---

Journal de Physique IV (Proceedings)

Vol. 12 No. 8 (September 2002)

Structural Materials for Hybrid Systems: A Challenge in Metallurgy
Paris, France, October 29-31, 2001

D. Gorse, J.-L. Boutard

ISBN 2-86883-617-8

---

• Preface     p. III
  D. Gorse and J.-L. Boutard
  Abstract
  
  
• SINQ layout, operation, applications and R&D to high power     p. 3
  G.S. Bauer, Y. Dai and W. Wagner
  Abstract | PDF file (2.07 MB)



• MEGAPIE target design and LiSoR experiment - Status report     p. 27
  T. Auger, L. Aphecetche, A. Cadiou, Y. Dai, H. Glasbrenner, F. Gröschel and T. Kirchner
  Abstract | PDF file (1.81 MB)



• Status of CEA studies on spallation target materials for the neutron source of accelerator driven systems     p. 45
  R. Enderlé, Y. Poitevin, J.-P. Deffain and J. Bergeron
  Abstract | PDF file (841 KB)



• Irradiation effects and consequences on in - service properties under proton and neutron mixed spectra: An overview     p. 59
  P. Jung
  Abstract | PDF file (265 KB)



• Residual nuclei produced by spallation reactions     p. 63
  C. Villagrasa, A. Boudard, J.-C. David, L. Donadille, J.-E. Ducret, B. Fernandez, R. Legrain, S. Leray, C. Volant, W. Wlazlo, P. Armbruster, T. Enqvist, F. Hammache, B. Jurado, K. Helariutta, K.-H. Schmidt, K. Sümmerer, M.-V. Ricciardi, F. Vivès, C.-O. Bacri, M. Bernas, B. Berthier, L. Ferran, L. Audouin, B. Mustapha, F. Rejmund, C. Stéphan, J. Taieb, L. Tassan-Got, J. Benlliure, E. Casarejos, M. Fernandez, J. Pereira, S. Czajkowski, D. Karamanis, M. Pravikoff, J. George, R.A. Mewaldt, N. Yanasak, M. Wiedenbeck, J. Conne, T. Faestermann, A. Heinz and A. Junghans
  Abstract | PDF file (682 KB)



• Effects of iron spallation products Ti, P and S on the physical metallurgy of 9Cr martensitic steels     p. 75
  O. Danylova, Y. de Carlan, D. Hamon, J.-C. Brachet, J. Henry and A. Alamo
  Abstract | PDF file (917 KB)



• Consequences of calcium and sulphur spallation product recoils in 9Cr-1Mo steel: Simulation by ion implantation     p. 85
  G. Amiri, M.-O. Ruault, J. Henry, H. Bernas, E. Cadel and P. Pareige
  Abstract | PDF file (1.20 MB)



• Experimental simulation of spallation elements production in a 9Cr-1Mo martensitic steel: 3D atom probe characterisation     p. 93
  E. Cadel, P. Pareige and M.-O. Ruault
  Abstract | PDF file (855 KB)



• Tensile properties and microstructure of 9Cr-1Mo martensitic steels containing a high helium concentration     p. 103
  J. Henry, P. Jung, J. Chen and J.-C. Brachet
  Abstract | PDF file (4.48 MB)



• Control and monitoring of oxygen content in molten metals. Application to lead and lead-bismuth melts     p. 123
  V. Ghetta, J. Fouletier, M. Henault and A. Le Moulec
  Abstract | PDF file (1.08 MB)



• Oxygen control in lead-bismuth eutectic: First validation of electrochemical oxygen sensors in static conditions     p. 141
  J.-L. Courouau, P. Deloffre and R. Adriano
  Abstract | PDF file (855 KB)



• Analysis of the stability of native oxide films at liquid lead/metal interfaces     p. 155
  C. Lesueur, D. Chatain, C. Bergman, P. Gas and F. Baque
  Abstract | PDF file (945 KB)



• Preliminary study of some parts of the quinary system Bi-Fe-Hg-O-Pb     p. 163
  A. Maitre, J.-M. Fiorani, J.-J. Kuntz and J.-C. Gachon
  Abstract | PDF file (1.18 MB)



• Corrosion of metallic materials in flowing liquid lead-bismuth     p. 177
  F. Balbaud-Celerier, P. Deloffre, A. Terlain and A. Rusanov
  Abstract | PDF file (1.95 MB)



• Influence of long term exposure to molten lead on the microstructure and mechanical behaviour of T91 steel     p. 191
  F. Gamaoun, M. Dupeux, V. Ghetta, J.-L. Pastol, C. Leroux, S. Guerin and D. Gorse
  Abstract | PDF file (1.68 MB)



• Resistance to corrosion an embrittlement of T91 steel in stagnant Pb-Bi of eutectic composition     p. 203
  J.-L. Pastol, P. Plaindoux, C. Leroux, S. Guerin, S.B. Goryachev, D. Gorse, F. Gamaoun, M. Dupeux and V. Ghetta
  Abstract | PDF file (2.05 MB)



• The risk of liquid metal embrittlement of the Z10CDNbV 9-1 martensitic steel     p. 217
  J.-B. Vogt, G. Nicaise, A. Legris and F. Foct
  Abstract | PDF file (796 KB)



• Liquid metal penetration in metallic polycrystals: New tools for a challenging unsolved problem of materials science     p. 229
  J. Bernardini, J.-P. Monchoux, D. Chatain and E. Rabkin
  Abstract | PDF file (1.12 MB)



• The structure of the solid-liquid interface: Atomic size effect     p. 239
  P. Geysermans and V. Pontikis
  Abstract | PDF file (602 KB)



• Liquid metal embrittlement studies on model systems to the spallation target technology: The importance of nanometre-thick films     p. 249
  K. Wolski, V. Laporte, N. Marie and M. Biscondi
  Abstract | PDF file (1.37 MB)



• Examples of liquiq metal embrittlement in industrial aluminium alloys     p. 263
  Y. Bréchet, A. Rodine, M. Véron, S. Péron and A. Deschamps
  Abstract | PDF file (1.79 MB)



• Electron microscopy and Auger spectroscopy study of the wetting of the grain boundaries in the systems Mo-Pb, Mo-Sn, Mo-Ni and Ni-Pb     p. 277
  A. Charai, Kutcherinenko, J.-M. Pénisson, V. Pontikis, L. Priester, K. Wolski and T. Vystavel
  Abstract | PDF file (1.35 MB)



• Liquid metal penetration at grain boundaries: Characterization by synchrotron radiation micro-radiography and micro-fluorescence     p. 289
  W. Ludwig, D. Bellet, J. Teyssier, J. Ouillier, N. Marie, K. Wolski, A. Simionovici and C. Rau
  Abstract | PDF file (1.18 MB)

---

© EDP Sciences 2002