Journal de Physique IV

Sommaire

J. Phys. IV France Vol. 110 No. 1

Journal de Physique IV (Proceedings)

Vol. 110 (September 2003)

EURODYMAT 2003 - 7th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading
Porto, Portugal - September 8-10, 2003

J. Cirne, A. Lichtenberger

ISBN 2-86883-689-5

Foreword p. V
Carlos Navarro

On the myth of plastic waves p. 3
Y. Horie
Abstract | PDF file (165 KB)

A new constitutive model for nitrogen austenitic stainless steel p. 9
S. Fréchard, A. Lichtenberger, F. Rondot, N. Faderl, A. Redjaïmia and M. Adoum
Abstract | PDF file (678 KB)

Influence of strain rate and temperature on the compressive ductility of AI, Mg and Ti alloys p. 15
E. El-Magd and M. Abouridouane
Abstract | PDF file (587 KB)

A material model for anisotropic metals p. 21
T. De Vuyst, R. Vignjevic, J. Mirkovic and J. Campbell
Abstract | PDF file (628 KB)

Determining the constitutive response of polymeric materials as a function of temperature and strain rate p. 27
C.M. Cady, W.R. Blumenthal, G.T. Gray III and D.J. Idar
Abstract | PDF file (451 KB)

A study of the mechanical properties of PMMA and PS at strain rates of 10 ^-4 to 10 ³ over the temperature range 293-363 K p. 33
G.M. Swallowe and S.F. Lee
Abstract | PDF file (338 KB)

Modeling of strain rates and temperature effects on the yield behavior of amorphous polymers p. 39
J. Richeton, S. Ahzi, L. Daridon and Y. Rémond
Abstract | PDF file (289 KB)

Modeling the comminution and flow of granular brittle material p. 45
D.R. Curran and T. Cooper
Abstract | PDF file (399 KB)

Constitutive equations at high rates of loading p. 51
J. Suvorova and I. Viktorova
Abstract | PDF file (274 KB)

Stress-strain behaviour of IM7/977-2 and IM7/APC2 carbon fibre composites at low and high strain rates p. 57
D.J. Parry and F.S. Al-Hazmi
Abstract | PDF file (448 KB)

Continuum damage modeling for ductile metals under high strain rate deformation p. 63
C. Husson, S. Ahzi, L. Daridon and T. Courtine
Abstract | PDF file (300 KB)

Tensile and compressive properties of wrought magnesium alloys at high rates of strain p. 69
T. Yokoyama
Abstract | PDF file (356 KB)

The modeling of mesodefect kinetics peculiarities on a stress wave front p. 75
O.A. Plekhov
Abstract | PDF file (343 KB)

A comparison of the dynamic shear properties and fracture behaviour of continuous and pulsed current plasma arc weldments of 304L stainless steel p. 81
W.-S. Lee, C.-Y. Liu, C.-F. Lin and M.-H. Chiang
Abstract | PDF file (921 KB)

Effects of strain and strain-rate on the formation of the shear band in metals p. 87
L. Qiang and M.N. Bassim
Abstract | PDF file (702 KB)

Strain rate dependency of dynamic flow stress of iron in wide strain rate range p. 93
K. Sakino
Abstract | PDF file (555 KB)

A modeling of visco-plastic behavior of lead and a lead alloy over a wide range of strain rate and temperature p. 99
T. Grunenwald, F. Llorca and J. Farre
Abstract | PDF file (469 KB)

Constitutive relations for copper with two mechanisms including twinning for a use under shock wave loading p. 105
J. Petit and J.-L. Dequiedt
Abstract | PDF file (465 KB)

Temperature, microstructure and mechanical response during shear-band formation in different metallic materials p. 111
R. Clos, U. Schreppel and P. Veit
Abstract | PDF file (1.56 MB)

Study of high strain rate plastic deformation of low carbon microalloyed steels using experimental observation and computational modeling p. 117
J. Majta, A.K. Zurek, C.P. Trujillo and A. Bator
Abstract | PDF file (487 KB)

High strain rate response of epoxy in tensile and shear loading p. 123
A. Gilat, R. K. Goldberg and G. D. Roberts
Abstract | PDF file (237 KB)

Rate dependent yield and post-yield behavior of engineering polymers p. 129
Z. Major and R. W. Lang
Abstract | PDF file (378 KB)

