Numéro
J. Phys. IV France
Volume 02, Numéro C2, Septembre 1991
Proceedings of the Eighth European Conference on Chemical Vapour Deposition / Actes de la 8ème Confèrence Européenne sur les Dépôts Chimiques en Phase Gazeuse
Page(s) C2-681 - C2-688
DOI http://dx.doi.org/10.1051/jp4:1991282
Proceedings of the Eighth European Conference on Chemical Vapour Deposition / Actes de la 8ème Confèrence Européenne sur les Dépôts Chimiques en Phase Gazeuse

J. Phys. IV France 02 (1991) C2-681-C2-688

DOI: 10.1051/jp4:1991282

LPCVD SiC COATINGS ON UNIDIRECTIONAL CARBON FIBRE-YARNS : APPLICATION TO ALUMINIUM MATRIX COMPOSITES

M.H. VIDAL-SÉTIF and J.L. GÉRARD

ONERA, Materials Science Department, BP 72, F-92322 Chatillon, France


Abstract
SiC has been chosen as a diffusion barrier in carbon/aluminium metal matrix composites. P55 carbon tows are coated with a thin SiC layer applied in a continuous LPCVD process from a Si(CH3)4-H2 mixture, using a hot wall reactor. Deposition parameters (temperature, pressure, flow rates of reactants, fibres passing rate) are determined in order to ensure a good compromise between a thorough infiltration of the yarn and the carbon amount in the SiC. The coatings on the fibres are characterized in two ways : direct observation and evaluation of the coating thickness on metallographic cross sections of a mounted tow ; determination of the composition and thickness of the layer by EPMA on isolated fibres. Coated fibres are included in an aluminium matrix and a composite is fabricated by liquid phase hot pressing : the effect of the coating is observed and discussed. An optimization of the CVD infiltration parameters is still necessary to reduce the variations in coating thickness between the core of the yarn and the external fibres.



© EDP Sciences 1991