Accès gratuit
Numéro
J. Phys. IV France
Volume 01, Numéro C4, Novembre 1991
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATION AND SHAPE MEMORY PROPERTIES
Page(s) C4-355 - C4-360
DOI http://dx.doi.org/10.1051/jp4:1991453
EUROPEAN SYMPOSIUM ON MARTENSITIC TRANSFORMATION AND SHAPE MEMORY PROPERTIES

J. Phys. IV France 01 (1991) C4-355-C4-360

DOI: 10.1051/jp4:1991453

MICROSTRUCTURE AND PHASE-TRANSFORMATION IN MELTSPUN SHAPE MEMORY ALLOYS

P. DONNER

Ruhr-Universität Bochum, Institut für Werkstoffe, Postfach 10 21 48, D-4630 Bochum, Germany


Abstract
The rapid solidification at the meltspinning process causes a microcrystalline structure in the ribbon-shaped semifinished products, in which the microstructure is strongly affected by the cooling-rate. Hence follows a homogeneous microstructure for copper-based alloys in every cooling-condition and a micro-segregated dendritic structure at low and intermediate cooling-rates for the Fe-Mn-based specimen. Differential scanning-calorimetry and electrical resistance provide data on the starting temperatures and the course of martensitic transformation in as-quenched and recrystallized ribbons. The incomplete martensitic transformation of the Fe-Mn-based specimens is observed by X-Ray measurements. The mechanical properties and the shape memory effect of the ribbons are compared to those of the conventionally produced material. Furthermore the effect of heat-treatments in copper-based ribbons will be described.



© EDP Sciences 1991