Deformation of aluminum alloys AD-1, AMg-6 and D-16 at dynamic compression and temperatures of 25-250 $^{\circ}$ C p. 135
V. A. Pushkov, S. A. Novikov, V. A. Sinitsyn and I. N. Govorunov
Abstract | PDF file (294 KB)

Constitutive modelling of CK45N, AlZnMgCu1.5 and Ti-6Al-4V in a wide range of strain rate and temperature p. 141
E. El-Magd, C. Treppmann and M. Korthäuer
Abstract | PDF file (341 KB)

Modeling and simulation of dynamic failure in metals p. 147
L. Campagne, L. Daridon and S. Ahzi
Abstract | PDF file (439 KB)

Observation of the shear failure mode in nanostructured titanium under quasistatic uniaxial compression at 300-4.2 K p. 153
E. D. Tabachnikova, V. Z. Bengus, K. Csach, J. Miskuf, V. V. Stotyarov and R. Z. Valiev
Abstract | PDF file (666 KB)

Thermomechanical properties of polycarbonate under dynamic loading p. 159
V. Lerch, G. Gary and P. Hervé
Abstract | PDF file (374 KB)

Structure of metal materials under bulk doping p. 165
S. Gubenko, S. Usherenko, V. Sitalo and Yu. Bunchuk
Abstract | PDF file (938 KB)

Strain rate influence on yield stress of some metals p. 171
A. V. Shirokov, G. Stepanov and V. Zubov
Abstract | PDF file (394 KB)

Orthotropic damage in high-strength steel sheets. An elasto-viscoplastic material model with mixed hardening p. 177
E. Omerspahic and K. Mattiasson
Abstract | PDF file (381 KB)

Ductile failure of steel HY80 under high strain rates and triaxial stress states, experimental results and damage description p. 183
S. Abdel-Malek, Th. Halle and L. W. Meyer
Abstract | PDF file (561 KB)

Stress-deformation behaviour of high manganese (AI, Si) TRIP and TWIP steels p. 189
L. Krüger, L. W. Meyer, U. Brûx, G. Frommeyer and O. Grässel
Abstract | PDF file (411 KB)

The effect of strain rate of dynamically loaded copper on temperature accumulation p. 195
V. Barannikov and E. Nikolaeva
Abstract | PDF file (332 KB)

Identification and comparison of different constitutive laws for high speed solicitation p. 201
C. Sattouf, O. Dalverny and R. Rakotomalala
Abstract | PDF file (475 KB)

Constitutive modelling of a tungsten heavy metal alloy p. 207
P. Skoglund
Abstract | PDF file (433 KB)

Behavior of hot dip galvanized dual phase sheet steels at high rates of deformation p. 213
T. Vuoristo, M. Apostol, V.-T. Kuokkala and P. Peura
Abstract | PDF file (648 KB)

Physical-mechanical and operation characteristics of some new alloys of the Fe-Cr-C-N system p. 219
B. V. Kolev
Abstract | PDF file (583 KB)

Mechanical behaviours of cement based materials at high rates of strain p. 225
A. M. Bragov, P. Demenko, L. Kruszka, A. K. Lomunov and R. Rekucki
Abstract | PDF file (459 KB)

Static and dynamic response of ceramics and zirconium alumina concrete materials p. 231
F. Akopov, A. M. Bragov, P. Demenko, L. Kruszka, A. K. Lomunov, V. Mineev and L. V. Sergeichev
Abstract | PDF file (383 KB)

Influence of micro-inhomogeneity of plastic deformation in metals on their strength p. 237
G. Stepanov, V. Zubov and L. Kruszka
Abstract | PDF file (278 KB)

Development of the energy criterion of brittle fracture toughness for the case of combined loading p. 243
V.N. Petrov, V.V. Lepov and Hr.N. Semyonov
Abstract | PDF file (290 KB)

Simulation for elasto-plastic behavior of artificial 3D-structure under shock wave loading p. 251
V. Romanova, R. Balokhonov, E. Soppa, S. Schmauder and P. Makarov
Abstract | PDF file (830 KB)

Impact shear-numerical analyses of ASB evolution and failure for Ti-6AI-4V alloy p. 257
P. Chwalik, J.R. Klepaczko and A. Rusinek
Abstract | PDF file (570 KB)

