Le Journal de Physique IV

Vol. 11 No. PR4 (Septembre 2001)

4^th European Mechanics of Materials Conference on Processes, Microstructures and Mechanical Properties

• Nanostructured recycled hardmetals     p. Pr4-3
  F. Arcuri, R. Ricceri and P. Matteazzi
  Abstract | PDF file (205.9 KB)



• Processing and characterisation of nanocrystalline iron aluminide coatings prepared by thermal spraying of milled powders     p. Pr4-11
  T. Grosdidier, H. L. Liao, S. Lenhard, A. Tidu and S. Revol
  Abstract | PDF file (1.457 MB)



• Investigation of mechanical properties in cryomilled dispersion strengthened aluminium     p. Pr4-19
  A. Soreng, J.I. Moe and E. Hellum
  Abstract | PDF file (421.3 KB)



• Microstructure evolutions in pearlitic steels and Cu/Nb wires resulting from severe plastic deformation during drawing     p. Pr4-27
  X. Sauvage, L. Thilly and D. Blavette
  Abstract | PDF file (716.0 KB)



• Optimization of high strength materials : Design of the engineering parameters through the nanostructure characterization     p. Pr4-33
  L. Thilly, F. Lecouturier, M. Véron, E. Snoeck, J.P. Peyrade and S. Askénazy
  Abstract | PDF file (1.856 MB)



• Influence of the heat treatment of the melt on the structure and mechanical behaviour of metallic glass ribbons     p. Pr4-41
  M. Calvo-Dahlborg, J.M. Ruppert, E.D. Tabachnikova, V.Z. Bengus, U. Dahlborg, F. Häussler, V.E. Sidorov and P.S. Popel
  Abstract | PDF file (933.1 KB)



• Porous titanium obtained by P/M     p. Pr4-51
  R. Ricceri, F. Arcuri and P. Matteazzi
  Abstract | PDF file (1.298 MB)



• Texture and crystallite microstrain development during tensile deformation of copper - simulation and comparison to experimental results     p. Pr4-61
  S. Aris, R.V. Martins, J. Wegener, V. Honkimäki and A. Pyzalla
  Abstract | PDF file (293.4 KB)



• Recrystallization kinetics and associated textures of Cu-bearing Ti-IF steels     p. Pr4-69
  S. Diligent-Berveiller, E. Aeby-Gautier, P. Weisbecker, M.H. Mathon, T. Iung, H. Réglé and P. Zimmer
  Abstract | PDF file (742.2 KB)



• Effect of solutes on the dynamic recrystallization microstructure of nickel     p. Pr4-77
  R. Le Gall, P. Bocher, B. Verlinden and J.J. Jonas
  Abstract | PDF file (488.6 KB)



• Final textures in cold rolled Zr702α polycrystalline samples     p. Pr4-83
  H. Francillette, B. Bacroix, R .A. Lebensohn and J.L. Béchade
  Abstract | PDF file (813.7 KB)



• Effect of cold rolling on the transition texture of commercially pure titanium     p. Pr4-91
  N. Gey, M. Humbert and A.K. Singh
  Abstract | PDF file (378.6 KB)



• Influence of hydrostatic recrystallization on the microstructure and mechanical properties of ultra-high molecular weight polyethylene     p. Pr4-99
  C. G'Sell, B. Lagathu, C. Cunat, J. von Stebut and D. Mainard
  Abstract | PDF file (1.432 MB)



• Mechanical behaviour and microstructural evolution of a microalloyed C-Mn steel during hot forming process     p. Pr4-107
  P. Thibaux, D. Jouaffre, D. Feuillu, Y. Chastel and A.-M. Chaze
  Abstract | PDF file (711.1 KB)



• Incorporation of microstructure and texture models into FEM     p. Pr4-115
  H. Aretz, R. Luce, M. Wolske, R. Kopp, M. Gördeler, G. Pomana and G. Gottstein
  Abstract | PDF file (303.8 KB)



• Modelling of full-scale industrial rolling and recrystallisation of strips of alloy 3103     p. Pr4-123
  H.E. Vatne, F. Perocheau, H.-E. Ekström, L. Poizat, E. Nes, J. Hagström, M. Lyttle and T. Furu
  Abstract | PDF file (773.4 KB)



• Extrusion of different aluminium alloys ; experimental work and modelling treatments     p. Pr4-131
  T. Furu, D.H. Bratland, H.E. Vatne, S. Abtahi, B. Bengtsson and J. Hou
  Abstract | PDF file (344.1 KB)



• Formation of martensite - austenite constituents in the intercritically reheated HAZ of a HSLA steel     p. Pr4-141
  A. Lambert, P. Maugis, A.F. Gourgues, T. Sturel and A. Pineau
  Abstract | PDF file (418.8 KB)



• Diffusional phase transformations in steel - theory and application to continuous casting     p. Pr4-149
  E. Gamsjäger, C.M. Chimani, F.D. Fischer and J. Svoboda
  Abstract | PDF file (1.613 MB)



• Microstructure and residual stresses issued from the bonding of an austenitic onto a ferritic steel by solid diffusion     p. Pr4-157
  H. Burlet, M. Martinez and G. Cailletaud
  Abstract | PDF file (734.2 KB)



• Transformation plasticity in titanium alpha double prime martensite     p. Pr4-165
  O.M. Ivasishin and R.V. Teliovich
  Abstract | PDF file (1.138 MB)



• Transformation induced plasticity in martensitic transformation of ferrous alloys     p. Pr4-173
  S. Grostabussiat, L. Taleb, J.F. Jullien and F. Sidoroff
  Abstract | PDF file (310.0 KB)



