE, H.N. EL-DIN and T.A. EL-BASSUNY

CMRDI, P.O. 87, Helwan, Cairo, Egypt


Abstract
Severe deformation, annealed and thermal cycling are employed on Pb/Sn eutectic alloy. The cycling was carried out between room temperature and 140°C, and the cycling number ranged from 0 to 1300 cycles. Microstructural studies revealed that grain size and volume fraction were increased by thermal cycling. The morphology of lamellar structure changed to spherical structure by severe deformation and annealing. No effect of thermal cycling on morphology was observed. The dimensional change after cycling was anisotropic ; the length expanded, whereas the width and thickness shrank. These changes in dimensions are attributed to elastic and plastic strains, and / or creep strain. Preliminary tensile test measurements showed that "m"-valued ecreased by cycling. Also, total ductility decreased. These are due to the increase in both grain size and volume fraction.



© EDP Sciences 1993