Dynamic upsetting and failure of metal cylinders: Experiments and analysis p. 263
D.D. Radford, S.M. Walley, P. Church and J.E. Field
Abstract | PDF file (540 KB)

1-D and 2-D modeling of U-Ti alloy response in impact experiments p. 269
B. Hermann, V. Favorsky, A. Landau, D. Shvarts and E.B. Zaretsky
Abstract | PDF file (659 KB)

Simulation of failure under dynamic leading at different states of triaxiality for a nickel-base superalloy p. 275
K.N. Singh, R. Sievert, H.-D. Noack, R. Clos, U. Schreppel, P. Veit, A. Hamann and D. Klingbeil
Abstract | PDF file (997 KB)

Numerical simulation of damage using an elastic-viscoplastic model with directional tensile failure p. 281
I. Lomov and M.B. Robin
Abstract | PDF file (490 KB)

Linear stability analysis of multiple necking in rapidly expanded thin tube p. 287
S. Mercier and A. Molinari
Abstract | PDF file (313 KB)

Electromagnetic forming of aluminium alloy sheet p. 293
D.A. Oliveira and M. Worswick
Abstract | PDF file (802 KB)

A numerical model to describe damage in glass under impact loading p. 299
X. Brajer, F. Hild, S. Roux and R. Gy
Abstract | PDF file (626 KB)

Numerical simulation of dynamic TPB fracture test in a modified Hopkinson bar p. 305
J. Loya, J. Fernandez-Saez and C. Navarro
Abstract | PDF file (378 KB)

Advanced numerical models and material characterisation techniques for composite materials subject to impact and shock wave loading p. 311
R.A. Clegg, D.M. White, C. Hayhurst, W. Ridel, W. Harwick and S. Hiermaier
Abstract | PDF file (553 KB)

High strain rate model involving damage by adiabatic shear banding and related anisotropy p. 317
P. Longere, A. Dragon, H. Trumel, T. de Rességuier, X. Deprince and E. Petitpas
Abstract | PDF file (598 KB)

Molecular dynamics investigations of elastic-plastic properties of solids p. 323
F.A. Sapozhnikov, V.V. Dremov and M.S. Smirnova
Abstract | PDF file (1.14 MB)

Impact tension of sheet metals - Effect of initial specimen length p. 329
A. Rusinek and J.R. Klepaczko
Abstract | PDF file (454 KB)

Experimental and numerical modeling of the heterogeneous materials fracture p. 335
V.V. Lepov, E.A. Arkhangelskaya, V.T. Alymov and V.P. Larionov
Abstract | PDF file (1.06 MB)

Acceleration of the plates of an ERA cassette using a rigid plastic Gurney model p. 341
Y. Partom
Abstract | PDF file (241 KB)

Numerical modelling of SHPB splitting tests p. 347
F. Galvez and V. Sanchez Galvez
Abstract | PDF file (569 KB)

Analysis of the dynamic SHPB test using the finite element simulation p. 353
A. Gavrus, P. Caestecker, E. Ragneau and B. Davoodi
Abstract | PDF file (596 KB)

Advances in fracture algorithm development in GRIM p. 359
I. Cullis, P. Church, P. Greenwood, W. Huntington-Thresher and M. Reynolds
Abstract | PDF file (648 KB)

Numerical modelling of tube system nonlinear dynamics p. 365
T.N. Fesenko, A.G. Tabakov, N.V. Shariy, V.I. Sotonin and J.V. Baranov
Abstract | PDF file (395 KB)

Numerical simulation of the dynamic Brazilian test on a high filled polymer p. 371
M. Quidot
Abstract | PDF file (466 KB)

Numerical analysis and experimental verification of vehicle trajectories p. 377
J.W. Wekezer and K. Cichocki
Abstract | PDF file (501 KB)

New testing techniques to obtain tensile stress-strain curves for a wide range of strain rates p. 385
S. Tanimura, K. Mimura and T. Umeda
Abstract | PDF file (587 KB)

Model of dynamic compression tests on hydraulic testing machines: Influence of dynamic phenomena p. 391
S. Diot, A. Gavrus, D. Guines and E. Ragneau
Abstract | PDF file (322 KB)