• Bainitic transformation under stress in medium alloyed steels     p. Pr4-181
  M. Veaux, J.C. Louin, J.P. Houin, S. Denis, P. Archambault and E. Aeby-Gautier
  Abstract | PDF file (1.176 MB)



• Study of the martensitic transformation on a Cr-Ni-Mo-Al-Ti steel for different thermomechanical paths     p. Pr4-189
  F. Azzouz, G. Cailletaud, F.D. Fischer, A. Pineau and K. Tanaka
  Abstract | PDF file (885.8 KB)



• Adaptive composites with embedded shape memory alloys     p. Pr4-197
  M. Parlinska, H. Clech, J.A. Balta, V. Michaud, J.-E. Bidaux, J.-A.E. Manson and R. Gotthardt
  Abstract | PDF file (4.200 MB)



• CuZnAl single crystals pseudoelastic behaviour under biaxial tensile loading: Observations and analysis     p. Pr4-205
  A. Vivet and C. Lexcellent
  Abstract | PDF file (3.085 MB)



• Microstructural modifications and material response in machining of steels     p. Pr4-213
  B. Changeux and J.-L. Lebrun
  Abstract | PDF file (4.720 MB)



• Physical modelling of microstructure and mechanical properties of dual-phase steel     p. Pr4-223
  O. Bouaziz, T. lung, M. Kandel and C. Lecomte
  Abstract | PDF file (3.466 MB)



• High strength microstructural forms developed in titanium alloys by rapid heat treatment     p. Pr4-233
  O.M. Ivasishin
  Abstract | PDF file (4.306 MB)



• A low cost metastable beta titanium alloy: Thermal treatments, microstructures and mechanical properties     p. Pr4-241
  F. Prima, P. Vermaut, I. Thibon, J. Debuigne and D. Ansel
  Abstract | PDF file (4.181 MB)



• Experimental and numerical analysis of the effects of process parameters on the properties of components in metal injection molding     p. Pr4-249
  Th. Barriere, D. Renault and J.C. Gelin
  Abstract | PDF file (3.723 MB)



• A generalised sliding wear model for inhomogeneous coatings     p. Pr4-257
  W. Yan, E.P. Busso and N.P. O'Dowd
  Abstract | PDF file (3.330 MB)



• Localization of deformation in polycrystalline ice     p. Pr4-267
  P. Mansuy, A. Philip and J. Meyssonnier
  Abstract | PDF file (4.973 MB)



• Mechanical behaviour of a semicrystalline polymer before necking     p. Pr4-275
  N. Brusselle-Dupend, D. Lai, X. Feaugas, M. Guigon and M. Clavel
  Abstract | PDF file (2.603 MB)



• Stacking fault energy (s.f.e.) and grain size effects (d) on the tensile behaviour of f.c.c. polycrystalline alloys at 300 K: Back stress and effective stress evolutions     p. Pr4-283
  H. Haddou, C. Gaudin and X. Feaugas
  Abstract | PDF file (4.693 MB)



• Study of the cyclic softening of an under-aged gamma'-precipitated nickel-base superalloy (Waspaloy)     p. Pr4-293
  M. Risbet, X. Feaugas and M. Clavel
  Abstract | PDF file (4.040 MB)



• Behavior of the nitrogen bearing martensitic stainless steel: XD15NW in cryotechnical environment     p. Pr4-303
  L. Manes, J.M. De Monicault and R. Gras
  Abstract | PDF file (4.045 MB)



• Analysis of texture effects on fatigue behaviour of 316L stainless steel     p. Pr4-311
  P. Villechaise, M. Mineur and J. Mendez
  Abstract | PDF file (5.081 MB)



• Tensile and fatigue properties as influenced by environment of a FeAl alloy prepared by mechanical alloying     p. Pr4-321
  A. Tonneau and G. Hénaff
  Abstract | PDF file (4.072 MB)



• Identification of a microstructural model for steels subjected to large tensile and/or simple shear deformations     p. Pr4-329
  H. Haddadi, S. Bouvier and P. Levée
  Abstract | PDF file (4.209 MB)



• Shear band instabilities in compacted metal powder with or without interparticle cohesion     p. Pr4-339
  V. Tvergaard and P. Redanz
  Abstract | PDF file (2.979 MB)



• The influence of the microstructure on the effective properties of duplex-type materials under purely thermal loading     p. Pr4-349
  V.V. Silberschmidt and E.A. Werner
  Abstract | PDF file (3.739 MB)



• Mechanical behaviour of alloys containing stable or evolving heterogeneous arrangements of particles     p. Pr4-357
  J. Lépinoux and Y. Estrin
  Abstract | PDF file (3.933 MB)



• A theoretical investigation of the contribution of texture and dislocation sheets on strain path change effects in BCC metals     p. Pr4-365
  B. Peeters, P. Van Houtte, S. R. Kalidindi and E. Aernoudt
  Abstract | PDF file (3.681 MB)



• Influence of the texture of soft magnetic materials on their magneto-elastic behaviour     p. Pr4-373
  N. Buiron, L. Hirsinger and R. Billardon
  Abstract | PDF file (3.745 MB)



• Comparison of physically based constitutive laws used for numerical simulations of plasticity of single crystals     p. Pr4-381
  P. Balland, L. Tabourot and M. Fivel
  Abstract | PDF file (3.646 MB)



• Modeling of amorphous solids by polyclustering technique     p. Pr4-389
  I. Dobovsek
  Abstract | PDF file (4.346 MB)