Testing with SHPB from quasi-static to dynamic strain rates p. 397
R. Othman, M.N. Bissac, P. Collet and G. Gary
Abstract | PDF file (373 KB)

Speckle measurements of sample deformation in the split Hopkinsons pressure bar p. 405
S.G. Grantham, C.R. Siviour, W.G. Proud, S.M. Walley and J.E. Field
Abstract | PDF file (569 KB)

Measurement of temperature coupling by thermovision and constitutive relation at high strain rates for the dual phase sheet steel p. 411
A. Rusinek, W.K. Nowacki, P. Gadaj and J.R. Klepaczko
Abstract | PDF file (453 KB)

Experimental study of temperature heterogeneity in metallic materials under high strain rate sollicitation p. 417
N. Ranc, V. Pina, P. Hervé, L. Taravella and P. F. Louvigné
Abstract | PDF file (469 KB)

A hydrodynamic hat specimen to investigate pressure and strain rate dependence on adiabatic shear band formation p. 423
H. Couque
Abstract | PDF file (783 KB)

Experimental approach to determine dynamic plasticity of micro-materials p. 429
T. Auzanneau and C. Sato
Abstract | PDF file (826 KB)

Dynamic behavior of viscous fluid at high rate of shear using through bar method p. 435
K. Ogawa
Abstract | PDF file (359 KB)

A study of cellular structures under impact loading p. 441
S. Abdennadher, H. Zhao and R. Othman
Abstract | PDF file (487 KB)

Experimental analysis of fresh concrete under dynamic loading p. 447
S. Pattofatto, H. Zhao and A. Poitou
Abstract | PDF file (334 KB)

Analysis of the dynamic plane shear test of sheet metals at large strains p. 453
R. Merle, H. Zhao and A. Awade
Abstract | PDF file (550 KB)

High temperature high strain rate testing with a compressive SHPB p. 459
M. Apostol, T. Vuoristo and V.-T. Kuokkala
Abstract | PDF file (859 KB)

Damage quantification and experimental simulation of momentum trapped flyer plate and tensile split Hopkinson bar incipient failure experiments p. 465
W.R. Thissell, D.L. Tonks, E. Harstad, P. Maudlin, D. Schwartz, C.P. Trujillo and M.F. Lopez
Abstract | PDF file (890 KB)

On the optimisation of machining parameters for dry drilling of aeronautic aluminium alloy p. 471
G. List and F. Girot
Abstract | PDF file (413 KB)

Dynamic properties of solders and solder joints p. 477
C.R. Siviour, D.M. Williamson, S.J.P. Palmer, S.M. Walley, W.G. Proud and J.E. Field
Abstract | PDF file (858 KB)

Classic and symmetric Taylor impact Tungsten alloys p. 483
R.I. Hammond, W.G. Proud and J.E. Field
Abstract | PDF file (783 KB)

Measurement of the mechanical properties of car body sheet steels at high strain rates and non ambient temperature p. 489
W. Bleck and P. Larour
Abstract | PDF file (490 KB)

Progress in testing sheet material at high strain rates p. 495
E. Roos and U. Mayer
Abstract | PDF file (398 KB)

Measurement of the evolution of the axial strain distribution in Hopkinson specimens p. 501
P. Verleysen and J. Degrieck
Abstract | PDF file (449 KB)

Peripherally clamped centrally supported blast loaded circular plates: A precision test for code validation p. 507
T.J. Cloete, R. Ahmed and G.N. Nurick
Abstract | PDF file (765 KB)

A modified TAYLOR-test in combination with numerical simulations - a new approach for the determination of model parameters under dynamic loads p. 513
I. Rohr, H. Nahme and K. Thoma
Abstract | PDF file (389 KB)

A new dynamic test for the identification of high speed friction law using a gas-gun device p. 519
I. Nistor, O. Pantalé, S. Caperaa and C. Sattouf
Abstract | PDF file (410 KB)

Failure strain of expanding ring and its application to other expanding bodies p. 525
E. Bar-on and A. Ginsburg
Abstract | PDF file (441 KB)

Rate dependent fracture toughness of plastics p. 531
Z. Major and R.W. Lang
Abstract | PDF file (384 KB)

Determination of flow curves at high strain rates using the electromagnetic forming process and an iterative finite element simulation scheme p. 537
A. Brosius, C. Beerwald and M. Kleiner
Abstract | PDF file (584 KB)

High strain rate testing of aluminium alloy & high speed photography p. 543
M. Lambert, C. Froustey, J.L. Charles and J.L. Lataillade
Abstract | PDF file (854 KB)

Experimental study on the material dynamic fracture properties by Instrumented Charpy Impact test with single specimen method p. 551
F. Jian, D. Fulian and W. Chengzhong
Abstract | PDF file (369 KB)

Dynamic experimental investigations of composites p. 559
A.N. Polilov, A.F. Melshanov, N.A. Tatous and N.A. Makhutov
Abstract | PDF file (389 KB)

Numerical analysis of interruption process of dynamic tensile tests using a Hopkinson bar p. 565
R. González Lezcano, Y.E. Essa and J.L. Pérez-Castellanos
Abstract | PDF file (526 KB)

Anisotropic ductile failure in titanium alloy at quasi-static and high strain rates p. 571
A.A. Mir, D.C. Barton, T.D. Andrews and P. Church
Abstract | PDF file (293 KB)

Metals behavior under passage of impulse electric current p. 577
G. Stepanov, A. Babutsky and L. Krushka
Abstract | PDF file (394 KB)

Localized-impact damage caused by proton bombarding in mercury target p. 583
M. Futakawa, H. Kogawa, S. Ishikura, H. Kyudo and H. Soyama
Abstract | PDF file (669 KB)

Experimental method to determine fragmentation properties of materials p. 589
A.K. Zhiembetov, A.L. Mikhailov and G.S. Smirnov
Abstract | PDF file (774 KB)

Modeling projectile impact onto prestressed ceramic targets p. 597
T.J. Holmquist and G.R. Johnson
Abstract | PDF file (776 KB)

Experiments and simulations of penetration into granite by an aluminum shaped charge p. 603
M.J. Murphy, G. Randers-Pehrson, R.M. Kuklo, T.A. Rambur, L.L. Switzer and M.A. Summers
Abstract | PDF file (1.01 MB)

An engineering model on penetration of eroding rods into ceramic/polymer composite p. 609
R. Zaera, A. Arias and C. Navarro
Abstract | PDF file (361 KB)

Failure dynamics: New area of research p. 615
J.R. Klepaczko
Abstract | PDF file (651 KB)

Armoured vehicles subject to mine explosions - an analysis method for operationability and survivability p. 621
B. Langrand, E. Deletombe, J.-L. Charles, J.-F. Sobry, S. Martin and H. Chazal
Abstract | PDF file (968 KB)

Numerical and experimental study of the impact of small caliber projectiles on ballistic soap p. 627
G. Dyckmans, N. Ndompetelo and A. Chabotier
Abstract | PDF file (718 KB)

High-velocity impact loading of thick GFRP blocks p. 633
H.-J. Ernst, Th. Merkel, Th. Wolf and K. Hoog
Abstract | PDF file (984 KB)

High energy impact on woven laminates p. 639
J. López-Puente, R. Zaera and C. Navarro
Abstract | PDF file (625 KB)

Impacts on foam stabilised composite structures: Experimental and numerical study p. 645
S. Rivallant, J.F. Ferrero and J.J. Barrau
Abstract | PDF file (533 KB)

High velocity impact resistance of composite materials p. 651
Jo Justo and A. T. Marquer
Abstract | PDF file (461 KB)

Wave propagation in lightweight composite armor p. 657
S. Abrate
Abstract | PDF file (576 KB)

An experimental, metallurgical and modelling analysis of silver and copper explosively formed projectiles (EFPs) p. 663
J. MacMahon, P. Church, I. Cullis, S. Findlay, A. Hart and M. Wickenden
Abstract | PDF file (830 KB)

Impact of shipbuilding steel plates with an initial tensile stress p. 669
V. Grolleau, L. Mahéo and G. Rio
Abstract | PDF file (433 KB)

Damage and rupture of anisotropic metals for the dynamic and the crash of vehicles p. 675
P. Croix, F. Lauro, B. Bennani and J. Oudin
Abstract | PDF file (556 KB)

Numerical study of the transition from rigid to eroding-rod penetration p. 681
Z. Rosenberg and E. Dekel
Abstract | PDF file (425 KB)

Failure mechanisms in ductile and brittle materials during Taylor impact p. 687
D.D. Radford, G.R. Willmott, S.M. Walley and J.E. Field
Abstract | PDF file (890 KB)

Impact resistance of AA6005 panels p. 693
A.H. Clausen, T. Borvik, O.S. Hopperstad and M. Langseth
Abstract | PDF file (610 KB)

Prediction of the effect of temperature on impact damage in carbon/epoxy laminates p. 699
T. Gómez del Río, R. Zaera and C. Navarro
Abstract | PDF file (557 KB)

Dynamic and quasi-static deformation of aluminium honeycomb sandwich panel in three point bending p. 705
H. Kobayashi, M. Daimaruya and Y. Takaya
Abstract | PDF file (589 KB)

Static and dynamic fracture toughness of 25 mm thick single edge notch bend (SENB) specimen of C-Mn pressure vessel submerged arc weld metal and flaw assessment under dynamic loading p. 711
W. Xu and C.S. Wiesner
Abstract | PDF file (312 KB)

Experimental and numerical study in axial crushing of thin walled sections made of high-strength steels p. 717
N. Peixinho, N. Jones and A. Pinho
Abstract | PDF file (490 KB)

How the liner material metallurgical texture affects the shaped charge jet break-up time p. 723
E. Kirsch, J. Plesek and D. Gabriel
Abstract | PDF file (519 KB)

Wave aspects of damage-failure transition and the problem of crack dynamics (experimental and theoretical study) p. 729
O.B. Naimark and S.V. Uvarov
Abstract | PDF file (533 KB)

Determination of dynamic stress intensity factor of C/C-SiC composites p. 735
U. Mayer, K. Srivastava and K. Maile
Abstract | PDF file (670 KB)

Influence of the tribological phenomenon on the tool wear in dry drilling of aluminum alloy AA2024 T351 p. 741
M. Nouari, G. List and F. Girot
Abstract | PDF file (579 KB)

Bond strength of pressure sensitive adhesives for CFRP aluminium-alloy hybrid beams under impact loading p. 747
C. Sato
Abstract | PDF file (837 KB)

Post shock mechanical behavior of fcc and bcc metals: Application to copper and tantalum p. 755
F. LIorca and G. Roy
Abstract | PDF file (438 KB)

The influence of temperature, strain rate history and shock preloading in the region of phase transition for armco-iron p. 761
A.M. Bragov, S. Brichikov, G.T. Gray III, E. Kozlov, A.K. Lomunov, A. Petrovtsev and V. Sergeichev
Abstract | PDF file (461 KB)

Dynamic properties of AerMet $^{\tiny\circledR}$ 100 steels to 25 GPa p. 767
L.C. Chhabildas and W.D. Reimhart
Abstract | PDF file (416 KB)

Influence of shock-wave profile shape (triangulai- "Taylor-wave" versus square-topped) on the spallation response of 316L stainless steel p. 773
G.T. Gray III, N.K. Bourne, B.L. Henrie and J.C.F. Millett
Abstract | PDF file (947 KB)

An investigation into spallation of titanium alloy using plate impact experiments and simulation p. 779
P. Church, I. Cullis, A. Bardilas, J. Cogar, W.G. Proud and R.I. Hammond
Abstract | PDF file (373 KB)

Wide range shock wave data for polyester syntactic foams p. 785
J. Ribeiro, J. Campos, R. Mendes and I. Plaksin
Abstract | PDF file (580 KB)

Measurement of strain heat in shock-loaded 304 stainless steel: Implications to powder consolidation p. 791
K.P. Staudhammer
Abstract | PDF file (412 KB)

Novelties in physics of explosive welding and powder compaction p. 797
I. Plaksin, J. Campos, J. Ribeiro, R. Mendes, J. Direito, D. Braga and R. Pruemmer
Abstract | PDF file (823 KB)

Dynamic compaction domain (shock compaction energy vs. $\rho_0/\rho$ ) for a Fe-15 atomic % Cu nanometric alloy obtained by mechanical alloying p. 803
R.G. Esquives, E.M. Orozco, C.T. Renero and D.V. Jaramillo
Abstract | PDF file (1.05 MB)

Multiscale modelling for equations of state p. 809
D. Porter and P.J. Gould
Abstract | PDF file (460 KB)

On the dynamic response of four polymers p. 815
N.K. Bourne, G.T. Gray III and J.C.F. Millett
Abstract | PDF file (483 KB)

Laser shock techniques to investigate shock-induced phase transitions in quartz p. 821
T. de Rességuier, P. Berterretche, M. Hallouin and J.P. Petitet
Abstract | PDF file (452 KB)

Reshock behavior of silicon carbide p. 827
D.P. Dandekar, W.D. Reinhart and L.C. Chhabildas
Abstract | PDF file (369 KB)

Shock properties of diamond and kimberlite p. 833
G.R. Willmott, W.G. Proud and J.E. Field
Abstract | PDF file (702 KB)

Impact response of titanium alloys at elevated temperatures p. 839
G.I. Kanel, S.V. Razorenov, E.B. Zaretsky and B. Hermann
Abstract | PDF file (452 KB)

Validation of a fracture model based on mesoscale approach for spalling of hard steel and aluminium alloy p. 845
X. Boidin, P. Chevrier and J.R. Klepaczko
Abstract | PDF file (483 KB)

Laser shock compression of copper monocrystals: Mechanisms for dislocation and void generation p. 851
M.A. Meyers, M.S. Schneider, B.K. Kad, V.A. Lubarda, F. Gregori, D.H. Kalantar and B.A. Remington
Abstract | PDF file (559 KB)

Dynamic properties of nitrogen alloyed 1045 iron-carbon-steel p. 857
E. Lach, H. Nahme and I. Rohr
Abstract | PDF file (502 KB)

Experimental study of A36 steel spall fracture p. 863
A.K. Zurek, J. Mata, E. Cerreta and C.P. Trujillo
Abstract | PDF file (737 KB)

Effect of shock wave hardening and cold working on mechanical properties of a new high nitrogen steel p. 869
E. Lach, A. Lichtenberger and F. Rondot
Abstract | PDF file (1.09 MB)

Response of iron to two symmetric laser shocks p. 875
T. de Rességuier and M. Hallouin
Abstract | PDF file (880 KB)

Shock wave experiments using a pulsed electron beam to study copper and molybdenum thermoelastic responses p. 881
F. Malaise, R. Courchinoux, B. Cassany and J.-M. Chevalier
Abstract | PDF file (378 KB)

Asymmetric collapse and micro-jetting in shock wave propagation in porous materials p. 887
J. Ribeiro, J. Campos, I. Plaksin, R. Mendes and J. Góis
Abstract | PDF file (708 KB)

Coalescence rate model for ductile damage in metals p. 893
D.L. Tonks, A.K. Zurek and W.R. Thissell
Abstract | PDF file (390 KB)

Anomalous diffusion increase in steel under shock loading p. 899
S.A. Atroshenko
Abstract | PDF file (757 KB)

Kinetics of mesostructure and reloading behavior of dynamically compressed solids p. 905
T.A. Khantuleva, Yu.I. Mescheryakov and A.K. Divakov
Abstract | PDF file (436 KB)

Effect of shock-induced mesoscopic processes on dynamic strength of solids p. 911
Yu.I. Mescheryakov
Abstract | PDF file (396 KB)

Evidences of ductile and brittle responses of ceramics under shock wave loading p. 917
E.B. Zaretsky, V.E. Paris, G.I. Kanel and A.S. Savinykh
Abstract | PDF file (354 KB)

Phase transformations in Ni ₃AI, Ti ₃AI and Ti ₂AINb intermetallics under shock-wave loading p. 923
N.V. Kasantseva, B.A. Greenberg, A.A. Popov and E.V. Shorokhov
Abstract | PDF file (1.11 MB)

On the Strength of $\gamma$ -titanium aluminides during shock loading p. 929
J.C.F. Millett, N.K. Bourne, G.T. Gray III and I.P. Jones
Abstract | PDF file (547 KB)

Explosive treatment application for production of metal-polymer composite materials p. 935
V.N. Goulbin, N.A. Adamenko, Y.P. Trykov, A.V. Fetisov and A.V. Kazurov
Abstract | PDF file (252 KB)

Using dynamic methods for compaction of particulate composite materials p. 941
V. Popov, S. Kaloshkin, A. Aksenov, V.N. Goulbin and V. Ivanov
Abstract | PDF file (1.74 MB)